EWA3130YE - Kettle AEG - Free user manual and instructions
Find the device manual for free EWA3130YE AEG in PDF.
| Brand | AEG |
| Model | EWA3130YE |
| Product Type | Electric Kettle |
| Capacity | 1.7 liters |
| Power Rating | 2200 W |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Cordless Operation | Yes (360° swivel base) |
| Auto Shut-off | Yes, after boiling |
| Boil-Dry Protection | Yes |
| Heating Element | Concealed stainless steel |
| Water Level Indicator | Yes, with clear markings |
| Filter | Removable limescale filter |
| Lid | Push-button opening with wide mouth |
| Material | Stainless steel body and plastic handle |
| Dimensions (H x W x D) | 22 x 15 x 22 cm |
| Weight | 1.2 kg |
| Cord Length | 75 cm |
| Indicator Light | Yes (blue/white ring) |
| Safety Standards | CE, RoHS |
| Color | Stainless steel / Black |
Frequently Asked Questions - EWA3130YE AEG
User questions about EWA3130YE AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Kettle in PDF format for free! Find your manual EWA3130YE - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EWA3130YE by AEG.
USER MANUAL EWA3130YE AEG
WATERKETTLE MODEL EWA31xx D·GR·NL·F·GB
AEG
GB Instruction book .....11–15
Before using the appliance for the first time, please read the safety advice on page 12 carefully.

DG
Parts
D
- Close the lid and make sure it clicks into place. Otherwise, the automatic shut-off will not work reliably. Place the kettle on the base. Press the ON/OFF switch down; the indicator light will illuminate and the kettle will begin heating.
- Close the lid and make sure it locks properly. Otherwise, the automatic shut-off function will not work properly. Place the kettle on the base. Press the ON/OFF switch. The indicator light will illuminate and the kettle will begin heating.
- Close the lid so that it clicks into place properly. Otherwise, the automatic shut-off function will not work properly. Place the kettle on the base. Press the ON/OFF switch down; the indicator light will illuminate and the kettle will begin heating.
- Close the lid and make sure it is closed properly. If the lid is not properly engaged, the automatic shut-off will not work correctly. Place the kettle on its base. Press the on/off switch; the indicator light comes on and the kettle begins to heat.

D
- Depending on water hardness, the appliance should be descaled regularly. Fill the kettle with water and descaler according to the product instructions. Do not let the solution boil, as it may foam over. Then rinse the kettle thoroughly with fresh water.
- Descaling is recommended regularly, depending on water hardness. Fill the kettle with water and descaler according to the descaler's instructions. Do not boil the solution as it may overflow. Then rinse the kettle thoroughly with running water.
- Descale regularly, preferably depending on the hardness of the water. Fill the kettle with water and descaler, following the instructions for use of the descaling product. Do not let the solution boil, as it may foam. Afterwards, rinse the kettle thoroughly with clean water.
- It is recommended to descale regularly depending on the hardness of the water. Fill the kettle with water and descaler, following the instructions for use of the descaling product. Do not let the solution boil, as the foam formed could overflow. Then rinse the inside of the kettle thoroughly with clean water.
A. Jug B. Removable mesh filter C. Spout D. Lid E. Opening lid button F. Handle G. Water level indicator H. ON/OFF switch with indicator light I. Separate base and mains cable
Safety advice
GB
Read the following instructions carefully before using the appliance for the first time.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- The appliance may only be connected to a power supply whose voltage and frequency comply with the specifications on the rating plate!
- Never use or pick up the appliance if the supply cord is damaged, or the housing is damaged.
- The appliance must only be connected to an earthed socket. If necessary, an extension cable suitable for 10 A can be used.
- If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person, in order to avoid hazard.
• Always place the appliance on a flat, level surface. - Never leave the appliance unattended while connected to the supply mains. - The appliance must be switched off and the mains plug withdrawn each time after use, before cleaning and maintenance. - The appliance and accessories become hot during operation. Use only designated handles and knobs. Allow to cool down before cleaning or storage. - The mains cable must not come into contact with any hot parts of the appliance. - Do not immerse the appliance in water or any other liquid. Attention: If the kettle is overfilled, there is a risk that the boiling water may spray out, which could scald or burn! Therefore never fill the kettle above the maximum marking. - Never operate appliance with open lid. - Do not use or place the appliance on a hot surface or near source of heat. - Only use the kettle for heating water!
- The kettle can only be used with the stand provided.
- Appliance is for indoor use only.
- This appliance is intended for domestic use only. The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use.
Getting started
GB

- Before first use, wipe the inside and outside of the kettle with a damp cloth.

- Place the base unit on a firm and flat surface. Plug the mains plug into a wall socket. Redundant cord can be wound up at the bottom of base unit.

- Press the button to open the lid, pour water into the kettle. Make sure water level is visible in the water level indicator, but not exceeding the Max. mark.
D GR NL F
GB


- Close the lid and make sure it snaps in correctly. Otherwise the auto switch off function will not work reliably. Place the kettle onto the base. Press down the ON/OFF switch; the indicator light will illuminate and the kettle will start to heat up.

- The automatic switch off function. When the water has boiled or the kettle is moved from the base, it will switch off automatically. If you wish to stop the heating process before the water is boiling, simply lift up the ON/OFF switch to the OFF position.
Cleaning

GB
- Before cleaning, always unplug the appliance. Never rinse or immerse the kettle or base unit in water. Just wipe with a damp cloth, using no abrasive detergents. Occasionally rinse out the kettle with clean water.

- To clean the mesh filter, grab the strainer insert and lift out. Cleaning the base unit – superficial spots of rust may appear on the base unit. Remove with a stainless steel cleaning agent.

- Decalcifying is recommended regularly, depending on water hardness. Fill the kettle with water and decalcifier according to decalcifier product instructions. Do not boil the solution as it could foam over. Afterwards, rinse kettle thoroughly with fresh water.

Troubleshooting
GB
| Problem Possible cause Solution | ||
| The appliance switches off before boiling. | Too much lime scale at the base of the kettle. | Run the decalcifying procedure. |
| The appliance does not switch off . Close lid until it locks. | ||
| Instert the strainer correctly. | ||
| The appliance cannot be switched on. After operating with little or no water, the appliance has not cooled down sufficiently. | Allow to cool a short time and try again. | |
Disposal
GB
Disposal
Packaging materials
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose the packaging materials in the appropriate container at the community waste disposal facilities.
Old appliance
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
D
GR
NL
F
GB






D Germany
Electrolux Home Products Belgium
Floor Care Division
Bergensesteenweg, 719
1502 LEMBEEK
Tel.: 02/363 05 41
Belgium
WARRANTY CONDITIONS DECLARATION
Electrolux Home Products Belgium
Floor Care Division
Bergensesteenweg, 719
1502 LEMBEEK
Tel.: 02/363 05 41

















Printed on recycled paper
3482 A EWA31xx02031211
With Electrolux, the choice of professionals.
AEG