Essentio CM6340 - Desktop computer ASUS - Free user manual and instructions

Product type	Desktop computer
Brand	ASUS
Model	Essentio CM6340
Dimensions (L x H x D)	approx. 40 x 40 x 20 cm
Weight	approx. 8 kg
Processor	Intel Core i5 or i7 (depending on configuration)
RAM	8 GB DDR3 (expandable)
Hard drive	1 TB SATA 7200 RPM
Power supply	300 W
Operating system	Windows 10 Home
Connectivity	Wi-Fi 802.11 b/g/n, Gigabit Ethernet, Bluetooth 4.0
Front ports	2x USB 3.0, 1x USB 2.0, microphone/headphone jack
Rear ports	2x USB 3.0, 2x USB 2.0, HDMI, VGA, 3x audio jack, RJ45
Main features	Office work, internet browsing, multimedia, casual gaming
Maintenance and cleaning	Turn off and unplug before cleaning. Use a soft dry cloth. Avoid liquids.
Safety	Do not open the system unit without unplugging. Keep out of reach of children.
Spare parts and repairability	RAM, hard drive, power supply, motherboard available on the market. See manual for procedure.
General information	ASUS Essentio CM6340 desktop computer. Consult the manual for full details.

Frequently Asked Questions - Essentio CM6340 ASUS

How to reset the computer to factory settings?

Go to Settings > Update & Security > Recovery. Select Reset this PC and follow the instructions. Back up your data beforehand.

How to update the graphics card drivers?

Go to the ASUS website, support section, download the latest drivers for the Essentio CM6340 model. Install them following the wizard.

What to do if the computer does not turn on?

Check that the power cable is properly plugged in and that the outlet works. Try another cable. If nothing happens, contact ASUS support.

How to connect the computer to an external monitor?

Use an HDMI or VGA cable depending on available ports. Connect the cable to both the computer and the monitor. Select the correct source on the monitor.

Can I add more RAM?

Yes, the computer has DDR3 memory slots. Open the case, insert compatible sticks (max 16 GB). Consult the manual for details.

How to clean the inside of the computer?

Turn off and unplug the computer. Use a can of compressed air to remove dust. Do not touch internal components with your fingers.

What to do in case of overheating?

Make sure the fans are working and the air vents are not blocked. Clean the dust. If the problem persists, replace the processor's thermal paste.

How to fix the 'Bootmgr is missing' error?

Insert the Windows recovery disc or an installation DVD. Boot from it, select Repair your computer, then Startup Repair.

How to replace the hard drive?

Turn off the computer, unplug all cables. Open the case, disconnect the old drive, install the new one in the same slot. Screw it in and reconnect. Reinstall the operating system.

Where to find the user manual?

The manual is available for free download on notice-facile.com and on the ASUS website. Search for the Essentio CM6340 model in the support section.

USER MANUAL Essentio CM6340 ASUS

3D rendering of a black desktop computer tower with visible branding (no text or symbols on the main body)

E7503

First Edition

June 2012

Copyright © 2012 ASUSTeK Computer Inc. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. ("ASUS").

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe.

Contents

Notices 5

Safety information 10

Conventions used in this guide ....11

Where to find more information ....11

Package contents 12

Chapter 1: Getting started

Welcome! 13

Getting to know your computer.... 13

Setting up your computer.... 16

Turning your computer ON/OFF 19

Chapter 2: Using Windows ^® 7

Starting for the first time.... 21

Using Windows ^® 7 desktop 22

Managing your files and folders.... 24

Restoring your system settings.... 26

Protecting your computer.... 27

Getting Windows® Help and Support 28

Chapter 3: Connecting devices to your computer

Connecting a USB storage device.... 29

Connecting microphone and speakers 30

Connecting multiple external displays 33

Connecting an HDTV 35

Chapter 4: Using your computer

Proper posture when using your Desktop PC.... 37

Using the memory card reader 38

Using the optical drive 39

Using the multimedia keyboard (on selected models only) 40

Chapter 5: Connecting to the Internet

Wired connection 43

Wireless connection (on selected models only) 45

Contents

Chapter 6: Using the utilities

ASUS AI Suite II 47

ASUS AI Manager 53

Ai Charger 55

ASUS Webstorage.... 56

ASUS Easy Update 58

ASUS Instant On 59

Nero 9 60

Recovering your system....61

Chapter 7: Troubleshooting

Troubleshooting 63

ASUS contact information....70

Notices

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

Federal Communications Commission Statement

This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The use of a shielded-type power cord is required in order to meet FCC emission limits and to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

(Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the Federal Register, National Archives and Records Administration, U.S. Government Printing Office.)

FCC Radio Frequency (RF) Exposure Caution Statement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. "The manufacture declares that this device is limited to Channels 1 through 11 in the 2.4GHz frequency by specified firmware controlled in the USA."

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance.

IC Radiation Exposure Statement for Canada

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with IC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance.

Operation is subject to the following two conditions:

• This device may not cause interference and
- This device must accept any interference, including interference that may cause undesired operation of the device.

To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems) this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

Wireless Operation Channel for Different Domains

N. America 2.412-2.462 GHz Ch01 through CH11

Japan 2.412-2.484 GHz Ch01 through Ch14

Europe ETSI 2.412-2.472 GHz Ch01 through Ch13

CE Mark Warning

CE

CE marking for devices without wireless LAN/Bluetooth

The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC "Low voltage directive".

CE!

CE marking for devices with wireless LAN/Bluetooth

This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity.

This equipment may be operated in all members of the EU. Some areas of France have a restricted frequency band. This equipment may be used indoor only.

低功率射頻電機設備警語

依據低功率電波輻射性電機管理辦法

第十二條

VCCI Class B Statement

情報処理装置等電波障害自主規制について

KC: Korea Warning Statement

B급 기기 (가정용 방송통신기자재)

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Lithium-Ion Battery Warning

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.

Safety information

Disconnect the AC power and peripherals before cleaning. Wipe the Desktop PC using a clean cellulose sponge or chamois cloth dampened with solution of nonabrasive detergent and a few drops of warm water then remove any extra moisture with a dry cloth.

• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
  • DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak.
• DO NOT place or drop objects on top and do not shove any foreign objects into the Desktop PC.
• DO NOT expose to strong magnetic or electrical fields.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
• Battery safety warning: DO NOT throw the battery in fire. DO NOT short circuit the contacts. DO NOT disassemble the battery.
• Use this product in environments with ambient temperatures between 0^ (32°F) and 35^ (95°F).
• DO NOT cover the vents on the Desktop PC to prevent the system from getting overheated.
• DO NOT use damaged power cords, accessories, or other peripherals.
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
• Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.

CAUTION: Information to prevent damage to the components when trying to complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a ask.

Where to find more information

Refer to the following sources for additional information and for product and software updates.

ASUS websites

The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS website www.asus.com.

ASUS Local Technical Support

Visit ASUS website at http://support.asus.com/contact for the contact information of local Technical Support Engineer.

Package.contents

ASUS Essentio Desktop PC	Keyboard x1 Mouse x1
Power cord x1 Installation Guide x1 Warranty card x1
Nero 9 burning software DVD x1	Support DVD (optional) x1 Recovery DVD (optional) x1	Antenna (optional) x1

• If any of the above items is damaged or missing, contact your retailer.
• The illustrated items above are for reference only. Actual product specifications may vary with different models.

Chapter 1

Getting started

Welcome!

Thank you for purchasing the ASUS Essentio CM6340 Desktop PC!

The ASUS Essentio CM6340 Desktop PC provides cutting-edge performance,

uncompromised reliability, and user-centric utilities. All these values are encapsulated in a stunningly futuristic and stylish system casing.

Read the ASUS Warranty Card before setting up your ASUS Desktop PC.

Getting to know your computer

Illustrations are for reference only. The ports and their locations, and the chassis color vary with different models.

Front panel

1. USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0 devices such as a mouse, printer, scanner, camera, PDA, and others.
2. Microphone port. Microphone port. This port connects to a microphone.
3. Headphone port. This port connects to a headphone or speaker.
4. Power button. Press this button to turn on your computer.
5. Optical disk drive eject button. Press this button to eject the optical disk drive tray.
6. Optical disk drive bay. There is an optical disk drive in this bay.
7. MultiMediaCard(MMC) / xD-Picture (XD) / Secure Digital™ (SD) / High Capacity Secure Digital™(SDHC) / Memory Stick Pro™(MS/PRO) card slot. Insert a supported memory card into this slot.

Rear panel

1. Power connector. Plug the power cord to this connector.
2. Voltage selector switch. Switch to select the appropriate system input voltage.
3. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
4. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content.

5. DVI-D port. This port is for any DVI-D compatible device and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content.

6. USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0 devices such as a mouse, printer, scanner, camera, PDA, and others.

7. USB 3.0 ports. These Universal Serial Bus 3.0 (USB 3.0) ports connect to USB 3.0 devices such as a mouse, printer, scanner, camera, PDA, and others.

• DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows® operating system.
• Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows ^ OS environment and after the USB 3.0 driver installation.
• USB 3.0 devices can only be used as data storage only.

• We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices.

• Line In port (light blue). This port connects to a tape, CD, DVD player, or other audio sources.

• Line Out port (lime). This port connects to a headphone or speaker. In a 4, 6, or 8-channel configuration, the function of this port becomes Front Speaker Out.
• Microphone port (pink). This port connects to a microphone.

Refer to the audio configuration table below for the function of the audio ports in a 2, 4, 6, or 8-channel configuration.

Audio 2, 4, 6, or 8-channel configuration

Port 2-channel 4-channel 6-channel 8-channel
Light Blue (Rear panel) Line In Rear Speaker Out Rear Speaker Out
Lime (Rear panel)	Line Out	Front Speaker Out	Front Speaker Out	Front Speaker Out
Pink (Rear panel)	Mic In	Mic In	Bass/Center	Bass/Center
Lime (Front panel)	-	-	-	Side Speaker Out

1. Expansion slot brackets. Remove the expansion slot bracket when installing an expansion card.
2. ASUS WLAN Card (on selected models only). This optional WLAN card allows your computer to connect to a wireless network.
3. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub.

LAN port LED indications

Activity/Link LED		Speed LED
Status	Description	Status	Description
OFF	No link	OFF	10Mbps connection
ORANGE	Linked	ORANGE	100Mbps connection
BLINKING	Data activity	GREEN	1Gbps connection

ACT/LINK SPEED LED LED

LAN port

1. VGA port.VGA port. This port is for VGA-compatible devices such as a VGA monitor.
2. PS/2 mouse port (green). This port is for a PS/2 mouse.
3. Air vents. Air vents. These vents allow air ventilation.

DO NOT block the air vents on the chassis. Always provide proper ventilation for your computer.

Setting up your computer

This section guides you through connecting the main hardware devices, such as the external monitor, keyboard, mouse, and power cord, to your computer.

Connecting an external monitor

Using the onboard display output ports

Connect your monitor to the onboard display output port.

To connect an external monitor using the onboard display output ports:

1. Connect a VGA monitor to the VGA port, or a DVI-D monitor to the DVI-D port, or an HDMI monitor to the HDMI port on the rear panel of your computer.
2. Plug the monitor to a power source.

Diagram showing connection between a computer monitor and a server rack with connected cables, highlighting internal components (no text or symbols present)

• If your computer comes with an ASUS Graphics Card, the graphics card is set as the primary display device in the BIOS. Hence, connect your monitor to a display output port on the graphics card.
• To connect multiple external monitors to your computer, refer to Connecting multiple external monitors in Chapter 3 of this user manual for details.

Connecting a USB keyboard and a USB mouse

Connect a USB keyboard and a USB mouse to the USB ports on the rear panel of your computer.

Diagram showing a computer tower connected to a keyboard via cable, with an inset close-up of the internal components (no text or symbols visible)

Connecting the power cord

Connect one end of the power cord to the power connector on the rear panel of your computer and the other end to a power source.

Diagram showing computer hardware components connected to a rack-mounted device, with an inset close-up of the internal socket (no text or symbols visible)

Turning your computer ON/OFF

This section describes how to turn on/off your computer after setting up your computer.

Turning your computer ON

To turn your computer ON:

1. Turn your monitor ON.
2. Press the power button on your computer.

1. Wait until the operating system loads automatically.

Turning your computer OFF

To turn your computer OFF:

1. Close all running applications.
2. Click on the Windows ^ desktop.
3. Click to shut down the operating system.

Chapter 2

Using Windows® 7

Starting for the first time

When you start your computer for the first time, a series of screens appear to guide you in configuring the basic settings of your Windows ^® 7 operating system.

To start for the first time:

1. Turn your computer on. Wait for a few minutes until the Set Up Windows screen appears.
2. From dropdown list, select your language, then click Next.
3. From the dropdown lists, select your Country or region, Time and currency, and Keyboard layout, then click Next.
4. Key in unique names for the user name and computer name, then click Next.
5. Key in the necessary information to set up your password, then click Next. You may also click Next to skip this step without entering any information.

If you want to set up a password for your account later, refer to the section Setting up a user account and password in this chapter.

1. Carefully read the license terms. Tick I accept the license terms and click Next.
2. Select Use recommended settings or Install important updates only to set up the security settings for your computer. To skip this step, select Ask me later.
3. Review your date and time settings. Click Next. The system loads the new settings and restarts. You may now start using your computer.

Using Windows ^® 7 desktop

Click the Start icon > Help and Support to obtain more information about Windows

^③ 7.

Using the Start menu

The Start menu gives you access to programs, utilities, and other useful items on your computer. It also provides you with more information about Windows 7 through its Help and Support feature.

Launching items from the Start menu

To launch items from the Start menu:

1. From the Windows ^ taskbar, click the Start icon

1. From the Start menu, select the item that you want to launch.

You may pin programs that you want constantly displayed on the Start menu. For more details, refer to the section Pinning programs on the Start menu or taskbar on this chapter.

Using the Getting Started item

The Getting Started item on the Start menu contains information about some basic tasks such as personalizing Windows ^® , adding new users, and transferring files to help you to familiarize yourself with using Windows ^® 7.

To use the Getting Started item:

1. From the Windows ^ taskbar, click the Start icon to launch the Start menu.
2. Select Getting Started. The list of available tasks appears.
3. Select the task that you want to do.

Using the taskbar

The taskbar allows you to launch and manage programs or items installed on your computer.

Launching a program from the taskbar

To launch a program from the taskbar:

- From the Windows program. ^® taskbar, click an icon to launch it. Click the icon again to hide the

You may pin programs that you want constantly displayed on the taskbar. For more details, refer to the section Pinning programs on the Start menu or taskbar on this chapter.

Pinning items on the jumplists

When you right-click an icon on the taskbar, a jumplist launches to provide you with quick-access to the program's or item's related links. You may pin items on the jumplist such as favorite websites, often-visited folders or drives, or recently played media files.

To pin items to the jumplist:

1. From the taskbar, right-click an icon.
2. From the jumplist, right-click the item that you want to pin, then select Pin to this list.

Unpinning items from the jumplist

To unpin items from the jumplist:

1. From the taskbar, right-click an icon.
2. From the jumplist, right-click the item that you want to remove from the jumplist, then select Unpin from this list.

Pinning programs on the Start menu or taskbar

To pin programs on the Start menu or taskbar:

1. From the Windows ^ taskbar, click the Start icon to launch the Start menu.
2. Right-click the item that you want to pin on the Start menu or taskbar.
3. Select Pin to Taskbar or Pin to Start menu.

You may also right-click on the icon of a running program on the taskbar, then select Pin this program to taskbar.

Unpinning programs from the Start menu

To unpin programs from the Start menu:

1. From the Windows ^ taskbar, click the Start icon to launch the Start menu.
2. From the Start menu, right-click the program that you want to unpin, then select Remove from this list.

Unpinning programs from the taskbar

To unpin programs from the taskbar:

1. From the taskbar, right-click the program that you want to remove from the taskbar, then select Unpin this program from taskbar.

Using the notification area

By default, the notification area shows these three icons:

	Action Center notificationClick this icon to display all the alert messages/notifications and launch the Windows®Action Center.
	Network connectionThis icon displays the connection status and signal strength of the wired or wireless network connection.
	VolumeClick this icon to adjust the volume.

Displaying an alert notification

To display an alert notification:

- Click the Notification icon, then click the message to open it.

For more details, refer to the section Using Windows® Action Center in this chapter.

Customizing icons and notifications

You may choose to display or hide the icons and notifications on the taskbar or on the notification area.

To customize icons and notifications:

1. From the notification area, click on the arrow icon .

1. Click Customize.

2. From the dropdown list, select the behaviors for the icons or items that you want to customize.

Managing your files and folders

Using Windows® Explorer

Windows® Explorer allows you to view, manage, and organize your files and folders.

Launching Windows® Explorer

To launch Windows Explorer:

1. From the Windows ^ taskbar, click the Start icon to launch the Start menu.

2. Click Computer to launch Windows Explorer.

Exploring files and folders

To explore files and folders:

1. Launch Windows ^® Explorer.
2. From the navigation or view pane, browse for the location of your data.
3. From the breadcrumb bar, click the arrow to display the contents of the drive or folder.

Customizing the file/folder view

To customize the file/folder view:

1. Launch Windows Explorer.

2. From the navigation pane, select the location of your data.

3. From the toolbar, click the View icon .

1. From the View menu, move the slider to select how you want to view the file/folder.

You may also right-click anywhere on the View pane, click View, and select the view type that you want.

Arranging your files

To arrange your files:

1. Launch Windows Explorer.
2. From the Arrange by field, click to display the dropdown list.
3. Select your preferred arrangement type.

Sorting your files

To sort your files:

1. Launch Windows Explorer.
2. Right-click anywhere on the View pane.
3. From the menu that appears, select Sort by, then select your preferred sorting type.

Grouping your files

To group your files:

1. Launch Windows Explorer.
2. Right-click anywhere on the View pane.
3. From the menu that appears, select Group by, then select your preferred grouping type.

Adding a new folder

To add a new folder:

1. Launch Windows Explorer.
2. From the toolbar, click New folder.
3. Key in a name for the new folder.

You may also right-click anywhere on the View pane, click New > Folder.

Backing up your files

Setting up a backup

To set up a backup:

1. Click > All Programs > Maintenance > Backup and Restore.
2. Click Set up backup. Click Next.
3. Select your backup destination. Click Next.
4. Select Let Windows choose (recommended) or Let me choose as your backup mode.

If you select Let Windows choose, Windows will not back up your programs, FAT-formatted files, Recycle Bin files, or temporary files that are 1GB or more.

1. Follow the onscreen instructions to finish the process.

Restoring your system settings

The Windows® System Restore feature creates a restore point where the computer's system settings are stored at certain time and date. It allows you to restore or undo changes to your computer's system settings without affecting your personal data.

To restore your system:

1. Close all running applications.
2. Click > All Programs > Accessories > System Tools > System Restore.
3. Follow the onscreen instructions to complete the process.

Protecting your computer

Using Windows ^® 7 Action Center

Windows® 7 Action Center provides you with alert notifications, security information, system maintenance information, and the option to automatically troubleshoot and fix some common computer problems.

You may customize the notifications. For more details, refer to the previous section Customizing icons and notifications in this chapter.

Launching Windows ^® 7 Action Center

To launch Windows® 7 Action Center:

1. To launch Windows 7 Action Center, click the Notification icon 📋, then click Open Action Center.
2. From Windows 7 Action Center, click the task that you want to do.

Using Windows® Update

Windows Update allows you to check and install the latest updates to enhance the security and performance of your computer.

Launching Windows® Update

To launch Windows® Update:

1. From the Windows ^ taskbar, click the Start icon to launch the Start menu.
2. Select All Programs > Windows Update.
3. From the Windows Update screen, click the task that you want to do.

Setting up a user account and password

You may create user accounts and passwords for people who will use your computer.

Setting up a user account

To set up a user account:

1. From the Windows ^ taskbar, click >Getting Started >Add new users.
2. Select Manage another account.
3. Select Create a new account.
4. Key in the name of the new user.
5. Select either Standard user or Administrator as the user type.
6. When done, click Create Account.

Setting up a user's password

To set up a user's password:

1. Select the user that you would like to set a password.
2. Select Create a password.
3. Key in a password and confirm it. Key in your password's hint.
4. When done, click Create password.

Activating the anti-virus software

Trend Micro Internet Security is pre-installed on your computer. It is a third-party anti-virus software protecting your computer from virus. It is purchased separately. You have a 30-day trial period after activating it.

To activate Trend Micro Internet Security:

1. Run the Trend Micro Internet Security application.
2. Carefully read the license terms. Click Agree & Activate.
3. Input your e-mail address and select your location. Click Next.
4. Click Finish to complete the activation.

Getting Windows® Help and Support

Windows® Help and Support provides you with guides and answers in using the applications in Windows® 7 platform.

To launch Windows® Help and Support, click > Help and Support.

Ensure that you are connected to the Internet to obtain the latest Windows ^® online help.

Chapter 3

Connecting devices to your computer

Connecting a USB storage device

This desktop PC provides USB 2.0/1.1 ports on both the front and rear panels and USB3.0 ports on the rear panel. The USB ports allow you to connect USB devices such as storage devices.

To connect a USB storage device:

- Insert the USB storage device to your computer.

To remove a USB storage device:

1. Click from the Windows notification area on your computer, then click Eject USB2.0 FlashDisk.
2. When the Safe to Remove Hardware message pops up, remove the USB storage device from your computer.

DO NOT remove a USB storage device when data transfer is in progress. Doing so may cause data loss or damage the USB storage device.

Connecting microphone and speakers

This desktop PC comes with microphone ports and speaker ports on both the front and rear panels. The audio I/O ports located on the rear panel allow you to connect 2-channel, 4-channel, 6-channel, and 8-channel stereo speakers.

Connecting Headphone and Mic

Illustration of a computer tower connected to an earphone, with a magnified inset showing cable routing (no text or symbols visible)

Connecting 2-channel Speakers

Connecting 4-channel Speakers

Connecting 6-channel Speakers

Connecting 8-channel Speakers

Connecting multiple external displays

Your desktop PC may come with VGA, HDMI, or DVI ports and allows you to connect multiple external displays.

When a graphics card is installed in your computer, connect the monitors on the output ports of the graphics card.

Setting up multiple displays

When using multiple monitors, you are allowed to set display modes. You can use the additional monitor as a duplicate of your main display, or as an extension to enlarge your Windows desktop.

To set up multiple displays:

1. Turn off your computer.
2. Connect the two monitors to your computer and connect the power cords to the monitors. Refer to Setting up your computer section in Chapter 1 for details on how to connect a monitor to your computer.

Illustration of a desktop computer setup with two monitors and a server, connected by cables (no text or symbols visible)

For some graphic cards, only the monitor that is set to be the primary display has display during POST. The dual display function works only under Windows.

1. Turn on your computer.
2. Do any of the following to open the Screen Resolution setting screen:

- Click > Control Panel > Appearance and Personalization > Display > Change display settings.

- Right click anywhere on your Windows desktop. When the pop-up menu appears, click Personalize > Display > Change display settings.

1. Select the display mode from the Multiple displays: drop-down list.

2. Duplicate these displays: Select this option to use the additional monitor as a duplicate of your main display.

3. Extend these displays: Select this option to use the additional monitor as an extension display. This increases your desktop space.
   • Show desktop only on 1 / 2: Select this option to show desktop only on monitor 1 or monitor 2.

- Remove this display: Select this options to remove the selected display.

1. Click Apply or OK. Then click Keep Changes on the confirmation message.

Connecting an HDTV

Connect a High Definition TV (HDTV) to the HDMI port of your computer.

• You need an HDMI cable to connect the HDTV and the computer. The HDMI cable is purchased separately.
  • To get the best display performance, ensure that your HDMI cable is less than 15 meters.

Illustration of a desktop computer tower connected to a monitor via USB cable (no text or symbols visible)

Chapter 4

Using your computer

Proper posture when using your Desktop PC

When using your Desktop PC, maintaining the proper posture is necessary to prevent strain to your wrists, hands, and other joints or muscles. This section provides you with tips on avoiding physical discomfort and possible injury while using and fully enjoying your Desktop PC.

To maintain the proper posture:

• Position your computer chair to make sure that your elbows are at or slightly above the keyboard to get a comfortable typing position.
• Adjust the height of your chair to make sure that your knees are slightly higher than your hips to relax the backs of your thighs. If necessary, use a footrest to raise the level of your knees.
• Adjust the back of your chair so that the base of your spine is firmly supported and angled slightly backward.
• Sit upright with your knees, elbows and hips at an approximately 90^ angle when you are at the PC.
• Place the monitor directly in front of you, and turn the top of the monitor screen even with your eye level so that your eyes look slightly downward.
• Keep the mouse close to the keyboard, and if necessary, use a wrist rest for support to reduce the pressure on your wrists while typing.
• Use your Desktop PC in a comfortably-lit area, and keep it away from sources of glare such as windows and straight sunlight.
  • Take regular mini-breaks from using your Desktop PC.

Using the memory card reader

Digital cameras and other digital imaging devices use memory cards to store digital picture or media files. The built-in memory card reader on the front panel of your system allows you to read from and write to different memory card drives.

Illustration of a desktop computer tower with an open port and a magnified inset showing the device's internal structure (no text or symbols visible)

To use the memory card:

1. Insert the memory card into the card slot.

• A memory card is keyed so that it fits in only one direction. DO NOT force a card into a slot to avoid damaging the card.

• You can place media in one or more of the card slots and use each media independently. Place only one memory card in a slot at one time.

• Select a program from the AutoPlay window to access your files.

• If AutoPlay is NOT enabled in your computer, click Windows ^® 7 Start button on the taskbar, click Computer, and then double-click the memory card icon to access the data on it.
  • Each card slot has its own drive icon which is displayed on the Computer screen.

• The memory card reader LED lights up and blinks when data is being read from or written to the memory card.

• When finished, right-click the memory card drive icon on the Computer screen, click Eject, and then remove the card.

Never remove cards while or immediately after reading, copying, formatting, or deleting data on the card or else data loss may occur.

To prevent data loss, use "Safely Remove Hardware and Eject Media" in the Windows notification area before removing the memory card.

Using the optical drive

Inserting an optical disc

To insert an optical disc:

1. While your system is on, press the eject button below the drive bay cover to open the tray.
2. Place the disc to the optical drive with the label side facing up.
3. Push the tray to close it.
4. Select a program from the AutoPlay window to access your files.

If AutoPlay is NOT enabled in your computer, click Windows® 7 Start button on the taskbar, click Computer, and then double-click the CD/DVD drive icon to access the data on it.

Removing an optical disc

To remove an optical disc:

1. While the system is on, do either of the following to eject the tray:

2. Press the eject button below the drive bay cover.
   • Right-click the CD/DVD drive icon on the Computer screen, and then click Eject.

3. Remove the disc from the disc tray.

Using the multimedia keyboard (on selected models only)

The keyboard varies with models. The illustrations on this section are for reference only.

ASUS PRIMAX/KB2621 keyboard

Keys Description
1.
2.
3.
4.
5.
6.

The special function keys only work on Windows ^® Vista / Windows ^® 7 operating systems.

ASUS KB34211 modern wired keyboard

Hot keys Description
1.	Turns the volume's mute mode on/off.
2.	Decreases the system volume.
3.	Increases the system volume.

The special function keys only work on Windows® Vista / Windows® 7 / XP operating systems.

ASUS PK1100 wired keyboard

Black ASUS computer keyboard with standard keys and a small mouse on the right (no visible text or symbols beyond brand logo)

Chapter 5

Connecting to the Internet

Wired connection

Use an RJ-45 cable to connect your computer to a DSL/cable modem or a local area network (LAN).

Connecting via a DSL/cable modem

To connect via a DSL/cable modem:

1. Set up your DSL/cable modem.

Refer to the documentation that came with your DSL/cable modem.

1. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your computer and the other end to a DSL/cable modem.

1. Turn on the DSL/cable modem and your computer.

2. Configure the necessary Internet connection settings.

Contact your Internet Service Provider (ISP) for details or assistance in setting up your Internet connection.

Connecting via a local area network (LAN)

To connect via a LAN:

1. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your computer and the other end to your LAN.

1. Turn on your computer.
2. Configure the necessary Internet connection settings.

Contact your network administrator for details or assistance in setting up your Internet connection.

Wireless connection (on selected models only)

Connect your computer to the Internet through a wireless connection.

To establish a wireless connection, you need to connect to a wireless access point (AP).

• To increase the range and sensitivity of the wireless radio signal, connect the external antennas to the antenna connectors on the ASUS WLAN Card.
• Place the antennas on the top of your computer for the best wireless performance.
• The external antennas are optional items.

To connect to a wireless network:

1. Click the network icon networks.

notification area to display the available wireless

1. Select the wireless network that you want to connect to, then click Connect.
2. You may need to key in the network security key for a secured wireless network, then click OK.
3. Wait while your computer is connecting to the wireless network.
4. The wireless connection is established successfully. The connection status is displayed and the network icon displays the connected status.

Chapter 6

Using the utilities

The Support DVD and Recovery DVD may not be included in the package. You may use the Recovery Partition feature to create the Support DVD and Recovery DVD. For details, refer to Recovering your system in this chapter.

ASUS AI Suite II

ASUS AI Suite II is an all-in-one interface that integrates several ASUS utilities and allows users to launch and operate these utilities simultaneously.

This utility is pre-installed on some models. For models without an operating system, follow the steps below to install this utility.

Installing AI Suite II

To install AI Suite II:

1. Place the support DVD in the optical drive. The Drivers installation tab appears if Autorun is enabled.
2. Click the Utilities tab, then click ASUS AI Suite II.
3. Follow the onscreen instructions to complete the installation.

Using AI Suite II

AI Suite II automatically starts when you enter the Windows® operating system. The AI Suite II icon appears in the Windows® notification area. Click the icon to open the AI Suite II main menu bar.

Click each button to select and launch a utility, to monitor the system, to update the motherboard BIOS, to display the system information, and to customize the settings of AI Suite II.

The Tool menu

The Tool menu includes the EPU, Probe II, and Sensor Recorder panels.

Launching EPU

EPU is an energy-efficient tool that provides you with a total power-saving solution. It detects the current loading and intelligently adjusts the power usage in real-time. When you select the Auto mode, the system changes modes automatically according to the current system status. It allows you to customize each mode through configuring the settings such as CPU frequency, vCore Voltage, and Fan Control.

To launch EPU:

- Click Tool > EPU on the AI Suite II main menu bar.

• * Select From EPU Installation to show the CO2 that has been reduced since you installed EPU.
• * Select From the Last Reset to show the total CO2 that has been reduced since you click the Clear button

Launching and configuring Probe II

Probe II is a utility that monitors the computer's vital components, and detects and alerts you of any problem with these components. Probe II senses fan rotations, CPU temperature, and system voltages, among others. With this utility, you are assured that your computer is always at a healthy operating condition.

To launch Probe II:

- Click Tool > Probe II on the AI Suite II main menu bar.

To configure Probe II:

• Click the Voltage/Temperature/Fan Speed tabs to activate the sensors or to adjust the sensor threshold values.
• The Preference tab allows you to customize the time interval of sensor alerts, or change the temperature unit.

Launching and configuring Sensor Recorder

Sensor Recorder allows you to monitor the changes in the system voltage, temperature, and fan speed, as well as recording the changes.

To launch Sensor Recorder:

- Click Tool > Sensor Recorder on the AI Suite II main menu bar.

To configure Sensor Recorder:

• Click the Voltage/Temperature/Fan Speed tabs and select the sensors that you want to monitor.
• The History Record tab allows you to record the changes in the sensors that you enable.

The Monitor menu

The Monitor menu includes the Sensor and CPU Frequency panels.

Launching Sensor

The Sensor panel displays the current value of a system sensor such as fan rotation, CPU temperature, and voltages.

To launch Sensor:

- Click Monitor > Sensor on the AI Suite II main menu bar.

Launching CPU Frequency

The CPU Frequency panel displays the current CPU frequency and CPU usage.

To launch CPU frequency:

- Click Monitor > CPU Frequency on the AI Suite II main menu bar.

The Update menu

The Update menu allows you to update the motherboard BIOS and the BIOS boot logo with the ASUS designed update utilities.

ASUS Update

The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows® OS. The ASUS Update utility allows you to update the BIOS directly from the Internet, download the latest BIOS file from the Internet, update the BIOS from an updated BIOS file, save the current BIOS file or view the BIOS version information.

Updating the BIOS through the Internet

To update the BIOS through the Internet:

1. From the ASUS Update screen, select Update BIOS from file, then click Next.
2. Select the ASUS FTP site nearest you to avoid network traffic.

Tick the two items if you want to enable the BIOS downgradable and Auto-BIOS backup functions.

1. Select the BIOS version that you want to download, then click Next.

When no updated version is detected, a message is displayed informing you that there is no new BIOS file from the BIOS server.

1. Click Yes if you want to change the boot logo, which is the image appearing on screen during the Power-On Self-Tests (POST). Otherwise, click No.
2. Follow the onscreen instructions to complete the update process.

Updating the BIOS through a BIOS file To update the BIOS through a BIOS file:

1. From the ASUS Update screen, select Update BIOS from file, then click Next.
2. Locate the BIOS file from the Open window, click Open, and click Next.
3. Click Yes if you want to change the boot logo, which is the image appearing on screen during the Power-On Self-Tests (POST). Otherwise, click No.
4. Follow the onscreen instructions to complete the update process.

The System Information screen

The System Information screen displays the information about the motherboard, CPU, and memory slots.

• Click the MB tab to see the details on the motherboard manufacturer, product name, version, and BIOS.
• Click the CPU tab to see the details on the processor and the Cache.
• Click the SPD tab and then select the memory slot to see the details on the memory module installed on the corresponding slot.

The Settings screen

The Settings screen allows you to customize the main menu bar settings and the interface's skin.

• Application allows you to select the application that you want to enable.
• Bar allows you to modify the bar setting,
• Skin allows you to customize the interface's contrast, brightness, saturation, hue, and gamma.

ASUS AI Manager

ASUS AI Manager is a utility which gives you quick and easy access to frequently-used applications.

This utility is pre-installed on some models. For models without an operating system, follow the steps below to install this utility.

Installing AI Manager

To install AI Manager:

1. Place the support DVD in the optical drive. If Autorun is enabled, the Drivers installation wizard appears.

If Autorun is disabled, double-click the setup.exe file from the ASUS AI Manager folder in the support DVD.

1. Click the Utilities tab, then click ASUS AI Manager.

2. Follow the onscreen instructions to complete the installation.

Launching AI Manager

To launch the AI Manager from the Windows ^® desktop, click Start > All Programs > ASUS > AI Manager > AI Manager 1.xx.xx. The AI Manager quick bar appears on the desktop.

After launching the application, the AI Manager icon appears in the Windows® taskbar.

Right-click this icon to switch between the quick bar and the main window, and to launch the AI Manager either from the quick bar or taskbar.

AI Manager quick bar

The AI Manager quick bar saves the desktop space and allows you to launch the ASUS utilities or display system information easily. Click any of the Main, My Favorites, Support or Information tab to display the menu's contents.

Click the Maximize/restore button to switch between full window and quick bar. Click the Minimize button to keep the AI Manager on the taskbar. Click the Close button to quit the AI Manager.

Main

The Main menu contains three utilities: AI Disk, AI Security, and AI Booting. Click the arrow on the Main menu icon to browse through the utilities in the main menu.

AL Disk

AI Disk allows you to easily clear temporary IE files, IE cookies, IE URLs, IE history, or the Recycle Bin. Click the AI Disk icon on the quick bar to display the full AI Disk window and select the items you want to clear. Click Apply when done.

AI Security

AI Security enables you to set a password to secure your devices, such as USB flash disks and CD/DVD disks, from unauthorized access.

To lock a device:

1. When using AI Security for the first time, you are asked to set a password. Key in a password with at most 20 alphanumeric characters.
2. Confirm the password.
3. Key in the password hint (recommended).
4. When done, click Ok.
5. Select the device you want to lock, then click Apply.
6. Key in the password you have set previously, then click Ok.

To unlock the device:

1. Deselect the locked device, then click Apply.
2. Key in the password you have set previously, then click Ok.

To change the password:

- Click Change Password, then follow the onscreen instructions to change password.

AI Booting

AI Booting allows you to specify the boot device priority sequence.

To specify the boot sequence:

1. Select a device, then click the left/right button to specify the boot sequence.
2. When done, press Apply.

My Favorites

My Favorites allows you to add applications that you frequently use, saving you from searching for the applications throughout your computer.

To add an application:

1. Click Add, then locate the application you want to add to My Favorites.
2. Click Open on the file location window. The application is added to My Favorites list.

Right click on the application icon to launch, delete, or rename the selected application. You can also double click to launch the selected application.

Support

Click any links on the Support window to go to the ASUS website, technical support website, download support website, or contact information.

Information

Click the tab on the Information window to see the detailed information about your system, motherboard, CPU, BIOS, installed device(s), and memory.

Ai Charger

Ai Charger is a unique software that allows you to quickly charge your Apple devices such as iPod, iPhone, and iPad on your ASUS computer's USB 2.0 / USB 3.0 port.

• There is no setting screen for Ai Charger. After its installation on your computer, the Ai Charger icon appears on the Windows® taskbar.
• The Ai Charger icon ( ) shows if an Apple device is connected on your computer's USB port.
• Your Apple device can only be detected if its Apple USB driver is properly installed in it.

• The current Apple devices only support USB 2.0 performance. Even when you plug your Apple device into a USB 3.0 port, the maximum charging rate is still 500mA, which is the USB 2.0 maximum charging rate. Ai Charger can increase this limit to 700mA\~900mA.
• There is no BIOS, hardware, or chipset requirements for Ai Charger.

ASUS Webstorage

ASUS webstorage is designed to help you retrieve your data to your notebooks, smartphones or tablets wherever there is internet connection.

This utility is pre-installed on some models. For models without an operating system, follow the steps below to install this utility.

Installing webstorage

To install webstorage:

Place the support DVD in the optical drive. Double-click the setup.exe file from the ASUS WebStorage folder in the Software folder in the support DVD.

Launching Webstorage

To launch the WebStorage from the

Windows ^® desktop, click Start > All

Programs > ASUS > Webstorage. The

webstorage quick bar appears in the

Windows® taskbar. Right-click this icon to switch between the quick bar and the main window

Five computer application icons: Windows, macOS, iPad, YouTube, and a circular icon (no text or symbols)

Drive

Allows your to retrieve all your backups, synced files, share groups and password protected data from here. Right-click the mouse to preview files before downloading or generating a sharing URL.

Backup

To backup your most important data with simple steps: preset a backup shcedure with your preferences in cloud storage; or select "Auto Backup" for complete data backup.

MySyncFolder

To store the updated files to MySyncFolder for easy access and share of all types of files without the limitation of location or device.

Calendar

ASUS WebStorage automatically syncs the most updated calendar events to all personal computers so that you know the exact events no matter which PC is in use.

BookmarkSyncer

The convenient BookmarkSyncer keeps our browser preference and bookmark to the cloud automatically synchronized in multiple computer.

MobileApp

ASUS WebStorage mobile applications sync your files between multiple devices. It also supports transcoding technology that allows preview and files streaming on your mobile phone.

Go to Web

Experience the value-added cloud service through ASUS WebStorage, without the risk of losing data.

Settings

1. Click the Settings icon, the settings interface appears.
2. Follow the onscreen instructions to complete the configuration.

ASUS Easy Update

ASUS Easy Update is a software tool that automatically detects the latest drivers and applications for your system.

1. From the Windows ^® notification area, right-click the ASUS Easy Update icon.
2. Select Schedule to set how often you want to update your system.

3. Select Update to activate the update.

4. Click OK to display the items you can download.

5. Check the item(s) you want to download, and then click OK.

ASUS Instant On

ASUS Instant On gives you with a quick access to the Hybrid Sleep mode.

Using ASUS Instant On

To use ASUS Instant On:

The Instant On utility is pre-installed on your computer and automatically launches after starting up your computer.

1. When starting up your computer, you can see the utility icon from Windows taskbar.

1. Press and then click OK on the confirmation message. Your system will enter the Hybrid Sleep mode.

The default hotkey is . To change it, see the section below.

Tick to not show this message next time.

Setting up ASUS Instant On

To set up ASUS Instant On:

1. Right-click the ASUS Instant On icon from Windows taskbar. The main settings screen appears.

You can choose to enable/disable ASUS Instant On hotkey, and show/hide ASUS Instant On icon from Windows taskbar.

1. Click Redefine from the main settings screen. The hotkey settings screen appears.

2. Key in the combination keys you want to use for ASUS Instant On hotkey.

3. Click OK to save your changes, and Cancel to discard the changes you made.

Nero 9

Nero 9 allows you to create, copy, burn, edit, share, and update different kinds of data

Installing Nero 9

To install Nero 9:

1. Insert the Nero 9 DVD into your optical drive.
2. If Autorun is enabled, the main menu appears automatically.

If Autorun is disabled, double-click the SeupX.exe file from the main directory of your Nero 9 DVD.

1. From the main menu, click Nero 9 Essentials.
2. Select the language you want to use for Installation Wizard. Click Next.
3. Click Next to continue.
4. Tick I accept the License Conditions. When done, click Next.
5. Select Typical then click Next.
6. Tick Yes, I want to help by sending anonymous application data to Nero then click Next.
7. When done, click Exit.

Burning files

To burn files:

1. From the main menu, click Data Burning > Add.
2. Select the files that you want to burn. When done, click Add.
3. After selecting files that you want to burn, click Burn to burn the files to a disc.

For more details about using Nero 9, refer to the Nero website at www.nero.com

Recovering your system

Using the system recovery partition

The system recovery partition quickly restores your Desktop PC's software to its original working state. Before using the system recovery partition, copy your data files (such as Outlook PST files) to USB storage devices or to a network drive and make note of any customized configuration settings (such as network settings).

About the system recovery partition

The system recovery partition is a reserved space on your hard disk drive used to restore the operating system, drivers, and utilities installed on your Desktop PC at the factory.

DO NOT delete the system recovery partition, which is the partition without volume label on Disk 0. The system recovery partition is created at the factory and cannot be restored if deleted. Take your Desktop PC to an authorized ASUS service center if you have problems with the recovery process.

Using the system recovery partition:

1. Press during bootup.
2. Highlight Windows Setup [EMS Enabled] and press .
3. From the Recover system to a partition screen, click .
4. Follow the onscreen instructions to complete the recovery process.

Visit the ASUS website at www.asus.com for updated drivers and utilities.

Using the Recovery DVD (on selected models)

Prepare 1\~3 blank writable DVDs as instructed to create the Recovery DVD.

Remove the external hard disk drive before performing system recovery on your Desktop PC. According to Microsoft, you may lose important data because of setting up Windows on the wrong disk drive or formatting the incorrect drive partition.

To use the Recovery DVD:

1. Insert the Recovery DVD into the optical drive. Your Desktop PC needs to be powered ON.
2. Restart the Desktop PC and press on bootup and select the optical drive (may be labeled as "CD/DVD") and press to boot from the Recovery DVD.
3. Select OK to start to restore the image.
4. Select OK to confirm the system recovery.

Restoring will overwrite your hard drive. Ensure to back up all your important data before the system recovery.

1. Follow the onscreen instructions to complete the recovery process.

DO NOT remove the Recovery disc, unless instructed to do so, during the recovery process or else your partitions will be unusable.

Visit the ASUS website at www.asus.com for updated drivers and utilities.

Chapter 7

Troubleshooting

Troubleshooting

This chapter presents some problems you might encounter and the possible solutions.

? My computer cannot be powered on and the power LED on the front panel does not light up

• Check if your computer is properly connected.
• Check if the wall outlet is functioning.
• Check if the Power Supply Unit is switched on. Refer to the section Turning your computer ON/OFF in Chapter 1.

? My computer hangs.

- Do the following to close the programs that are not responding:

1. Simultaneously press + + keys on the keyboard, then click Start Task Manager.
2. Click Applications tab.
3. Select the program that is not responding, then click End Task.

- If the keyboard is not responding. Press and hold the Power button on the top of your chassis until the computer shuts down. Then press the Power button to turn it on.

? I cannot connect to a wireless network using the ASUS WLAN Card (on selected models only)?

• Ensure that you enter the correct network security key for the wireless network you want to connect to.
• Connect the external antennas (optional) to the antenna connectors on the ASUS WLAN Card and place the antennas on the top of your computer chassis for the best wireless performance.

? The arrow keys on the number key pad are not working.

Check if the Number Lock LED is off. When the Number Lock LED is on, the keys on the number key pad are used to input numbers only. Press the Number Lock key to turn the LED off if you want to use the arrow keys on the number key pad.

? No display on the monitor.

• Check if the monitor is powered on.
• Ensure that your monitor is properly connected to the video output port on your computer.
• If your computer comes with a discrete graphics card, ensure that you connect your monitor to a video output port on the discrete graphics card.
• Check if any of the pins on the monitor video connector is bent. If you discover bent pins, replace the monitor video connector cable.
• Check if your monitor is plugged to a power source properly.
• Refer to the documentation that came with your monitor for more troubleshooting information.

? When using multiple monitors, only one monitor has display.

• Ensure that the both monitors are powered on.
• During POST, only the monitor connected to the VGA port has display. The dual display function works only under Windows.
• When a graphics card is installed on your computer, ensure that you connect the monitors to the output port on the graphics card.
• Check if the multiple displays settings are correct. Refer to section Connecting multiple external displays in Chapter 3 for details.

? My computer cannot detect my USB storage device.

• The first time you connect your USB storage device to your computer, Windows automatically installs a driver for it. Wait for a while and go to My Computer to check if the USB storage device is detected.
• Connect your USB storage device to another computer to test if the USB storage device is broken or malfunctions.

I want to restore or undo changes to my computer's system settings without affecting my personal files or data.

The Windows ^® System Restore feature allows you to restore or undo changes to your computer's system settings without affecting your personal data such as documents or photos. For more details, refer to the section Restoring your system in Chapter 2.

? The picture on the HDTV is distorted.

- It is caused by the different resolutions of your monitor and your HDTV. Adjust the screen resolution to fit your HDTV. To change the screen resolution:

1. Do any of the following to open the Screen Resolution setting screen:

- Click > Control Panel > Appearance and Personalization > Display > Change display settings.

- Right click anywhere on your Windows desktop. When the pop-up menu appears, click Personalize > Display > Change display settings.

1. Adjust the resolution. Refer to the documentation came with your HDTV for the resolution.

2. Click Apply or OK. Then click Keep Changes on the confirmation message.

? My speakers produce no sound.

• Ensure that you connect your speakers to the Line out port (lime) on the front panel or the rear panel.
• Check if your speak is connected to a electrical source and turned on.
• Adjust your speakers' volume.
• Ensure that your computer's system sounds are not Muted.

- If it is muted, the volume icon is displayed as . To enable the system sounds, click from the Windows notification area, then click .

- If it is not muted, click and drag the slider to adjust the volume.

- Connect your speakers to another computer to test if the speakers are working properly.

? The DVD drive cannot read a disc.

• Check if the disc is placed with the label side facing up.
• Check if the disc is centered in the tray, especially for the discs with non-standard size or shape.
• Check if the disc is scratched or damaged.

? The DVD drive eject button is not respond.

1. Click > Computer.
2. Right-click, then click Eject from the menu.

Power

Problem Possible Cause Action
No power (The power indicator is off)	Incorrect power voltage	Set your computer's power voltage switch to your area's power requirements.Adjust the voltage settings. Ensure that the power cord is unplugged from the power outlet.
	Your computer is not turned on.	Press the power key on the front panel to ensure that your computer is turned on.
	Your computer's power cord is not properly connected.	Ensure that the power cord is properly connected.Use other compatible power cord.
	PSU (Power supply unit) problems	Try installing another PSU on your computer.

Display

Problem Possible Cause Action
No display output after turning the computer on (Black screen)	The signal cable is not connected to the correct VGA port on your computer.	Connect the signal cable to the correct display port (onboard VGA or discrete VGA port).If you are using a discrete VGA card, connect the signal cable to the discrete VGA port.
	Signal cable problems Try connecting to another monitor.

LAN

Problem Possible Cause Action
Cannot access the Internet	The LAN cable is not connected.	Connect the LAN cable to your computer.
	LAN cable problems	Ensure the LAN LED is on. If not, try another LAN cable. If it still does not work, contact the ASUS service center.
	Your computer is not properly connected to a router or hub.	Ensure that your computer is properly connected to a router or hub.
	Network settings	Contact your Internet Service Provider (ISP) for the correct LAN settings.
	Problems caused by the anti-virus software	Close the anti-virus software.
	Driver problems Reinstall the	LAN driver

Audio

Problem Possible Cause Action
No Audio	Speaker or headphone is connected to the wrong port.	Refer to your computer's user manual for the correct port.Disconnect and reconnect the speaker to your computer.
	Speaker or headphone does not work.	Try using another speaker or headphone.
	The front and back audio ports do not work.	Try both the front and back audio ports. If one port failed, check if the port is set to multi-channel.
	Driver problems Reinstall the audio driver

System

Problem Possible Cause Action
System speed is too slow	Too many programs are running.	Close some of the programs.
	Computer virus attack	·Use an anti-virus software to scan for viruses and repair your computer.·Reinstall the operating system.
The system often hangs or freezes.	Hard disk drive failure	·Send the damaged hard disk drive to ASUS Service Center for servicing.·Replace with a new hard disk drive.
	Memory module problems	·Replace with compatible memory modules.·Remove the extra memory modules that you have installed, then try again.
	There is not enough air ventilation for your computer.	Move your computer to an area with better air flow.
	Incompatible softwares are installed.	Reinstall the OS and reinstall compatible softwares.

CPU

Problem Possible Cause Action
Too noisy right after turning on the computer.	Your computer is booting up.	It is normal. The fan runs on its full speed when the computer is powering on. The fan slows down after entering the OS.
	The BIOS settings have been changed.	Restore the BIOS to its default settings.
	Old BIOS version	Update the BIOS to the latest version. Visit the ASUS Support site at http://support.asus.com to download the latest BIOS versions.
Computer is too noisy when in use.	The CPU fan has been replaced.	Ensure that you are using a compatible or ASUS-recommended CPU fan.
	There is not enough air ventilation for the computer.	Ensure that your computer is working in an area with good air flow.
	The system temperature is too high.	Update the BIOS.If you know how to reinstall the motherboard, try to clean the inner space of the chassis.

If the problem still persists, refer to your Desktop PC's warranty card and contact the ASUS Service Center. Visit the ASUS Support site at http://support.asus.com for the service center information.

ASUS contact information

ASUSTeK COMPUTER INC.

Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259

Telephone [phone]

Fax [phone]

E-mail [e-mail]

Online support support.asus.com

ASUS COMPUTER INTERNATIONAL (America)

Address 800 Corporate Way, Fremont, CA 94539, USA

Telephone [phone]

Fax [phone]

Web site usa.asus.com

Technical Support

Telephone [phone]

Support fax [phone]

Online support support.asus.com

ASUS COMPUTER GmbH (Germany and Austria)

Address Harkort Str. 21-23, D-40880 Ratingen, Germany

Fax [phone]

Web site www.asus.de

Online support support.asus.com

* EUR 0.14/minute from a German fixed landline; EUR 0.42/minute from a mobile phone.

Manufacturer:	ASUSTeK Computer Inc.
Address:	No.150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN
Authorised representative in Europe:	ASUS Computer GmbH
Address:	HARKORT STR. 21-23, 40880 RATINGEN, GERMANY

ASUS Essentio Desktop PC

CM6340

Benutzerhandbuch

3D rendering of a desktop computer tower case with visible drive bays and ventilation slots (no text or labels)

G7503

Erste Ausgabe

Juli 2012

Diese Ausrüstung erfüllt die Anforderungen der Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.

Diagram showing a computer monitor connected to a server rack with an attached cable, highlighting internal components (no text or symbols present)

Diagram showing a computer tower connected to a keyboard via cable, with an inset close-up of the internal components (no text or symbols visible)

Diagram showing computer hardware components with cable and socket connection (no text or symbols)

Illustration of a desktop computer tower with a stylus inserted, showing the keyboard and mouse (no text or symbols present)

Vorderseite

Interior view of a desktop computer tower showing internal components and a close-up of the tower's front panel (no text or symbols visible)

Rückseite

Illustration of a computer tower connected to an earphone, with a magnified inset showing cable routing (no text or symbols visible)

Illustration of a desktop computer setup with two monitors and a tower connected via cables (no text or symbols visible)

Illustration of a desktop computer tower connected to a monitor via USB cable, showing connection details (no text or symbols present)

Kapitel 4

Computer verwenden

Exterior view of a server tower with an open drive and a close-up inset showing the device's port (no text or symbols visible)

Black ASUS desktop computer keyboard with standard keys and a small logo (no visible text or symbols on the keys themselves)

Kapitel 5

Drive

ASUS Easy Update

Toolbar with icons including headphones, wireless equipment, and a spiral icon (no readable text or labels)

ASUS Instant On

Nero 9

Online-Support support.asus.com

ASUS COMPUTER INTERNATIONAL (Amerika)

Adresse 800 Corporate Way, Fremont, CA 94539, USA

Telefon [phone]

Fax [phone]

Online-Support support.asus.com

Adresse Harkort Str. 21-23, D-40880 Ratingen, Germany

Fax [phone]

Online-Support support.asus.com

3D rendering of a desktop computer tower with visible drive bays and ventilation slots (no text or labels)

F7503

Première édition

Juin 2012

(Réimpression du Code of Federal Regulations #47, pièce 15.193, 1993. Washington DC : Office of the Federal Register, National Archives and Records Administration, U.S.Government Printing Office.)

Support technique ASUS local

Diagram showing computer setup with CPU, monitor, and server rack connected via cable (no text or symbols)

Diagram showing a computer tower connected to a keyboard via cable, with an inset close-up of the internal components (no text or symbols visible)

Diagram showing a computer tower connected to a rack-mounted device via cable, with an inset close-up of the internal socket (no text or symbols visible)

Lancer Windows® Update

Illustration of a desktop computer tower connected to an earphone, with a magnified inset showing cable routing (no text or symbols visible)

Illustration of a desktop computer connected to two monitors via cable, with a power strip attached (no text or symbols)

Illustration of a desktop computer tower connected to a monitor via cable, showing a close-up of the cable being inserted (no text or symbols present)

Chapitre 4

Exterior view of a desktop computer tower with an open drive and a close-up of its internal ports (no text or symbols visible)

3D rendering of a desktop computer tower with visible drive bays and a numbered indicator (1) on the front panel.

Diagram of a CD or DVD disc being inserted into a computer tower case, showing internal components and blue arrows indicating parts (no text or symbols present)

Close-up of a black computer keyboard with visible brand logos and function keys (no readable text beyond standard font labels)

Black ASUS desktop keyboard with standard keys and a small mouse on the front (no visible text or symbols beyond brand logo)

Chapitre 5

Installer AI Manager

Drive

Nero 9

3D rendering of a desktop computer tower case with visible branding (no text or symbols on the main body)

17503

Prima Edizione

Giugno 2012

Copyright © 2012 ASUSTeK Computer Inc. Tutti i Diritti Riservati.

Dichiarazione FCC (Federal Communications Commission)

Washington DC: Ufficio del Federal Register, National Archives and Records Administration, U.S. Government Printing Office.

Diagram showing a computer monitor connected to a server rack with a cable, highlighting internal components (no text or symbols present)

Diagram showing a computer tower with connected keyboard and mouse, highlighting internal components (no text or symbols present)

Diagram showing computer tower internal components connected to a power strip via cable, with an inset close-up of the internal circuit (no text or symbols visible)

Illustration of a desktop computer tower with ports and connectors, showing internal components and a close-up view of the tower's interior (no text or symbols present)

Pannello frontale
Pannello posteriore

Illustration of a computer tower connected to an earphone, with an inset magnified view showing cable routing (no text or symbols)

Illustration of a desktop computer setup with two monitors and a tower connected via cables (no text or symbols visible)

- Cliccare > Control Panel > Appearance and Personalization > Display > Change display settings.

Illustration of a desktop computer tower connected to a monitor via USB cable (no text or symbols visible)

Capitolo 4

Two views of a desktop computer tower: one showing a device with a blue circle highlighting the front panel, and another showing a close-up of its internal components (no text or symbols visible)

3D rendering of a desktop computer tower with visible drive bays and labeled ports (no text or symbols on the main body)

Diagram of a CD or DVD disc being inserted into a computer case, showing internal components and blue arrows indicating parts (no text or symbols present)

Black USB keyboard with standard keys and a visible brand logo (no text or symbols on the keys themselves)

Capitolo 5

Row of five computer and media application icons (Windows, Chrome, folder, play button, circular icon) without any text or symbols on them.

Drive

ASUS Easy Update

Toolbar with icons including headphones, Bluetooth, and a circular icon (no readable text or symbols)

ASUS Instant On

Nero 9

15 Li-Te Road, Peitou, Taipei, Taiwan 11259

Telefono [phone]

[phone]

Fax [phone]

E-mail [e-mail]

3D rendering of a black server unit with visible branding and ventilation slots (no text or symbols on the main body)

S7503

Primera edición

Junio de 2012

Diagram showing a computer monitor connected to a server rack with cable, highlighting internal components (no text or symbols present)

Diagram showing a computer tower connected to a keyboard via cable, with an inset close-up of internal components (no text or symbols visible)

Diagram showing a computer tower connected to a rack-mounted power strip and a socket, with no visible text or symbols.

Illustration of a desktop computer tower with ports and connectors, showing internal components and a close-up view of the tower's interior (no text or symbols present)

Illustration of a computer tower connected to an earphone, with a magnified inset showing cable routing (no text or symbols visible)

Illustration of a desktop computer setup with two monitors and a tower connected via cables (no text or symbols)

Illustration of a desktop computer tower connected to a monitor via USB cable (no text or symbols visible)

Capítulo 4

Uso del equipo

Illustration of a desktop computer tower with an open port and a magnified inset showing the device's internal structure (no text or symbols visible)

Black ASUS computer keyboard with standard keys and a small mouse on the right (no visible text or symbols beyond brand logo)

Capítulo 5

Conexión a Internet

Conexión por cable

Para instalar AI Manager:

Five computer application icons (Windows, Chrome, Firefox, Play, Email) arranged horizontally with no text or symbols on them.

Unidad

ASUS Easy Update

Toolbar with icons including headphones, wireless equipment, and a spiral icon (no readable text or labels)

3D rendering of a black server unit with visible branding and ventilation slots (no text or symbols on the main body)

DU7503

Eerste uitgave

Juli 2012

KC: Korea Warning Statement

B급 기기 (가정용 방송통신기자재)

ACT/ KOPPELINGS-LED SNELHEIDS-LED

LAN-poort

Diagram showing connection between a computer monitor and a server rack with connected cables, highlighting internal components (no text or symbols present)

Diagram showing a computer setup with an open desktop tower, connected to a keyboard and mouse via cable (no text or symbols visible)

De stroomkabel verbinden

Diagram showing computer tower internal components connected to a rack-mounted device via cable, with an inset close-up of the socket (no text or symbols visible)

Uw computer AAN/UIT-schakelen

Uw computer AAN-schakelen

Illustration of a desktop computer tower connected to an earphone, with a magnified inset showing cable routing (no text or symbols visible)

Illustration of a desktop computer setup with two monitors and a tower connected via cables (no text or symbols)

Illustration of a desktop computer setup with a tower and monitor, showing a cable being inserted into a USB port (no text or symbols visible)

Hoofdstuk 4

Illustration of a desktop computer tower with an open port and a magnified inset showing the device's internal structure (no text or symbols visible)

Black ASUS computer keyboard with standard keys and a small logo on the front panel (no visible text or symbols beyond branding)

Hoofdstuk 5

Station

ASUS Easy Update

Toolbar with icons including headphones, Bluetooth, and a gear icon (no readable text or labels)

ASUS Instant On

Nero 9

Online support support.asus.com

ASUS COMPUTER GmbH (Germany and Austria)

Adres Harkort Str. 21-23, D-40880 Ratingen, Germany

Fax [phone]

Web site www.asus.de

3D rendering of a black desktop computer tower with visible branding (no text or symbols on the main body)

PG7503

Primeira edição

Junho 2012

Diagram showing a computer monitor connected to a server rack with an attached keyboard and cable, highlighting internal components (no text or symbols present)

Diagram showing a computer tower with connected keyboard and mouse, highlighting internal components (no text or symbols present)

Diagram showing a computer tower connected to a rack-mounted power strip via cable, with an inset close-up of the internal socket (no text or symbols visible)

Illustration of a desktop computer tower connected to an earphone, with a magnified inset showing cable routing (no text or symbols visible)

Ligar altifalantes de 2 canais

Ligar altifalantes de 4 canais

Ligar altifalantes de 6 canais

Ligar altifalantes de 8 canais

Illustration of a desktop computer setup with two monitors and a server, connected by cables (no text or symbols)

Illustration of a desktop computer tower connected to a monitor via USB cable (no text or symbols visible)

Capítulo 4

Illustration of a desktop computer tower with an open drive and a close-up view of its internal components (no text or symbols visible)

Black USB keyboard with standard keys and a visible brand logo (no text or symbols on the keys themselves)

Capítulo 5

Ligar à Internet

Ligação com fios

Row of five computer and media application icons (Windows, Chrome, PDF, YouTube, and a circular icon) without any text or symbols on them.

Unidade

ASUS Easy Update

Toolbar with icons including headphones, Bluetooth, and a spiral icon (no readable text or labels)

ASUS Instant On

Nero 9

3D rendering of a black server unit with visible branding and ventilation slots (no text or symbols on the main body)

GK7503

Πρώτη έκδοση

Ioúvios 2012

N. America 2.412-2.462 GHz Ch01 through CH11

Japan 2.412-2.484 GHz Ch01 through Ch14

Europe ETSI 2.412-2.472 GHz Ch01 through Ch13

Σήμανση CE

CE

Diagram showing a computer setup with an open drive, connected to a monitor and a server rack (no text or symbols present)

Diagram showing a computer setup with an open desktop tower, connected to a keyboard and mouse via cable (no text or symbols visible)

Diagram showing computer tower internal components connected to a rack-mounted device via cable, with an inset close-up of the internal socket (no text or symbols visible)

Illustration of a computer tower connected to an earphone, with a magnified inset showing cable routing (no text or symbols visible)

Illustration of a desktop computer setup with two monitors and a tower connected via cables (no text or symbols visible)

Illustration of a desktop computer tower connected to a monitor via USB cable (no text or symbols visible)

Κεφάλαιο 4

Illustration of a desktop computer tower with a close-up view showing the internal components (no text or symbols)

Black Asus keyboard with standard keys and a visible brand logo (no text or symbols on the main body)

Κεφάλαιο 5

Five computer application icons: Windows, Chrome, PDF, Play, and Email (no text or symbols beyond icons)

Drive

ASUS Easy Update

ASUS Instant On