5426-21 - Drill MILWAUKEE - Free user manual and instructions
Find the device manual for free 5426-21 MILWAUKEE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Corded Electric Drill |
| Brand | Milwaukee |
| Model | 5426-21 |
| Rated Voltage | 230 V |
| Frequency | 50 Hz |
| Power Consumption | 600 W |
| No-Load Speed | 0-1200 rpm |
| Variable Speed | Yes, with electronic trigger |
| Reverse | Yes |
| Chuck Type | Keyed Chuck 13 mm (1/2 in) |
| Drilling Capacity (wood) | Up to 25 mm |
| Drilling Capacity (steel) | Up to 13 mm |
| Weight | 1.8 kg |
| Cable Length | 3 m |
| Double Insulation | Yes |
| Maintenance and Cleaning | Unplug the device, clean with a dry, lint-free cloth. Do not use abrasive products. |
| Spare Parts and Repairability | Parts available from authorized dealers. Repair by Milwaukee authorized service center. |
Frequently Asked Questions - 5426-21 MILWAUKEE
How to change the chuck on the Milwaukee 5426-21 drill?
To change the chuck, insert a hex key into the retaining screw located inside the chuck, turn clockwise to remove the screw, then unscrew the chuck by turning counterclockwise. Install the new chuck in reverse order.
What is the maximum speed of the drill?
The maximum no-load speed is 1200 rpm, adjustable via the electronic trigger for progressive control.
How to adjust the drilling torque?
The Milwaukee 5426-21 drill is not equipped with a torque adjustment. Use the variable speed trigger to control the applied power.
What type of chuck is used on this model?
The model 5426-21 is equipped with a keyed chuck of 13 mm (1/2 inch), requiring a chuck key (not included) to tighten and loosen drill bits.
Can I use the drill for screwing?
Yes, thanks to the reverse and variable speed, it is suitable for screwing. Use appropriate screwdriver bits and set low speed for better control.
How to maintain the drill?
Always unplug the tool before cleaning. Clean the housing with a dry, lint-free cloth. Ventilation openings must remain clear. Do not use solvents.
Is the drill double insulated?
Yes, the Milwaukee 5426-21 has double insulation (symbol □ on the rating plate), allowing use without a ground wire.
What is the maximum drilling capacity in steel?
The drill can drill steel up to 13 mm diameter with a suitable HSS drill bit.
Where to find spare parts for this model?
Spare parts are available from authorized Milwaukee dealers or via after-sales service. Check the official Milwaukee website for service centers.
How to reverse the rotation direction?
Use the forward/reverse switch located above the trigger. Push it left for forward rotation (tightening), right for reverse rotation (loosening). Make sure the tool is stopped before changing direction.
User questions about 5426-21 MILWAUKEE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual 5426-21 - MILWAUKEE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5426-21 by MILWAUKEE.
USER MANUAL 5426-21 MILWAUKEE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MILWAUKEE
Model : 5426-21
Category : Drill