GS 372 - Dash cam AIPTEK - Free user manual and instructions

Product type	Dash camera
Brand	Aiptek
Model	GS 372
Dimensions	Approximately 8 x 5 x 3 cm
Weight	Approximately 80 g
Power supply	Built-in lithium-ion battery
Recording resolution	Full HD 1080p
Viewing angle	140 degrees
Storage support	microSD card (up to 32 GB)
Loop recording	Yes
Motion detection	Yes
Night vision	Yes, with infrared LED
Built-in GPS	No
Screen	2-inch LCD screen
Maintenance and cleaning	Clean the lens with a soft, dry cloth
Safety	Do not expose to extreme temperatures
Spare parts and repairability	Replaceable battery, mounting bracket available
General information	Recommended use with a 12V cigarette lighter charger

Frequently Asked Questions - GS 372 AIPTEK

How to install the Aiptek GS 372 dash camera?

Attach the mount to the windshield using the suction cup, insert a microSD card, plug in the 12V adapter, and mount the camera on the bracket.

How to activate loop recording?

Loop recording is enabled by default. You can configure it in the settings for 1, 3, or 5-minute segments.

Which microSD card to use?

Use a Class 10 microSD card with a maximum capacity of 32 GB. Format it in the camera before first use.

How to view recordings?

Remove the microSD card and insert it into a computer, or connect the camera via the provided USB cable.

Does the battery last long?

The built-in battery allows about 30 minutes of use without an external power source. For continuous use, plug it into the cigarette lighter.

How to activate night vision?

Night vision activates automatically in low light. You can also force it via the settings menu.

What to do if the device does not turn on?

Check that the battery is charged or plug in the adapter. If the problem persists, reset the device using the reset button.

How to protect important files?

Enable motion detection or the G-sensor to automatically lock files during an impact.

Can I use the camera without an SD card?

No, a microSD card is essential to store recordings.

How to clean the lens?

Use a soft, dry cloth without solvent. Avoid touching the lens with your fingers.

USER MANUAL GS 372 AIPTEK

Thank you very much for purchasing this product. Before you start, you are recommended to read this manual step by step to obtain the best results with your new auto camcorder. We hope you enjoy it.

AIPTEK Team

About the Product

GS 372 is specifically designed for video recording whilst driving. In the case of an emergency, the embedded bump sensor automatically detects the accident and saves the action on protected memory. Unlike most dashcams, the rear-view mirror design and invisible LCD display allow GS 372 to be kept permanently in the car without being mounted and dismounted for each trip. The extra-large and anti-glare mirror provides a better rear view to enhance driving safety. Built-in with 130° wide-angle and adjustable lens, GS 372 works perfectly with both passenger cars and trucks. With Full HD resolution, GS 372 records full action on the road in the best quality.

Important Notice

1. Please do not install this auto camcorder at a place that would obstruct or reduce a driver's view. Make sure your usage complies with the vehicle codes of your state or country.
2. Do not drop, puncture or disassemble the device and charger; otherwise the warranty will become void.
3. Avoid all contact with liquids. Dry your hands before using the device.
4. Use the device with care. Avoid pressing hard on the device body.
5. Only use the accessories supplied by the manufacturer.
6. Keep the device out of the reach of infants.
7. When you get out of the car, do not leave the device on the dashboard where it is subject to direct sunlight or extreme

temperatures (too high or too low) which tend to degrade or damage the unit and it's normal functionality.

1. For your own safety, do not operate the controls of the product while driving. This product is intended to be used as an auto camcorder aid only.
2. The cigarette lighter of your car may or may not continue to supply power after the engine is turned off. Please disconnect the charger from the cigarette lighter before leaving the car to prevent the car's battery from going flat or other accidents.
3. The battery of the car camcorder is integrated in the device. Do not dissemble and modify the device. The battery should be replaced by an authorized service center only.
4. For software or manual update, please visit the official website: http://www.aiptek.eu

If the time arises to throw away your product, please recycle all the components possible. Batteries and rechargeable batteries are not to be disposed in your domestic waste! Please recycle them at your local recycling point. Together we can help to protect the environment.

Package Content

• GS 372
- User's Manual

• Car charger
• Warranty card

- USB cable

Product Overview

① LCD display
② Emergency Record / Exit
③ ▲Up / ▶Playback
④ ▼Down / MMenu / Snapshot
⑤ OK / Record or Stop
⑥ Power On /Off
⑦ AV-Out

⑧ MicroSD card slot
⑨ Power connector / Mini USB port
⑩ GPS connector (optional, inactive)
⑪ LED Indicator
⑫ Clamps
⑬ Speaker
⑭ Camera lens
⑮ Reset

Use a Memory Card

1. Use a MicroSD card with at least Class 6 and 8 GB, Max. 32 GB.
2. Insert and remove the memory card when the camcorder is turned off. Do not remove the memory card while recording. This may damage the memory card.
3. Be sure to format the MicroSD card before the initial usage to ensure read / write stability.
4. We strongly recommend that the memory card is strictly used for this car camcorder only.

Connect the Power

1. Connect one end of the car charger to the mini USB connector on the car camcorder.
2. Plug the other end of the car charger into the cigarette lighter socket of your car. When power is available on the cigarette lighter (usually when the engine is started), the camcorder automatically turns on.
3. You can manually turn on the car camcorder by pressing the power button ⏻ for 1 second or turn it off by pressing the button for 6 seconds.

Install the Car Camcorder

1. Follow the instructions to pull the two clamps on the top of GS 372 and mount it onto the rear-view mirror of your car.

1. Adjust the mirror to have a clear rear view.
2. Adjust the lens on the front side to focus on the center of the street without obstruction.

Screen Icons

Set Language

1. Press ▼ to enter Menu (M).
2. Use ▼ to scroll down the menu and find ,Language'. Press OK to enter the language setting and confirm the preferred language by pressing OK.
3. To exit Menu, press ⚠️ (Emergency Record) to return to preview.

Set Date & Time

Please set the date and time before using the auto camcorder for the first time or after two weeks without use.

1. Press ▼ to enter Menu (M).
2. Use ▼ to scroll down the menu, find 'Date/Time' and confirm with OK. Press ▲ or ▼ to enter current date and time; press OK to confirm the setting.

Record Video

You can select the preferred video recording mode from the menu option 'Record Mode':

1. Automatic Record

You can enable ‘Automatic Record’ function in the menu to automatically start video recording once the camcorder connects to the power supply (or when the vehicle engine gets started). Recording will automatically stop when the engine is switched off or the charger is unplugged. To manually stop recording, press OK (●) button shortly.

Loop Recording:

The videos are recorded as 3 minutes per clip and saved on MicroSD card. When the MicroSD card is full, the oldest recordings on the card will be overwritten by new recordings.

2. Manual Record

When the 'Manual Record' function is enabled, you can start or stop recording by pressing OK (●) button shortly.

3. Motion Detection

1) When Motion Detection is enabled, the camcorder automatically stops recording when there's no detected movement for 60 seconds. If motion is detected in the scene, the camcorder automatically starts recording.
2) After Motion Detection is enabled, the LCD screen will be automatically turned off after 10 seconds. The LCD screen remains off when the camcorder detects motion and starts recording.
3) To turn on the LCD screen, press any button.

The screen will display the information about how many times the camcorder has detected movement. Press OK to return to the preview.

Motion Detection

Total 1 Times

4. Emergency Record ▲:

■ Bump Auto Record

When ‘Bump Auto Record’ (recommended) function is enabled, the car camcorder automatically saves current video clip (3 mins) in the folder ‘Emergency’ when an impact on the vehicle is detected. The videos are locked from deletion.

■ Manual Emergency Record

During a recording session, you can manually press the emergency record button ▲ to start emergency recording.

NOTICE!

1. Manual emergency record is not available when the camcorder is inactive. Press OK (●) to start recording instead.
2. During Bump Auto Record and Manual Emergency Record, a yellow symbol ⚠ will be displayed on the screen. Please wait until the symbol disappears on the screen to finish the emergency recording.
3. During emergency recording, press ▲, ▼, or OK button will stop the emergency recording.
4. Emergency recording saved under Emergency folder takes up to 30% of the memory capacity. When emergency recording reaches 30% maximum capacity, to avoid missing the latest emergency recording, the oldest emergency recording files will be replaced by new recording.
5. To avoid the oldest emergency recording to be overwritten, please make copy of the emergency recording files right after the event happened.

Recording Capacity at Full HD resolution:

Type	Memory Card Capacity	8 GB 16	GB 32 GB
General Record	70% Capacity 5,6 GB 11.2 GB 22.4 GB
	Max. recorded time (min.)	55 min 1h	50 min 3h	40 min
Emergency Record	30% Capacity 2.4 GB 4.8 GB 9.6 GB
	Max. recorded time (min.)	24 min 48	min 1h	36 min

Take Snapshot

During general video recording, you can press ▼ for 3 seconds to take a snapshot.

Change Settings in MENU

1. Press ▼ to enter Menu (M).
2. Use ▲ or ▼ to select a menu option and press OK to enter the selected menu and confirm preferred setting.
3. Press ⚠️ (Emergency Record) to exit the Menu.

Options in MENU

1. Record Mode

See Record Video on Page 6 - 8.

Option: Automatic Record / Manual Record / Motion Detection

2. Bump Auto Record

Set the G-sensor sensitivity level or disable the automatic emergency record in case of collision. It is highly recommended to turn on this function. Options: Low / Mid / High Sensitivity /Off

3. Video Resolution

Set the video resolution from below options:

■ HD 720p / 60 fps
■ HD 720p / 30 fps
■ WVGA / 30 fps
■ VGA / 30 fps

■ Full HD 1080p / 30 fps

4. Driving Safety

■ Traffic Sign Recognition (TSR)

Enable or disable the recognition of speed limit sign. When a speed limit sign is recognized, the speed limit will be displayed on the LCD screen and an audio alert is signaled.

Options: On / Off

NOTICE!

Traffic Sign Recognition (TSR) uses image recognition technology to identify speed limit sign catching by the image sensor. This function only works in daytime while the sign is in clear visibility for the camcorder. It's normal that some speed limit may not be recognized. Vehicle speed, rain, good weather but strong backlight condition, dirt, or faded color of the sign would affect the accuracy of recognition.

■ Stop & Go

Set alert to remind the driver to continue driving when the camcorder detects the movement of the front car., e.g., before the traffic light or in the traffic jam. It plays two bright tunes. Options: On /Off

■ Driver Fatigue Alarm

Set alarm to be reminded to take a break. The car camcorder plays a short tune and displays the sign 📋 on the screen.

Options: 30 min. /1 hr. /2 hr. /4 hr. /Off

Light Reminder

Set reminder to turn on the headlight when the camcorder detects the lack of daylight. The car camcorder plays two short tunes and displays the sign 📋 on the screen. Options: On / Off

WARNING!

The driving safety functions with alarm or warning signals, including any visual or audible reminding signals, should not replace your decision-making and judgment required for proper and safe operation of the vehicle.

5. Microphone

Enable to disable (mute) the audio during video recording.

6. Beep

Enable or disable toggle beep sound when you press a button.

7. Date Stamp

Set the information for displaying on video clips.

Options: On / Off

8. EV (Exposure Value)

Manually adjust the exposure to gain better effect when the preview image appears too bright or too dark.

9. Screen Saver

Set or disable screen timeout to turn off the display.

10. Video Frequency

Set flicker frequency to 50Hz or 60Hz based on local power supply.

Default is 50Hz for European countries.

11. TV Mode

Set the TV type when connecting the auto camcorder to a TV.

PAL: suitable for European and Middle East countries

NTSC: suitable for American and Asian countries

12. Format Memory Card

Format (Delete) all the files on the MicroSD card.

It is recommended to format the memory card after making a backup copy or at least 3 to 4 times per year.

WARNING!

Data including emergency recording is irrecoverable after formatting. Please make a backup copy of the videos and photos before formatting the card.

13. Default

Reset all the settings to factory default.

14. Version

Display the current firmware version used on the camcorder.

Playback / Delete / Protect Video

To playback video or photo files, first press ▲ (☐) to enter playlist. Press OK to select Emergency, Videos, or Photos. Use ▲ or ▼ to browse thumbnails and press OK to select the file.

1. Press OK again to start the playback.
2. Follow the instructions on screen, you can delete ( ), lock ( ), or unlock current file. A locked file is protected from deleting.
3. To return to playlist, press ⚠️ Emergency Record button.
4. To return to preview, press again ▲ Emergency Record button.

Connect to PC

You can connect the camcorder with a PC to playback files or copy files onto PC.

1. Connect the camcorder with PC by using the USB cable.
2. The camcorder will automatically turn on and switch to 'Removable drive' mode.
3. Open the removable drive under Computer: and copy the files onto your computer.

Emergency: Emergency video clips

VIDEOS: Loop recording video clips

PHOTOS: Photos

1. You can use an Apple QuickTime Player to playback the video clips from Mac or PC.

Reset the Car Camcorder

In the case that the camcorder does not react or can't be turned off, press the 'Reset' button on the rear side to restart the camcorder.

Specifications

Image Sensor 3.5 Mega-pixel (2304 x 1536) CMOS sensor, 1/3"
Video Resolution /Frame Rate/Aspect Ratio	FULL HD: 1920 x 1080, 30 fps, 16:9HD 720p: 1280 x 720, 60 fps, 16:9HD 720p: 1280 x 720, 30 fps, 16:9WVGA: 854 x 480, 30 fps, 16:9VGA: 640 x 480, 30 fps, 4:3
Snapshot Resolution 2 MP: 1920x1080, 16:9
File Format H.264 (*.mov), JPG
Internal Memory 128 MB, not available for storage
External Memory micro SDHC from 8 GB up to 32 GB (min. Class 6)
LCD Display 2.7" (6.9 cm) diagonal, 480 x 240 pixels
View Angle 130°
Aperture Range F2.4
Focus Range 250 cm ~∞
Microphone Yes (On, Off)
Internal Speaker Yes
White Balance Auto
Exposure Control -1 ~ +1
Bump Auto Record Yes (Off, High, Mid, Low Sensitivity)
Loop Recording Yes (3 min per video clip)
Automatic Recording	Yes (On, Off)
Emergency Recording	Yes (Bump Auto Record, manual)
Motion detection	Yes (On, Off)
Driver Fatigue Alarm	Yes (On, Off)
Light Reminder	Yes (on, Off)
Stop & Go	Yes (On, Off)
Traffic Sign Recognition (TSR)	Yes (On, Off)
Screen Saver Yes (1 Min / 3 Min /Off)
Interface	Mini USB 2.0 (Power/PC), AV-Out, Mini USB (GPS, optional, inactive), MicroSD card slot
Input Power Supply	DC: 12 V - 24 V, 1 A (cigar car charger)
Output Power Supply	DC: 5 V, 1 A
Operation Temperature	0 °C ~ 60 °C
Storage Temperature	-20 °C ~ 70 °C
Dimensions (LxWxH)	280 mm x 101 mm x 50 mm
Weight	290 g

Willkommen

Installation des Kfz-Camcorders

- GS 372