ProjectorPad P70 - Tablet AIPTEK - Free user manual and instructions

Product type	Touchscreen tablet
Brand	Aiptek
Model	ProjectorPad P70
Dimensions	190 x 120 x 10 mm (estimated)
Weight	320 g (estimated)
Power	Rechargeable lithium-ion battery, 3000 mAh
Operating system	Android
Screen	7 inches, capacitive touchscreen
Processor	Quad-core 1.2 GHz
Memory	1 GB RAM, 8 GB internal storage
Connectivity	Wi-Fi, Bluetooth, Micro USB
Camera	Front VGA, Rear 2 MP
Main functions	Internet browsing, video playback, apps, camera
Care and cleaning	Clean with a soft, dry cloth; do not use abrasive products
Safety	Do not expose to moisture; use the original charger
Spare parts and repairability	Replacement battery available; repair by authorized center
General information	User manual available for download in PDF format

Frequently Asked Questions - ProjectorPad P70 AIPTEK

How to reset the ProjectorPad P70 tablet?

To reset, go to Settings > Backup & reset > Factory data reset. Confirm the operation. All data will be erased.

How to connect the tablet to Wi-Fi?

Go to Settings > Wi-Fi, enable Wi-Fi, select your network and enter the password.

Can I insert a SIM card in the ProjectorPad P70?

The ProjectorPad P70 does not have a SIM card slot. It connects only via Wi-Fi.

How to update the operating system?

Go to Settings > About tablet > Software updates. Download and install available updates.

What is the battery life?

The battery life of the 3000 mAh lithium-ion battery is approximately 6 hours in normal use (browsing, video).

What is the screen resolution?

The 7-inch touchscreen has a resolution of 1024 x 600 pixels.

How to use an external memory card?

Insert a microSD card into the dedicated slot. Go to Settings > Storage to manage files.

How to take a screenshot?

Press the Volume down and Power buttons simultaneously for 2 seconds. The screenshot will be saved in the gallery.

How to clean the tablet screen?

Use a soft, dry cloth. Avoid harsh cleaning products that could damage the touch layer.

How to adjust screen brightness?

Swipe down from the top of the screen to open the notification panel. Adjust brightness with the slider.

USER MANUAL ProjectorPad P70 AIPTEK

Care and Safety Information

1. Keep the device and packaging materials out of the reach of infants and children.
2. Avoid subjecting the power adapter and other contacts to dripping or splashing water and dry your hands before you use it. Do not place objects filled with liquids such as vases, etc. on or near the device.
3. Make sure that the used power outlet is always readily available and never hidden. In case of emergency, use the power adapter to separate the device from the power network.
4. Keep your device away from all flames such as candles and do not set them up in the vicinity of the device.
5. Keep the unit at least 10 cm away from other objects. Make sure the ventilation is not covered by newspapers, tablecloths, curtains, etc.
6. For your own safety, do not use the projector during thunderstorms or lightning.
7. Relative Humidity is 5\~35°C, 80% (Max.), non-condensing.
8. The battery is integrated with the device. Do not dissemble and modify. The battery should be replaced by qualified service staff only.
9. Ensure that the ambient room temperature is within -10\~55°C
10. During the operation, this product may heat lightly, which is normal.
11. Wait before using if the device has been moved from a cold location into a warm one. Any condensation that has formed may in certain circumstances destroy the device. As soon as the device has reached room temperature it can be used without risk.
12. Handle the product with care. Avoid contact with sharp objects. Keep device away from metallic objects.
13. Place the projector on a flat surface. Any collision or falling to the ground is likely to damage the product.
14. Do not drop or disassemble the product otherwise the warranty voids. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
15. Use only the accessories supplied by the manufacturer.
16. Both product and user's manual are subject to further improvement or supplement without further notice.
17. Avoid facing directly into the projector's lens.

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Move the equipment away from the receiver.
• Plug the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for additional suggestions.

You are cautioned that any change or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate such equipment.

(EN)

If the time arises to throw away your product, please recycle all the components possible. Batteries and rechargeable batteries are not to be disposed in your domestic waste! Please recycle them at your local recycling point. Together we can help to protect the environment.

(DE)

Getting to know your device

1. Volume (up/down)
2. back Button
3. Speakers
4. micro SD card slot
5. LCD screen

6. Earphone jack

7. Power button

8. Home
9. Rear camera
10. Reset
11. Focus wheel

12. micro USB port

13. Projector lens

14. Projector on/off switch
15. Microphone
16. Front camera
17. Power jack

Package content

• ProjectorPad
• Power adapter
• USB adapter
• Quick Start Guide

Charging the product

The device is built-in a 4000mAh

Li-Polymer battery for mobile use.

Please charge the device for at least 8 hours prior to its first use. Connect one

end of the supplied power adapter to power jack (15) and the other end to a power outlet to start charging. Exchange the plug (EU, US, AUS) of the power adapter that accommodates the type of power outlet in your country if it is different.

Turn On/Off the device

Press the power button (2) for 3 seconds to power on the device. After booting the lock screen will appear. Unlock the device by sliding your finger to the outer ring. Press power button (2) for max 1 second to turn the device to standby mode or press the power button (2) for 2 seconds and the screen will display the power selection menu. Choose “Power off” to fully shut down the device.

Turn On the projector

When the device is powered on, press the Projector On/off switch (6) to turn on projector. Push the button again to deactivate the tablet display and just use the projection. A third press will turn off the projector and return to tablet screen.

Adjusting the Projector Focus

Adjust the focus by moving the focus wheel (14) upward or downward to get a sharp and clear picture.

USB Device Connection

The tablet can access and project the content from OTG USB device such as USB dongles or external hard disks. Connect one end of the USB adaptor to the micro-USB port (17) of the unit and the other end to USB device as shown.

External Micro SD/SDHC card slot

The device can read the following flash memory cards: Micro SD and micro SDHC cards up to 64 GB. Gently insert the card into the micro SD card slot (10) by following the direction shown aside until it reached the bottom of the slot. To remove the memory card, gently push the top edge of the card and pull it out.

Important Settings

Wi-Fi connection setting

Tap Setting icon > Wi-Fi to enable the Wi-Fi On, then tap the name of your network and enter a security password, if needed.

Languages and input setting

Set your language input preferences by tapping Settings > Language & input.

Sign in to or create a Google account

After having internet access, your tablet allows you to synchronize information with a Google account. Tap Settings > Add account to create or sign in to an account, which will be used to synchronize your contact list, email, calendar and other information.

APPs

Tap ■ in the right center of Home screen to enter the APPs screen.

Here, you can find all installed Apps. After account signed in, you can download Apps from “Play Store” and install Apps on line. Now, you can enjoy the fun time with your tablet and projection.

Troubleshooting

If your projector does not seem to be functioning properly, check the items below before you contact an authorized service center.

Symptom	Check Point
The tablet cannot be turned on.	Ensure the battery is fully charged.
The projecting image is too dark.	Use the Projector in a darker environment or decrease the size of projecting image.
The projecting image is too blurry.	Adjust the focus by using focus wheel.
The tablet cannot be operated.	If long-press the Power button cannot shut down the tablet, find a pin to push the “reset” to shut down.
Networking failure	Ensure the Wi-Fi connection setting following the instruction. Move the tablet where is with strong Wi-Fi signals.

Product Specification

Tablet
Display	7" (17.8 cm) diagonal, IPS LCD, 1024 x 600 pixels, capacitive multi-touch,
CPU	ARM Cortex-A9, 1.6 GHz Quad-Core CPU
Internal Memory	16 GB
RAM	1 GB, DDR3
Camera	Rear: 5.0 mega-pixels auto focus camera Front: 2.0 mega-pixels camera
External memory	Micro SD card slot up to 64 GB
Speaker	Stereo
Connection	Micro USB (OTG), WiFi 802.11 b/g/n, Bluetooth V4.0, headphone, micro SD
Projector
Optical technology	DLP, RGB LED
Resolution	854 x 480 Pixel (WVGA)
Aspect ratio	16:9
Projection image size	46 cm ~ 300 cm (18" ~ 120") (Diagonal)
Projection Distance	50 cm ~ 330 cm (20" ~ 130")
Brightness	Up to 50 lumens
Product Details
Power Supply	Input: 100 V ~ 240 V AC Output: 5 V, 2.4 A DC
Battery Type	Embedded, 3.7 V, 4000 mAh, Li-Polymer, rechargeable battery
Battery Lifetime	Tablet: ca. 8 h
	Projection: ca. 3 h
Power consumption	6 W
Dimension	220 mm x 119 mm x 10 mm (DxWxH)
Weight	420 g

APPs

Applications

3-

2- :

1-

الصوت

6-

5- :

4- i

جهاز العرض

لليكروفون

تشغيل جهاز العرض

USB توصيل جهاز

التطبيقات

©

重要設定

WiFi 無線連結

登錄或建立一個谷歌賬戶

APPs

簡易操作手冊

简易操作手册

调整投影焦点

语言和输入设定

简易操作手册

登录或建立一个谷歌账户

APPs

简易操作手册