NEBL1 20402 V D AI - Fridge HOTPOINT - Free user manual and instructions
Find the device manual for free NEBL1 20402 V D AI HOTPOINT in PDF.
Download the instructions for your Fridge in PDF format for free! Find your manual NEBL1 20402 V D AI - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NEBL1 20402 V D AI by HOTPOINT.
USER MANUAL NEBL1 20402 V D AI HOTPOINT
Operating Instructions
REFRIGERATOR/FREEZER COMBINATION Contents Operating Instructions, 1 Assistance, 2 Description of the appliance, 7 Description of the appliance, 13 Reversible doors, 19 Installation, 25 Accessories,25 Start-up and use, 26 Maintenance and care, 26 Precautions and tips, 27 Troubleshooting, 28
Gebruiksaanwijzingen KOEL/DIEPVRIESCOMBINATIE Inhoud Gebruiksaanwijzingen, 1 Service, 3 Beschrijving van het apparaat, 9 Beschrijving van het apparaat, 15 Draairichting deuren verwisselbaar, 19 Installatie, 37 Toebehoren, 37 Starten en gebruik, 38 Onderhoud en verzorging, 38 Voorzorgsmaatregelen en advies, 39 Storingen en oplossingen,40
Communicating: • type of malfunction • appliance model (Mod.) • serial number (S/N) This information can be found on the data plate located on the bottom left side of the refrigerator compartment.
Non ricorrete mai a tecnici non autorizzati e rifiutate sempre líinstallazione di pezzi di ricambio non originali.
Never call on unauthorized technicians and always refuse spare parts which are not originals.
Prima di contattare líAssistenza: • Verificare se l’anomalia può essere risolta autonomamente (vedi Anomalie e Rimedi). • In caso negativo, contattare il Numero Unico Nazionale 199.199.199.
Before calling for Assistance: • Check if the malfunction can be solved on your own (see Troubleshooting). • If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre
1 FREEZER OPERATION Button to regulate the temperature the freezer compartment. Button is used with QUICK FREEZE Button to switch on/switch off the product by pressing both 3 seconds 2 QUICK FREEZE Button (rapid freezing) to freeze fresh food. The Quick Freeze function makes it possible to freeze food much more quickly. In this way the water inside the food turns into micro ice crystals, the nutritional properties of both cooked and fresh food remaining unchanged. Once the freezing process is complete, the temperature goes back to the set level.We recommend introducing the food inside the freezer compartment only when the function is over. The function lasts no more than 24 hours. 3 QUICK FREEZE Blue light illuminates when QUICK FREEZE button is pressed. 4 FREEZER TEMPERATURE Yellow light The temperature of the Freezer is consisted with 4 levels as indicated on serigraphy 5 FRIDGE TEMPERATURE Yellow light The temperature of the Fridge is consisted with 4 levels as indicated on serigraphy 6 GOOD NIGHT Blue light illuminates when GOOD NIGHT button is pressed. 7 GOOD NIGHT function makes it possible to minimize any noise, at the same time ensuring suitable storage performance.The compressor will be working at the minimum speed that can be set.When you start the function, the display enters into standby mode and the relevant Good Night icon lights up.The Good Night function can automatically stop either after maximum 6 hours or after the performance of the product with the function ON can no longer be ensured owing to a number of different reasons. To stop the function manually press the button again or switch off the device - we recommend starting the function in the night hours or minimizing any interaction with the fridge to prevent the function from stopping automatically. 8 REFRIGERATOR OPERATION button to regulate the temperature of the refrigerator compartment.
!The indicator lights are also used to indicate an unusual temperature increase in the freezer compartment (see Troubleshooting).
Description of the appliance
The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages.
1 Levelling FEET 2 STORAGE compartment*. 3 FREEZER and STORAGE compartment *. 4 FRUIT and VEGETABLE bin 5 Food Care Zone / “Food Care Zone 0°C” / Safe Defrost* 6 SHELVES*. 7 WINE RACK*. 8 AIR* 9 LAMP (see Maintenance). 10 Removable multipurpose SHELVES*. 11 BOTTLE shelf
* Varies by number and/or position, available only on certain
If it is necessary to change the direction in which the doors open, please contact the Technical Assistance Centre.
Nel frigorifero gli alimenti si gelano. • La temperatura non è regolata correttamente (vedi descrizione) • Gli alimenti sono in prossimità dei fori di aerazione Il motore funziona di continuo. • Il pulsante QUICK FREEZE (congelamento rapido) è premuto: la spia blu QUICK FREEZER è accesa o lampeggia (Vedi Descrizione) • La porta non è ben chiusa o viene aperta di continuo. • La temperatura dell’ambiente esterno è molto alta. L’apparecchio emette molto rumore. • L’apparecchio non è stato installato ben in piano (vedi Installazione). • L’apparecchio è stato installato tra mobili o oggetti che vibrano ed emettono rumori. • Il gas refrigerante interno produce un leggero rumore anche quando il compressore è fermo: non è un difetto, è normale.
Installation ! Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. ! Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.
1. Insert the plug into the socket and switch on the product using the appropriate button, ensure that yellow refrigerator and freezer temperature lights illuminates 2. After a few hours you will be able to put food in the refrigerator. 3. Press the QUICK FREEZEbutton (rapid freezing): the QUICK FREEZE indicator light will illuminate. Once the refrigerator has reached the optimal temperature, the indicator light goes out and you can begin food storage.
Positioning and connection
Using the refrigerator to its full potential
Positioning 1. Place the appliance in a well-ventilated humidity-free room. 2. Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy. 3. Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls. 4. Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.). 5. In order to maintain the correct distance between the appliance and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided. Levelling 1. Install the appliance on a level and rigid floor. 2. If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet. Electrical connections After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following: • The appliance is earthed and the plug is compliant with the law. • The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W). • The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220240V). • The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets. ! Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. ! The cable must not be bent or compressed. ! The cable must be checked regularly and replaced by authorised technicians only (see Assistance). ! The manufacturer declines any liability should these safety measures not be observed.
• Adjust the temperature using the display. • Activate the QUICK FREEZE function to lower the temperature quickly, for example, when you place a large number of new food items inside a fridge and the internal temperature rises slightly. This function quickly cools the groceries by temporarily reducing the temperature until it reaches the ideal level. • Place only cold or lukewarm foods in the compartment, never hot foods (see Precautions and tips). • Remember that cooked foods do not last longer than raw foods. • Do not store liquids in open containers: they will increase the level of humidity in the refrigerator and cause condensation to form. SHELVES: with or without grill. Due to the special guides the shelves are removable and the height is adjustable , allowing easy storage of large containers and food. Height can be adjusted without complete removal of the shelf. TEMPERATURE Indicator light*: to identify the coldest area in the refrigerator. 1. Check that OK appears clearly on the indicator light (see diagram).
2. If the word “OK” does not appear it means that the temperature is too high: set a lower temperature and wait approximately 10 hours until the temperature has been stabilised. 3. Check the indicator light again: if necessary, readjust it following the initial process. If large quantities of food have been added or if the refrigerator door has been opened frequently, it is normal for the indicator not to show OK. Wait at least 10h before you set the FRIDGE WORKING temperature on a lower position.
It is recognizable due to the presence of the mechanism on the top part of the refrigerator compartment (see diagram).
Start-up and use Starting the appliance
! Before starting the appliance, follow the installation instructions (see Installation). ! Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate. ! The appliance comes with a motor protection control system which makes the compressor start approximately 8 minutes after being switched on. The compressor also starts each time the power supply is cut off whether voluntarily or involuntarily (blackout).
B A AIR maximises air circulation, improving the efficiency of the evaporator and helping to achieve the optimal temperature inside the refrigerator as quickly as possible each time it has been
opened. The blown air (A) is cooled when it comes into contact with the cold wall, whereas the hotter air (B) is sucked up (see diagram). Food Care Zone * Area dedicated to the storage of fresh food, such as meat and fish. Thanks to the low temperature inside the compartment, the Food Care Zone extends the period of time for which the food can be stored, keeping it fresh for up to a week. “Food Care Zone 0°C” / Safe Defrost* : In the “Food Care Zone 0°C” compartment there are lower temperatures than in the fridge. Temperatures can go below 0°C. This compartment is the ideal spot to store meat and fish. You can also store milk, dairy products, fresh pasta, cooked food or leftovers. This compartment is also suitable to defrost foods in a healthy way, because the defrosting process at low temperatures inhibits the micro organisms proliferation. This compartment is not suitable for vegetables, salad and salads. The 0°C can be obtained in normal conditions and when the fridge compartment is set to 4° and the freezer is set to -18° C. When you decrease the fridge temperature you also decrease the temperature of the “Food Care Zone 0°C” ”compartment.
Using the freezer to its full potential
• Adjust the temperature using the display. • Do not re-freeze food that is defrosting or that has already been defrosted. These foods must be cooked and eaten (within 24 hours). • Fresh food that needs to be frozen must not come into contact with food that has already been defrosted. Fresh food must be stored in the top FREEZER and STORAGE compartment where the temperature drops below -18°C and guarantees rapid freezing. • To freeze fresh food in the best and safest way possible, activate the QUICK FREEZE function 24 hours before placing the food in the freezer. After placing the food inside, activate the QUICK FREEZE function again; it will be deactivated automatically after 24 hours; • Do not place glass bottles which contain liquids, and which are corked or hermetically sealed in the freezer because they could break. • The maximum quantity of food that may be frozen daily is indicated on the plate containing the technical properties located on the bottom left side of the refrigerator compartment (for example: Kg/24h: 4). • In order to obtain a greater amount of space in the freezer compartment, you may remove the bins (except the lowest bin , the uppermost bin and the special COOL CARE ZONE bin, which has an adjustable temperature) and place the food directly onto the evaporator plates. ! If the room temperature drops below 14°C for an extended period of time, the ideal temperature will not be reached in the freezer compartment and food preservation will be reduced. ! Do not open the door during freezing. ! If there is a power cut or malfunction, do not open the freezer door. This will help maintain the temperature inside the freezer, ensuring that foods are conserved for at least 9 -14 hours. Easy Ice * The double tub was designed to optimise space in the freezer compartment and to ensure that ice is always readily available. The trays can be stacked or filled and used separately. Furthermore, the special fastening system makes Easy Ice an extremely flexible solution, as it can be positioned in the right or left part of the top drawers.
Maintenance and care Switching the appliance off
During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: 1. press the FREEZER OPERATION Button and QUICK FREEZE Button for 3 seconds to switch off the product 2. pull the plug out of the socket ! If this procedure is not followed, the alarm may sound. This alarm does not indicate a malfunction. To restore normal operation insert the plug into the socket, press the FREEZER OPERATION and QUICK FREEZE button and set the FREEZER OPERATION button on the desired value.To disconnect the appliance, follow point 1 and 2.
The I Care function can be activated to optimise energy consumption while maintaining the cooling performance of the product.This function maximises the amount of energy saved. Under these conditions, the display remains off even when the door is opened. The function is activated by pressing and holding the QUICK FREEZE and FRZ (+) buttons simultaneously for at least 6 seconds. Once the function has been activated, all LEDs will light up for 2 seconds to confirm activation, and the temperature setting of +5, -18 will appear on the display. The display switches off after 5 seconds. To change the temperature, simply press the + and – buttons until you have reached the desired temperature. However, the I Care function can also be disabled by switching the product off using the ON/OFF button. When it is switched back on, the I Care will be disabled.In humid environments, when the I Care function is enabled, slight condensation may form on the appliance door; normal operating conditions are restored when the function is disabled.
Cleaning the appliance
• The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. Do not use solvents, abrasive products, vinegar , bleach or ammonia. • The removable accessories may be soaked in warm water and soap or dishwashing liquid. Rinse and dry them carefully. • The back of the appliance may collect dust which can be removed by delicately using the hose of a vacuum cleaner set on medium power. The appliance must be switched off and the plug must be pulled out before cleaning the appliance.
Avoiding mould and unpleasant odours
• The appliance is manufactured with hygienic materials which are odour free. In order to maintain an odour free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly. • If you want to switch the appliance off for an extended period of time, clean the inside and leave the doors open.
* Varies by number and/or position, available only on certain models.
Defrosting the appliance
! Follow the instructions below. Do not speed up the defrosting process by using any devices or tools other than the scraper provided, you may damage the refrigeration circuit. Defrosting the refrigerator compartment The refrigerator has an automatic defrosting function: water is ducted to the back of the appliance by a special discharge outlet (see diagram) where the heat produced by the compressor causes it to evaporate. It is necessary to clean the discharge hole regularly so that the water can flow out easily.
Replacing the light bulb *
To replace the light bulb in the refrigerator compartment, pull out the plug from the electrical socket. Follow the instructions below. Access the light bulb by removing the cover as indicated in the diagram. Replace it with a similar light bulb within the power range indicated on the cover.
Precautions and tips ! The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully.
Defrosting the freezer compartment If the frost layer is greater than 5 mm, it is necessary to defrost manually: 1. Press the ON/ OFF button to switch off the appliance. 2. Wrap frozen foods in newspaper and place them in another freezer or in a cool place. 3. Leave the door open until the frost has melted completely. This can be made easier by placing containers with lukewarm water in the freezer compartment. 4. Clean and dry the freezer compartment carefully before switching the appliance on again. 5. Certain appliances are fitted with the DRAIN SYSTEM to lead the water outside: let the water flow into a container (see diagram).
6. Wait for approximately 2 hours, i.e. until the ideal storage conditions have been restored, before placing food in the freezer compartment. Dual led * Thanks to the powerful light it emits, the new dual LED lighting system offers a clear view of all foods, with no shadowy areas. If the LEDs need to be replaced, please contact the Technical Assistance Service.
This appliance complies with the following Community Directives: - 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments; -89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent amendments; - 2002/96/CE.
• The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use. • The appliance must be used to store and freeze food products by adults only and according to the instructions in this manual. • The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the appliance exposed to rain and storms. • Do not touch the appliance with bare feet or with wet or moist hands and feet. • Do not touch the internal cooling elements: this could cause skin abrasions or frost/freezer burns. • When unplugging the appliance always pull the plug from the mains socket, do not pull on the cable. • Before cleaning and maintenance, always switch off the appliance and disconnect it from the electrical supply. It is not sufficient to set the temperature adjustment knobs on ON/OFF (appliance off) to eliminate all electrical contact. • In the case of a malfunction, under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance. • Do not use any sharp or pointed utensils or electrical equipment - other than the type recommended by the manufacturer - inside the frozen food storage compartments. • Do not put ice cubes taken directly from the freezer into your mouth. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. • Keep packaging material out of the reach of children! It can
* Varies by number and/or position, available only on certain models.
become a choking or suffocation hazard.
level. The food must be disposed immediately.
• Observe local environmental standards when disposing packaging material for recycling purposes. • The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.
Respecting and conserving the environment
• Install the appliance in a fresh and well-ventilated room. Ensure that it is protected from direct sunlight and do not place it near heat sources. • Try to avoid keeping the door open for long periods or opening the door too frequently in order to conserve energy. • Do not fill the appliance with too much food: cold air must circulate freely for food to be preserved properly. If circulation is impeded, the compressor will work continuously. • Do not place hot food directly into the refrigerator. The internal temperature will increase and force the compressor to work harder and will consume more energy. • Defrost the appliance if ice forms (see Maintenance). A thick layer of ice makes cold transference to food products more difficult and results in increased energy consumption.
Troubleshooting If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list. Any indicator lights do not illuminate. • If the function I Care is not active (see section), the plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house. The motor does not start. • The appliance comes with a motor protection control (see Start-up and use). The indicator lights are on but the light is dim. • Pull out and reverse the plug before putting it back in the socket. a) The alarm sounds. • The refrigerator door has remained open for more than two minutes (the buzzer will stop sounding when you shut the door) or the correct switching-off procedure was not followed (see Maintenance). b) The alarm sounds and the two blue indicator lights flash. • The temperature in the freezer is too high. Check the quality of the food products and dispose if necessary.
+ buzzer = Heating is excessive c) The alarm sounds and the two yellow indicator and blue one lights flash. • The temperature in the freezer has reached a dangerous
+ buzzer = Heating danger -b/c) In both these cases the freezer will maintain a temperature of about 0°C so that the food does not re-freeze. To turn off the acoustic signal open and close the refrigerator door. restore normal operation product should be switched off and switched on by buttons from control panel (See the description) The refrigerator and the freezer do not cool well. • The doors do not close properly or the seals are damaged. • The doors are opened too frequently. • The refrigerator or the freezer have been over-filled. The food inside the refrigerator is beginning to freeze. • The temperature is not adjusted properly (see description) • The food is near the back inside wall of the refrigerator. The motor runs continuously. • The QUICK FREEZE button has been pressed (rapid freezing): the blue QUICK FREEZE light is on (see Description). • The door is not closed properly or is continuously opened. • The outside ambient temperature is very high. The appliance makes a lot of noise. • The appliance has not been installed on a level surface (see Installation). • The appliance has been installed between cabinets that vibrate and make noise. • The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal.
ManualGo.com