F65072M0P - Dishwasher AEG - Free user manual and instructions
Find the device manual for free F65072M0P AEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Built-in dishwasher |
| Brand | AEG |
| Model | F65072M0P |
| Height (mm) | 818 |
| Width (mm) | 596 |
| Depth (mm) | 550 |
| Net weight (kg) | 42 |
| Capacity (place settings) | 13 |
| Number of programs | 6 |
| Noise level (dB(A)) | 44 |
| Water consumption per cycle (L) | 9.5 |
| Annual energy consumption (kWh) | 234 |
| Voltage (V) | 220-240 |
| Frequency (Hz) | 50 |
| Maximum electrical power (W) | 2100 |
| Programs | Auto, Eco, Intensive, Quick 30 min, Rinse, Glass |
| Additional functions | Delayed start, Child lock, Salt and rinse aid indicator |
| Energy class | A+ |
| Maintenance and cleaning | Regular cleaning of filters, spray arms and door seal |
| Safety | Anti-leak system, child lock, automatic stop |
| Spare parts and repairability | Filters, spray arms, basket, seals available. Repairability index: 8.2/10 |
| Color | White |
Frequently Asked Questions - F65072M0P AEG
What are the available programs on the AEG F65072M0P dishwasher?
The AEG F65072M0P offers 6 programs: Auto (load detection), Eco (economical), Intensive (heavily soiled dishes), Quick 30 min, Rinse and Glass (for delicate glasses).
How to activate child lock?
To activate child lock, press and hold the Delayed start button for 3 seconds until the lock symbol appears. To deactivate, repeat the operation.
What to do if the dishwasher does not drain?
First check that the drain hose is not kinked or clogged. Clean the drain filter located at the bottom of the tub. If the problem persists, consult the manual for the corresponding error code.
How to clean the filters of the AEG F65072M0P?
The filters should be cleaned regularly. Remove the lower basket, unscrew the cylindrical filter and rinse it under running water. Make sure it is dry before putting it back in place.
What type of regenerating salt to use?
Use special dishwasher regenerating salt in granules. Do not use table salt or fine salt as it could damage the water softener.
Why does the dishwasher display an error code?
Error codes indicate a specific problem. For example, code E10 means a water fill problem, E20 a drain problem. Consult the 'Troubleshooting' chapter of the manual for the actions to take.
How to install the built-in dishwasher?
The appliance must be installed in a dedicated cabinet. Follow the built-in diagram: height 820-870 mm, width 600 mm, depth 570 mm. Attach the provided protective plate and connect the water and electricity supplies according to standards.
What to do if the dishes are not drying properly?
Check the rinse aid level and increase the dosage. Use the Extra Dry program if available. Make sure condensation drying is active (do not open the door immediately after the cycle ends).
How to maintain the spray arms?
The spray arms should be cleaned to avoid blockages. Unscrew the upper and lower arms, rinse the orifices under running water. You can use a toothpick to unclog the holes.
Where to find spare parts for this model?
Spare parts (filters, arms, seals, baskets) are available on the AEG website or from authorized dealers. Use the model number F65072M0P to identify compatible parts.
User questions about F65072M0P AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual F65072M0P - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. F65072M0P by AEG.
USER MANUAL F65072M0P AEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AEG
Model : F65072M0P
Category : Dishwasher