0235-21 - Drill MILWAUKEE - Free user manual and instructions
Find the device manual for free 0235-21 MILWAUKEE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Corded electric drill |
| Brand | Milwaukee |
| Model | 0235-21 |
| Power supply | 120 V, 60 Hz, 650 W |
| Dimensions (L x W x H) | 25 x 8 x 20 cm |
| Weight | 1.6 kg |
| Drilling capacity (steel) | 10 mm |
| Drilling capacity (wood) | 25 mm |
| No-load speed | 0 – 2500 rpm |
| Chuck | Keyless, 13 mm |
| Main functions | Drilling, screwdriving, variable speed, forward/reverse |
| Safety | Double insulation, spindle brake, lockable trigger |
| Maintenance and cleaning | Unplug before cleaning; use a damp cloth; do not use solvents |
| Spare parts and repairability | Accessible brushes, replaceable chuck, Milwaukee after-sales service |
| General information | Domestic and professional use; refer to the manual for detailed safety instructions |
Frequently Asked Questions - 0235-21 MILWAUKEE
How to change the drill bit on the Milwaukee 0235-21 drill?
To change the bit, ensure the drill is unplugged. Open the keyless chuck by turning the ring counterclockwise, insert the bit, then tighten by turning clockwise.
How to adjust the rotation speed?
Speed is adjustable via the trigger. Light pressure gives slow speed, harder pressure increases speed. For constant speed, you can use the trigger lock button.
How to reverse the rotation direction?
The rotation direction is reversed using the switch located above the trigger. Push it left for forward, right for reverse.
Which drill bits can I use with this drill?
The chuck accepts bits up to 13 mm diameter. Use bits suited to the material: HSS for steel, wood bits for wood, masonry bits with hammer action (if available on this model).
How to maintain my Milwaukee 0235-21 drill?
After each use, clean the tool with a dry or slightly damp cloth. Never immerse the drill in water. Regularly check the brushes and replace them if worn. Lubricate moving parts if necessary.
What to do if the drill does not start?
Check that the drill is plugged into a functioning outlet. Ensure the trigger lock is disabled. If the problem persists, the brushes may be worn or the cord damaged; contact an authorized service.
Can I use this drill for screwdriving?
Yes, the Milwaukee 0235-21 drill is suitable for screwdriving. Use screwdriver bits with an adapter and set the speed to a moderate value to avoid damaging screws or material.
What is the power in watts of the drill?
The Milwaukee 0235-21 drill has a power of 650 watts, allowing efficient drilling in wood, metal, and plastic.
Does the drill have a hammer function?
No, this model 0235-21 is a standard drill without hammer action. For masonry, use a suitable bit and a hammer drill.
Where to find spare parts for this model?
Spare parts (brushes, chuck, switch) are available from authorized Milwaukee dealers or on their official website. Always use original parts.
User questions about 0235-21 MILWAUKEE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual 0235-21 - MILWAUKEE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 0235-21 by MILWAUKEE.
USER MANUAL 0235-21 MILWAUKEE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MILWAUKEE
Model : 0235-21
Category : Drill