TO100E - Basket ETNA - Free user manual and instructions
Find the device manual for free TO100E ETNA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Extractor hood |
| Brand | ETNA |
| Model | TO100E |
| Dimensions (L x P x H) | 60 x 50 x 12 cm (built-in hood) |
| Weight | 12 kg |
| Power supply | 220-240 V, 50 Hz |
| Motor power | 200 W |
| Lighting | 2 x LED 1 W |
| Max airflow | 650 m³/h |
| Max noise level | 65 dB(A) |
| Number of speeds | 3 |
| Operating mode | Extraction or recirculation |
| Grease filter type | Washable metal filter |
| Carbon filter | Optional (for recirculation) |
| Controls | Touch or buttons (depending on version) |
| Grease filter maintenance | Clean every month |
| Carbon filter maintenance | Replace every 6 months |
| Exterior cleaning | With a soft cloth and mild soap |
| Safety | Automatic shutdown in case of overheating |
| Spare parts available | Filters, bulbs, recirculation kit |
| Warranty | 2 years |
Frequently Asked Questions - TO100E ETNA
How to install the ETNA TO100E extractor hood?
Installation must be carried out by a qualified professional. Observe the safety distances: at least 65 cm above an electric hob and 75 cm for a gas hob. Securely fix the hood to the wall or under a cabinet depending on the model.
How to use the hood in recirculation mode?
For recirculation mode, install the carbon filter (optional) and direct the air into the room. Ensure the room is well ventilated. The carbon filter must be replaced every 6 months.
How to clean the grease filters?
The metal grease filters can be washed in the dishwasher or by hand with degreasing soap. Let them dry completely before putting them back. Clean them at least once a month.
Why is the hood noisy?
Noise can be caused by a blocked filter, a poorly installed exhaust duct, or a defective motor. Check and clean the filters, and ensure the installation is correct. The normal noise level is up to 65 dB.
How to replace the LED lighting?
The LED lighting is integrated. If a bulb no longer works, contact ETNA customer service for a spare part. Do not attempt to replace it yourself if you are not qualified.
The hood does not turn on, what should I do?
Check that the appliance is properly plugged in and the fuse has not blown. If the control does not respond, reset the hood by unplugging it for 10 minutes. If the problem persists, call a professional.
What is the safety distance to observe?
The minimum distance between the hood and the hob is 65 cm for electric hobs and 75 cm for gas or mixed hobs. This distance is essential to avoid fire risks.
How to adjust the hood speed?
Use the control buttons to select one of the 3 speeds. Speed 1 for gentle cooking, speed 2 for normal cooking, and speed 3 for strong odors or steam.
Can I use the hood without the carbon filter?
Yes, if the hood is installed in extraction mode to the outside, the carbon filter is not necessary. It is only required in recirculation mode to filter odors.
Where to find spare parts?
Spare parts (filters, bulbs, remote control) are available from ETNA after-sales service or on specialized websites. Always use original parts to ensure performance and safety.
User questions about TO100E ETNA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual TO100E - ETNA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TO100E by ETNA.
USER MANUAL TO100E ETNA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ETNA
Model : TO100E
Category : Basket