S314.EU - Heating Bimar - Free user manual and instructions

Product type	Supplemental heater
Brand	Bimar
Model	S314.EU
Power supply	220-240 V ~ 50 Hz
Power	2000 W
Dimensions (L × D × H)	25 × 15 × 35 cm (estimated)
Weight	2.5 kg (estimated)
Heating type	Convection or fan (not specified)
Adjustable thermostat	Yes
Overheat protection	Yes, automatic shut-off
Automatic shut-off in case of tipping	Yes
Power levels	2 levels (estimated)
Control	Manual via buttons
Usage	Indoor only
Maintenance and cleaning	Unplug, clean with a damp cloth, do not immerse
Spare parts	Available, contact after-sales service
Repairability	Repairability index not disclosed
Warranty	2 years (standard)
Color	White (estimated)

Frequently Asked Questions - S314.EU Bimar

How to turn on the Bimar S314.EU heater?

Plug the appliance into a power outlet. Use the on/off button on the control panel. Select the desired power level (usually two positions). The indicator light turns on to show the appliance is working.

How to set the temperature on the S314.EU?

Turn the thermostat knob clockwise to increase the temperature, and counterclockwise to decrease it. Once the room temperature is reached, the appliance automatically stops and restarts when the temperature drops.

What is the maximum power of this heater?

The maximum power is 2000 W (2 levels). Use level 1 for reduced power (1000 W) and level 2 for maximum power (2000 W).

Can I use this heater in a bathroom?

No, this model is not designed for use in humid environments. Use it only in dry, well-ventilated rooms. Keep a safety distance (at least 1 meter from water sources).

How to clean the Bimar S314.EU?

Always unplug the appliance before cleaning. Use a soft, slightly damp cloth to wipe the exterior. Never immerse the appliance in water. Clean the air intake grille regularly to prevent dust buildup.

What to do if the appliance suddenly stops?

This may be due to overheating. Check that the ventilation grilles are not blocked. Let the appliance cool down for 10-15 minutes, then restart it. If the problem persists, contact after-sales service.

Does this heater have a tip-over protection function?

Yes, it is equipped with a safety switch that automatically cuts off the power in case of accidental tipping. This helps prevent any fire risk.

What is the recommended heating area?

For a 2000 W heater, the recommended area is about 20 to 25 m², depending on the room's insulation. For larger rooms, use the appliance as a supplement to central heating.

How to get spare parts for the S314.EU?

Contact Bimar after-sales service or an authorized dealer. Have the model reference (S314.EU) ready. Common parts such as the power cord or thermostat are available.

Can I leave the heater on all night?

Yes, if you set the thermostat to a moderate temperature (19-20°C). Ensure the appliance is stable, away from any flammable materials (curtains, furniture), and that the ventilation grilles are clear.

USER MANUAL S314.EU Bimar

A. Oscillating switch
B. Ionic Switch
C. Selector Knob
D. Thermostat Knob
E. Timer 24 hours
F. Switch "I/"

F

Please read these instructions carefully before using the appliance, and instruct other persons using it, too, when necessary. Keep booklet handy for further use.

GENERAL ADVISE

• This appliance is destined only to the heating of domestic or similar environments and in compliance with these instructions. It can be considered only a supplementary source of heating and not as a central heating element. The appliance must not be used in dusty environments or in the presence of extremely volatile materials which could obstruct grids or heat exchanger, nor in very damp environments, in the presence of inflammable products, or out of doors in the open. Any other use is to be considered inappropriate and therefore dangerous. The manufacturer cannot be held responsible for eventual damage caused by inappropriate, improper or irresponsible use and/or for repairs made to the product by unauthorised personnel.
• The fan heater gets hot when working; so only touch the handle and plastic Knobs. Avoid contact with the heating element.
• Ensure that the heating fan does not come into contact with water or other liquids. If this should happen, never immerse hands in the liquid but remove the plug from the socket first of all. Dry the appliance carefully and check that all the electric parts are dry. If in doubt, call a qualified expert.
• If the appliance should fall over or shows signs of faulty operation, disconnect the electrical cable immediately. Check that no part is damaged and switch it on after the appliance has been thoroughly checked: in case of doubt, contact qualified professional personnel.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• The appliance must be kept out of children's reach.
• Attention: when using electric appliances, the basic safety precautions must always be observed to avoid risks of fire, electric shocks and physical injury.
• Unplug the appliance when not in use.
• The fireguard of this heater is intended to prevent direct access to heating elements and must be in place when the heater is in use, but the fireguard does not give full protection for young children and for infirm person.
• That the user must not leave the appliance unattended while it is connected to the supply.
• Do not touch the heater with wet hands or feet.
• Never use the radiator to dry damp garments.
• Do not expose the heater to the weather (sun, rain, etc.).
• Do not pull on the power cord or the appliance to unplug the appliance from the wall socket. Never move the appliance by pulling the cord.
• If the electric cord is damaged, it has to be replaced by the supplier or an authorized service center or a professionally qualified, to avoid any risks.

This symbol show: ATTENTION do not cover the appliance when it is operating to avoid the risk of fires.

INSTALLATION

- After removing the packing materials, check the integrity of the heater; if you are unsure, do not use it and ask for qualified professional help. The packing materials (plastic bags, polystyrene foam, nails, etc.) must be kept out the reach of children because they are potential sources of danger.

- Before connecting the appliance, check that the voltage shown on the data plate matches that of your electricity and that the electric plug is grounded (230V\~50Hz). In the event of incompatibility between the electric outlet and the plug of the heater, have the outlet replaced with another more suitable type by professionally qualified personnel, who will make sure that the section of the wires of the outlet is appropriate for the absorbed power of the heater (10A). In general, the use of adapters or extension cords is not recommended; if their use is indispensable, they must conform to existing safety standards and their current capacity (amperes) must not be less than the maximum of the heater.

Attention: before use the appliance remove the detachable coupon to stick the handle.

• Before each use, verify that the heater is in good condition and that the electrical cord is not damaged: in the case of doubt, ask for professionally qualified help.
• Make sure that the cable is correctly positioned and that it is not in contact with hot parts or sharp edges, nor wrapped around the device or twisted.
• The power socket must be easy to reach so the plug can be removed quickly in case of emergency.
• Position the fan heater far from other sources of heat, inflammable materials (curtains, carpets, etc.), inflammable gases or explosive materials (spray cans) and from materials that can deform on exposure to heat. Make sure that there is 100 cm of free space in front of the fan heater and 30 cm on the sides. Do not use the heater in the immediate vicinity of a bathtub, shower or swimming pool (to avoid drops of water falling on the heater or the heater falling in the water), or in places where it could be subject to shocks.
• Don't hang it on the wall.
• Make sure that the fan heater is working correctly: if not, turn the heater off and have it checked by professionally qualified personnel.
• Make sure that the air-intake grid is not obstructed by objects, fabrics or anything else to avoid the heater overheating or breaking.
• Do not use the appliance with a timer or a programmer or with a system that can switch on the appliance automatically, to avoid risk of fire, since a fire risk exists if the heater is covered or positioned incorrectly.
• In the case of a breakdown or fault, switch off the appliance and have it checked by a professionally qualified technician; repairs made by unqualified persons can be dangerous and render void the warranty.

USE

Before each use, verify that the unit is in good condition, the electric cord is not damaged, if the power cord is damaged, it must be replaced by the manufacturer or a competent qualified electrician or a person with similar qualifications, in order to avoid any risk.

mod. S314 basic version (Fig.1)

The fan-heater is fitted with switch, thermostat, Ionising function and left-right oscillation:

- the switch sets following functions:

“0”=OFF; “”=fan; “I”=air warm (1000W); “I I”=air very hot (2000W)

• the thermostat sets the room temperature, that will be higher if the knob is rotated to position max clockwise: when the temperature is reached, it will be kept uniform
• Ionising function: this produces a flow of negative ions which neutralise the positive ions in the air; the ionising function is less evident in environments with high levels of humidity, this function is On then is selected the button (B)
• left-right oscillation: switch on the key for the swinging (TURN) to let the stove swing to the left and to the right.

To use the thermofan, please follow the instructions below:

1) Insert the plug in the current socket: the pilot light on, comes on indicating the presence of voltage.

2) Turn the thermostat knob clockwise to the position corresponding to the desired temperature:
3) To switch the appliance on, turn the selector knob (D) to the position corresponding to the desired function.
4) If desired, select the "TURN"(A) and ionizing"IONIC" (B) functions using the buttons.
5) To turn the appliance off, rotate the knob to position "0" and take the plug out of the socket.

Never leave the appliance connected to the socket if it is not in use, especially for long periods.

Mod. S315 with 24 hour programmer (Fig.2)

The appliance has a switch, a thermostat and a 24 hour programmer, Ionising function and left-right oscillation. The functions of the switch and thermostat are described in the previous paragraph; the programmer permits fan heater “on” and “off” periods to be set during a 24 hour period, and of repeating them systematically, day-after-day.

The programmer is active when the button (F) on its side is aligned with the "©" symbol; if it is aligned with the "I" symbol, the programmer is excluded.

To use the fan heater, act as described in points 1 and 2 of the previous paragraph. Also:

a) Operating with the programmer excluded (button pos. "I").

a1) Turn the switch to line up with position “T” or “I T”; the appliance comes on as does the luminous pilot light.

2 To switch off the appliance, turn the switch to pos. “0” (the pilot light goes out) and remove the plug from the current socket.

b) Operating with the programmer (button pos. ⑨).

b1) Set the right time: rotate the disc of the timer in the direction shown by the arrow meeting the right time with the reference dial.

b2) The on/off functions are regulated by small buttons on the crown: if directed inwards, the appliance remains switched off – if directed outwards it switches on. Push the button in one way or another (1 button corresponds to 30 minutes).

Adjust the position of the buttons to the times you want the fan heater on (button to the outside) or off (button to the centre): at this point, segments corresponding to the on and off periods are visible under the crown.

The programmer will repeat the same functions until they are modified or until the button remains in the “@” position.

b3) If desired, select the "TURN"(A) and ionizing"IONIC" (B) functions using the buttons.

b4) To switch off the fan heater definitively, bring the button to "T", rotate the selector to the "0" and take the plug out of the socket.

Never leave the appliance connected to the socket if it is not in use, especially for long periods.

CLEANING AND MAINTENANCE

Attention: before cleaning the appliance, turn it off, remove the plug from the outlet and wait for it to cool.

• Periodically check that the air-intake grill is not obstructed by fuzz or threads.
• Use a soft, slightly damp cloth to clean the body; do not use metal scouring pads or abrasive products.
• To clean and maintain of the grid, it is possible vacuum cleaner paying attention not to damage the electrical resistance.
• A special tool is required to replace the electrical cord: contact an authorized service center, also for any repairs.
• When the appliance is not being used, cover it and put it in a dry place. it is a good idea to put it back in its original packaging to protect it from dust and humidity.
• If you decide not to use the fan heater, we recommend that you make it inoperative by cutting the power cord (but first make sure you have removed the plug from the electrical outlet), and make those parts harmless that are dangerous when played with by children.

- Do not dispose of non-biodegradable products in the environment but dispose of them in accordance with current law. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and

resources. Bear in mind that: the body, the electrical wires are copper coated in rubber. – The electric motor is made of iron and copper. The electrical resistance is made of iron.

mod. S314 version base (Fig.1)

“0”=Aus; “♣”=Lüftung; “I”=Warmluft (1000W); “I I”=Heißluft (2000W).