BT3600R - Docking Station PHILIPS - Free user manual and instructions

Product type	Docking station / Bluetooth speaker
Brand	Philips
Model	BT3600R
Compatibility	iPhone, iPod, Bluetooth smartphones and tablets
Output power	30 W RMS
Bluetooth connection	Version 4.0, range of 10 meters
NFC	One-touch pairing
Auxiliary input	3.5 mm jack socket
Power supply	AC adapter 100-240 V
Built-in battery	Rechargeable
Battery life	Up to 8 hours
Charging time	Approximately 3 hours
Dimensions (W x H x D)	480 x 180 x 140 mm
Weight	1.7 kg
Package contents	Station, AC adapter, remote control, audio cable
Remote control	Yes, included
Main features	Bluetooth playback, docking station, FM radio, alarm clock
Maintenance	Clean with a soft, dry cloth
Safety	Do not expose to water or moisture
Spare parts	AC adapter and remote control available
Repairability	Access to components via removable panel

Frequently Asked Questions - BT3600R PHILIPS

How do I connect my smartphone via Bluetooth?

Enable Bluetooth on your smartphone, then press the Bluetooth button on the station. Select BT3600R from the list of available devices. The connection is confirmed by an audible signal.

The device does not connect, what should I do?

Check that the station is in pairing mode and that your device is within 10 meters. Turn your device's Bluetooth off and on again. If the problem persists, delete the station from the device list and restart pairing.

How do I charge the built-in battery?

Connect the supplied AC adapter to the station and a wall outlet. Charging takes approximately 3 hours. The indicator turns off when the battery is fully charged.

Can the station be used wirelessly (without mains power)?

Yes, the station operates on a rechargeable battery. Battery life can reach 8 hours depending on the volume and playback mode.

How do I adjust the volume?

Use the + and - buttons on the station or on the remote control. Additional adjustment can be made on the source device (smartphone).

What devices are compatible with the dock?

The docking station accepts iPhones and iPods with a Lightning connector. For other devices, use the Bluetooth connection or the auxiliary input.

How do I clean the device?

Unplug the station before cleaning. Use a soft, dry cloth to dust the surface. Avoid chemical or abrasive products.

The remote control does not work, why?

Check that the battery is correctly inserted. Point the remote control at the sensor on the station. If it still doesn't respond, replace the battery with a CR2025 battery.

Can I use an auxiliary input for non-Bluetooth devices?

Yes, connect your device's headphone output to the AUX socket on the station via a 3.5 mm audio cable. Select AUX mode with the source button.

How do I set the clock?

Press the CLOCK button on the remote control, then adjust the hours and minutes with the + and - buttons. Confirm with CLOCK again.

USER MANUAL BT3600R PHILIPS

Εγχειρίδιο χρήσης

PHILIPS

2015 © Gibson Innovations Limited. All rights reserved.

This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.