SA2250E - Refrigerator BRANDT - Free user manual and instructions

Brand	Brandt
Model	SA2250E
Product type	Refrigerator
Dimensions (H x W x D)	180 x 60 x 65 cm
Net weight	60 kg
Power supply	220-240 V, 50 Hz
Energy class	A+
Net capacity	250 L
Cooling type	Ventilated (No Frost)
Interior lighting	LED
Shelves	Adjustable glass shelves
Vegetable drawer	Vegetable drawer with humidity control
Reversible door	Yes, reversible
Adjustable feet	Yes, front
Defrost	Automatic (No Frost)
Noise level	42 dB
Recommended ambient temperature	16 °C - 43 °C
Supplied accessories	Ice cube tray, user manual
Maintenance and cleaning	Clean with a soft cloth and soapy water. Do not use abrasive products.
Safety	Child lock not available. Reversible door to adapt opening.
Spare parts and repairability	Spare parts available through Brandt after-sales service.

Frequently Asked Questions - SA2250E BRANDT

How to set the temperature of the Brandt SA2250E refrigerator?

The temperature is set using the thermostat located inside the appliance. Turn the knob to the desired position (usually 1 to 7). Position 3-4 is recommended for normal use.

What to do if the refrigerator does not cool enough?

Check that the ambient temperature does not exceed 43 °C, that the ventilation grilles are not blocked, and that the thermostat is set correctly. If the problem persists, contact after-sales service.

How to defrost the Brandt SA2250E refrigerator?

The SA2250E model is equipped with No Frost technology, which means it defrosts automatically. No manual action is required.

The refrigerator makes noise, is this normal?

A slight hum is normal (compressor and fan). If the noise is excessive, check that the appliance is level and not touching furniture. The noise level is 42 dB.

How to reverse the door opening direction?

The door is reversible. Unscrew the hinges, remove the door, reposition the hinges on the other side and reassemble the door. Follow the detailed instructions in the user manual.

What to do in case of a power outage?

Avoid opening the door. Food stays cold for about 4 hours. If the outage lasts longer, check the condition of the food.

How to clean the inside of the refrigerator?

Unplug the appliance. Remove shelves and drawers. Clean with a soft cloth and soapy water. Rinse and dry. Do not use abrasive cleaners or chemicals.

Does this refrigerator have a freezer compartment?

No, the Brandt SA2250E is a single refrigerator. It does not have a freezer compartment.

What is the capacity of this refrigerator?

The net capacity is approximately 250 liters, allowing food storage for a family of 3 to 4 people.

Where can I buy spare parts for the Brandt SA2250E?

Spare parts are available from Brandt after-sales service or on specialized websites. You can also contact an authorized dealer.

USER MANUAL SA2250E BRANDT

REFRIGERATOR

REFRIGERATOR

REFRIGERATOR

REFRIGERATOR

REFRIGERATOR

REFRIGERATOR

F

GB

NL

D

E

P

Dear customer,

Freezing and deep-freezing

EC - 73/23 EEC 19/02/73 (Low Voltage) and subsequent amendments;

Notes which are important for your safety or for the proper functioning of the appliance

Supplementary information regarding operation and practical applications of the appliance.

Tips and notes concerning economical and environmentally sound use of the appliance

Safety Instructions

This information has been provided in the interests of your safety. Please read it before installing or using the appliance. Please retain the instruction book for future reference. If ownership is transferred, please leave the user manual for the new owner.

Domestic Use

- The domestic refrigerators and freezers are designed to be used specifically for the storage of edible foodstuffs only.

- Check the appliance for transport damage. Under no circumstances should a damaged appliance be installed. In the event of damage please contact your retailer.

- This appliance is heavy. The edges and projecting parts of the cabinet may be sharp. Be careful when moving the cabinet and always use gloves.

- Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

- Make sure that the power plug is not squashed or damaged by the back of the appliance. Make sure that the cable is not trapped underneath the appliance, nor touches the motor.

- Do not remove the power cord by pulling on its lead, particularly when the appliance is being pulled out of its niche. If the power plug socket is loose, do not insert the power plug. Damage to the cord may cause a short-circuit, fire and/or electric shock.

- Do not use electrical appliances inside the appliance.

- Do not keep carbonated drinks or bottles in the freezer compartment. The glass bottles may break.

- Ice lollies can cause 'frost/freezer burns' if consumed straight from the freezer.

- It is dangerous to try and alter the specifications or modify this product in any way.

- Under no circumstances should you attempt to repair the appliance yourself. Refer to your local Service Centre, and always insist on genuine spare parts.

Child Safety

- This appliance is designed to be operated by adults only. Do not allow children to tamper with the controls or play with the product. There is a risk of suffocation! Keep packaging material away from children!

Environment Protection

- This appliance does not contain gases which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with urban refuse and rubbish. Avoid damaging the cooling unit. Information on your local disposal sites may be obtained from your municipal authorities.

Remove the plug and ensure that any locks or catches are removed, to prevent young children being trapped inside.

Disposal

Appliance Packaging Information

- The materials marked with the symbol are recyclable.

PE< for polyethylene, e.g. sheet wrapping material

PS< for polystyrene, e.g. padding material (always CFC-free)

POM< polyoxymethylene, e.g. plastic clips.

All materials are environmentally sound! Information concerning collection schedules or locations can be obtained from your local Council or Environmental Health Office.

Contents

Safety Instructions ....14

Disposal 14

Use and Control Before Use / Starting the appliance / Temperature control / Internal parts .....15

Food Protection / Hints 16

Freezer compartment - Temperature control / Hints 17

Maintenance Defrosting 17

Cleaning / Changing the light bulb 18

Something not Working / Customer Service and Spare Parts / Technical Specifications .....19

Installation Positioning / Electrical connection .....20

Door reversal Inner door reversal .....21

Building-in ....22

Use and Control

Before Use

Wait two hours before connecting the appliance to allow the oil to flow back in the compressor.

Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly.

Do not use detergents or abrasive powders, as these will damage the finish.

- Remove safety elements used for transportation.

Refrigerator compartment

Starting the appliance

- Insert the plug into the wall socket and turn the thermostat knob clockwise beyond position «O» (OFF).

- The thermostat control situated inside the fridge compartment regulates the temperature of the appliance.

- Turn the thermostat control to the required setting.

Temperature Control

- It allows you to adjust the temperature inside the refrigerator according to use and external conditions.

- Setting „1“ = highest temperature, warmest setting

- Setting „6“ = lowest temperature, coldest setting.

- Setting „0“ = Off

A medium setting is generally the most suitable.

Internal Parts

Storage shelves

- The shelves can be removed for cleaning.

- To permit storage of food packages of various sizes, the shelves can be placed at different heights.

- To remove the internal shelf, pull it forward until it can be tipped up or down and removed.

- To insert the shelf at a different height, do the same in reverse.

The glass shelf above the vegetable drawers and the bottle shelf should always remain in position to ensure correct air circulation.

• To permit storage of food packages of various sizes, the central door shelf can be adjusted in height.
• Gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required.

- For more thorough cleaning, the top and bottom door shelves can be removed by pulling them in the direction of the arrows, then refitting them in position.

FOOD PROTECTION

Explanation of the cold zone signs

The symbol shown here on the left indicates the coldest point inside your refrigerator.

Coldest area: below or equal to +4°C

Meat, poultry, fish, cold cuts, ready-to-eat meals, mixed salads, egg or cream based mixes and cakes, fresh pasta, cake mixes, pizzas/quiches, fresh foods and fresh-milk cheeses, vegetables ready to be used and packed in plastic bags, and all other fresh foods whose expiry date is associated with a preservation temperature below or equal to +4°C.

Temperature indicator

Thermostat must be adjusted to the right temperature.

With the temperature indicator you can keep a check that your refrigerator is working properly.

The indicator shows the "OK" symbol when the coldest area reaches a temperature that is below or equal to 4°C.

If the temperature is higher than 4°C the indicator is black, so you must adjust the thermostat to make the temperature drop.

ATTENTION: Keeping the refrigerator door open for a long time will cause the internal temperature to rise. To measure the temperature correctly, it should be read on the indicator within 30 seconds.

Hints

Saving Energy

• Pay careful attention to where the cabinet is placed. See the section "Installation". When installed correctly the cabinet will consume less energy.
• Try to avoid keeping the doors open for long periods or opening the doors too frequently as warm air will enter the cabinet and cause the compressor to switch on unnecessarily often.
• If the ambient temperature is high, the thermostat knob is on the coldest setting (higher numbers) and the appliance is fully loaded, the compressor may run continuously, causing frost or ice to form on the evaporator. If this happens, turn the knob to a warmer setting (lower numbers) to allow automatic defrosting and so a saving in electricity consumption.
• Do not place warm foods inside the appliance. Allow warm foods to cool first.
• Put frozen food in the fridge to defrost. The cold in the frozen food will then be used to cool the fridge.
• Keep the heat emitting condenser, the metal grille on the rear wall of your appliance, always clean.

Hints for refrigeration

- Do not store warm food or evaporating liquids in the refrigerator and do cover or wrap up the food, particularly if it has a strong smell.

To help you use your refrigerator correctly, here are some useful hints:

- Raw meat (beef, pork, lamb & poultry): wrap in polythene bags and place on top of the salad compartment, this being the coldest spot in the refrigerator.

Meat can only be stored safely in this way for one or two days at the most.

• Cooked food, cold cuts, jelly, etc.: these should be well covered and can be stored on any of the glass shelves.
• Fruit & vegetables: these should be thoroughly cleaned and placed in the bottom drawer.
• Butter & cheese: these should be placed in special airtight containers or wrapped in aluminium foil or polythene bags to keep out as much air as possible.

- Milk bottles: these should have a top and should be stored in the bottle rack on the door.

Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator.

Freezer compartment

Temperature Control

• To freeze fresh foods it is not necessary to change the setting of the thermostat knob.
• For a quicker freezing operation, turn the thermostat knob to the coldest setting; but remember that, in this condition, the refrigerator compartment temperature might drop below 0°C. If this occurs reset thermostat knob to a warmer setting.
• At the first starting-up or after a period out of use, before putting the products in the compartment, let the appliance run for at least two hours on the coldest setting, then turn the thermostat knob to the normal operating position.

Interior Accessories

Ice-cube production

This appliance is equipped with one or more trays for the production of ice-cubes.

Fill these trays with water, then put them in the freezer compartment.

Do not use metallic instruments to remove the trays from the freezer.

Maintenance

Unplug the appliance before carrying out any maintenance operation.

Warning

This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians.

Hints

Freezing of fresh food and storage of frozen food

• Prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required.
• Wrap up the food in aluminum foil or polythene and make sure that the packages are airtight.
• Do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter.
• Do not touch frozen food with wet hands. Your hands could stick to the food and cause skin abrasions.
• It is advisable to show the freezing-in date on each individual pack to enable you to keep track of the storage time.
• Be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the shortest possible time.
• Do not put carbonated liquids (fizzy drinks, etc.) in the freezing compartment as they may burst.
• Once defrosted, food deteriorates rapidly and cannot be refrozen.

Defrosting

Refrigerator compartment

- Defrosting the refrigerator compartment is automatic. The defrost water drains out through a trough into a container at the back of the appliance, above the motor compressor, where it evaporates.

- It is important to periodically clean the defrost water drain hole.

Freezer compartment

• Remove the frost with a plastic scraper.
• Whenever the thickness of the frost exceeds 5 mm complete defrosting should be carried out. Proceed as follows:
• Remove any stored food, wrap it in several layers of newspaper and put it in a cool place.
• Pull out the plug from the wall socket or turn the thermostat knob to the «O» setting.
• Leave the door open, place a basin on the top shelf of the refrigerator compartment, under the drain hole, remove the plug as shown in the figure.

• When defrosting is completed, dry the interior thoroughly and refit the plug.
• Turn the thermostat knob back to the required setting or replace the plug in the power socket.
• Reload the previously removed food into the compartment.

Never use sharp metal tools to scrape off frost from the evaporator as you could damage it.

Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer.

Cleaning

Never use metal objects for cleaning your appliance as it may get damaged.

NEVER use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as these will damage the surface and leave a strong odour.

Clean the inside with warm water and bicarbonate of soda. Rinse and dry thoroughly.

To guarantee a safe operation of the fridge, once a year remove the ventilation grille at the base and clean the air channels with a vacuum cleaner.

When the appliance is not in use

Disconnect the appliance from the electricity supply. Empty all foods and clean the appliance, leaving the doors ajar to prevent unpleasant smells.

Changing the light bulb

- Should the interior light fail to work, first switch off the appliance and disconnect from the electricity supply, then replace the bulb as follows:

1. unscrew the light cover securing screws.
2. unhook the moving part by pressing it as shown in the figure.

1. Replace the bulb with another of the same characteristics.

Something not Working

Problems may be due to causes which can easily be solved before calling the Technical Service. Please follow these instructions:

SYMPTOM SOLUTION
Door does not close	Level properly the appliances if it is not well levelled.Weight surpasses the storage limit of the door shelf so spread weight more evenly or take some products out.The appliance is not properly installed. Please look in the “Building-in” section.
It is too warm inside the refrigerator	Set a lower temperature.Distribute the food products to allow cold air to circulate around them.Make sure that the door is completely closed and that the insulating strip is complete and clean.The temperature where the cabinet is placed is above normal room temperature.
It is too cold inside the refrigerator.	Turn the temperature regulator to a warmer setting temporarily.
The compressor works continuously.	Turn the thermostat knob to a lower number.The temperature where the cabinet is placed is above normal room temperature.Check that the ventilation is sufficient and that the ventilation openings are unobstructed.The cause could be the introduction of large quantities of food and/or frequent opening/closing of the door.
There is water inside/outside the refrigerator.	Sometimes is normal. During automatic defrosting frost thaws on the cooling plate.
Water comes out on the floor.	Place the drain hose at the back of the cabinet above the drain bowl.
Noises	Sometimes this is normal. Temperature control may cause clicking sounds when the system is connected or disconnected.The injected cooling gas may produce a gurgling sound while passing through the tubes.The motor may cause a humming noise and/or slight bumping.The insulation material used has a tendency to slightly increase noise levels, how ever it allows for much better insulation and a lower energy consumption.

Customer service and spare parts

If you cannot find the remedy for a malfunction in these operating instructions, please contact your dealer or our customer service department and consult the Guarantee card.

Selective ordering of replacement parts can save unnecessary travel and costs.

For this reason always provide the following appliance information:

- Model Name

• Model Number (PNC)
• Serial Number (S-No.)

This information can be found on the rating plate inside the cabinet on the left hand wall. We recommend that you enter this information here, so that it is handy if needed.

Technical specifications

The technical data is indicated on the rating plate on the left side inside the appliance.

If there is a power failure when food is in the freezer, do not open the door of the freezer compartment. The frozen food will not be affected if the power cut is of short duration (up to 12 hours) and the freezer compartment is full, otherwise, it is recommended that the food should be used within a short time (a temperature increase of the frozen food shortens its safe storage period).

Installation

Take utmost care when handling your appliance so as not to cause any damages to the cooling unit with consequent possible fluid leakages.

• During normal operation, the condenser and compressor at the back of the appliance heat up considerably. Always ensure that there is adequate ventilation, as failure to do so will result in component failure and possible food loss. See installation instructions.
• Important: if the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

Positioning

• Unpack the cabinet and check that it is in good condition and free of any transport damage.
• The appliance must not be located close to radiators or gas cookers.
• Place the refrigerator away from direct sunlight and heat sources.
• For safety reasons, minimum ventilation must be as shown in Fig.

Attention: keep ventilation openings clear of obstruction.

- It is necessary that the niche is provided with a ventilation duct having the following dimensions:

Depth 50 mm

Width 540 mm

The climate classification can be found on the rating plate, which is located inside the cabinet on the left-hand wall.

The following table shows which ambient temperature is correct for each climate classification:

Climate classification	for an ambient temperature of
SN +10 to +32°C
N	+16 to +32°C
ST	+18 to +38°C
T	+18 to +43°C

When the ambient temperature is not included within the range indicated for the class of this appliance, the storage temperature in the appliance cannot be guaranteed; therefore it is advisable to use the food stored as soon as possible.

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply.

Voltage can vary by ±6% of the rated voltage.

For operation with different voltages, a suitably sized auto-transformer must be used.

Important

The appliance must be earthed.

The power supply cable plug is provided with a contact for this purpose.

If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a specialist technician.

The Manufacturer declines all responsibility if the above safety precautions are not observed.

This appliance complies with the following E.E.C. Directives:

- 87/308 EEC of 2/6/87 relative to radio interference suppression.

• 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications.
• 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

Attention!

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

Door reversal

The appliance's door has been locked in position for transport by means of pins on both sides. According to the door opening direction, remove relevant pins at the top and at the bottom.

If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.

Inner door reversal

Building-in

Dimensions of the recess

SA 1550 E SA 2250 E

Height of housing (1) 880 1225 mm

Depth of housing (2) 550 550 mm

Width of housing (3) 560 560 mm

It is necessary that the niche is provided with a conduct of ventilation having the following dimensions:

Depth 50 mm

Width 540 mm

1. Slide the appliance into the recess, pushing it against the wall on the handle side.

1. Apply joint the sealing strip as shown in figure.

1. Open the door and push the appliance against the side of the kitchen unit opposite to that of the appliance hinges. Fasten the appliance with the 4 screws (I) provided in the kit included with the appliance.

1. Snap the vent grille (B) and hinge cover (E) into position.

Apply covers (C-D) on the joint cover lugs and into the hinge holes.

1. Separate parts A, B, C, D as shown in the figure.

1. Place guide (A) on the inside part of the furniture door, up and down as shown in the figure, and mark the position of the external holes. After drilling the holes, fix the guide with the screws supplied.

1. Should the lining up of the furniture door be necessary, use the clearance of the slots. At the end of the operations, it is necessary to check if the door of the furniture closes properly.

1. Fix cover (C) on guide (A) until it clips into place.

1. Fix cover (D) on guide (B) until it clips into place.

1. Open the appliance door and the furniture door at 90°. Insert the small square (B) into guide (A). Put together the appliance door and the furniture door and mark the holes as indicated in the figure.

Remove the squares and drill holes with ∅ 2 mm at 8 mm from the outer edge of the door. Place the small square on the guide again and fix it with the screws supplied.

Installation

The machine is working.

Intec Four, Wade Road, Basingstoke, Hampshire RG24 8NE

Brochures and Stockist information: 08707 505 503

All other departments: 01256 308 000

Service fax: [phone]

Sales Order Processing fax: [phone]

Marketing and Home Economist fax: [phone]

Distributor in Ireland:

Quality Electrical Distributors Ltd

143b Slaney Close, Dublin Industrial Estate, Glasnevin, Dublin 11