HM1317CB - Drill MAKITA - Free user manual and instructions
Find the device manual for free HM1317CB MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Percussion drill |
| Brand | Makita |
| Model | HM1317CB |
| Power supply | Corded, 230 V |
| Rated power | 1300 W |
| No-load speed | 0 – 900 rpm |
| Impact rate | 0 – 4500 blows/min |
| Impact energy | 5.0 J |
| Drilling capacity | Concrete: 35 mm, Steel: 13 mm, Wood: 32 mm |
| Chuck | SDS-Plus chuck |
| Weight | 6.5 kg |
| Dimensions (L × l × h) | 450 × 110 × 260 mm |
| Cable length | 5 m |
| Main functions | Drilling, percussion drilling, chiseling |
| Safety | Safety clutch, anti-theft switch, anti-vibration handle |
| Maintenance and cleaning | Clean ventilation slots, grease the chuck regularly |
| Spare parts and repairability | Carbon brushes, brush holders, chuck, switch available |
| Included accessories | Side handle, depth stop, chuck key |
| Sound level | 94 dB(A) |
Frequently Asked Questions - HM1317CB MAKITA
How to change the SDS-Plus chuck?
To change the SDS-Plus chuck, first remove the bit by pulling the collar backward. Insert the new tool by pushing firmly until it clicks. Make sure it is locked properly before use.
How to use the percussion mode?
Turn the mode selector to the hammer position (hammer symbol). This mode is ideal for drilling into concrete or masonry.
What is the power of the HM1317CB?
The Makita HM1317CB drill has a rated power of 1300 W, offering an impact energy of 5.0 J for the most demanding jobs.
How to adjust the depth stop?
Insert the depth stop into the hole on the side handle. Adjust the desired depth by loosening the knob, then tighten it to secure the stop.
What to do if the drill does not start?
First check the power supply: plug another device into the same outlet. If the problem persists, check the carbon brushes: if they are worn, replace them.
How to maintain the drill?
Regularly clean the ventilation slots with a brush. Grease the SDS-Plus chuck with special grease. Check the condition of the carbon brushes every 50 hours of use.
Can this drill be used as a chisel?
Yes, the mode selector allows you to switch to the chiseling position (chisel symbol). Use a suitable SDS-Plus chisel for light demolition work.
What is the drilling capacity in concrete?
The HM1317CB can drill up to 35 mm diameter in concrete with an SDS-Plus bit.
How to replace the carbon brushes?
Unplug the tool. Remove the caps of the brush holders on the sides of the motor. Extract the old carbon brushes and insert the new ones, respecting the direction. Replace the caps.
Does the drill have a safety clutch?
Yes, it is equipped with a safety clutch that disengages the drive in case of bit jamming, protecting the user and the tool.
User questions about HM1317CB MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual HM1317CB - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HM1317CB by MAKITA.
USER MANUAL HM1317CB MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : HM1317CB
Category : Drill