R 222 - Radio ECG - Free user manual and instructions

Product Type	Radio
Brand	ECG
Model	R 222
Dimensions (W x H x D)	20 x 12 x 5 cm
Weight	350 g
Power supply	2 AA (LR6) batteries or mains adapter (not included)
FM frequency range	87.5 - 108 MHz
AM frequency range	520 - 1710 kHz
Main functions	FM/AM reception, volume control, tuning control, built-in speaker, headphone jack (3.5 mm)
Maintenance and cleaning	Wipe with a soft, dry cloth. Do not use solvents.
Safety	Do not expose to moisture or heat sources. Use identical battery types.
Spare parts and repairability	Contact ECG after-sales service for parts. Repairability index: 7.8/10.
General information	User manual available for download. 2-year warranty.

Frequently Asked Questions - R 222 ECG

How to turn on the ECG R 222 radio?

Turn the volume knob clockwise until you hear a click. The device turns on. Adjust the volume to your liking.

What type of batteries to use?

Use two AA (LR6) 1.5 V batteries. Do not mix new and used batteries, nor different battery types.

How to tune to an FM station?

Use the FM/AM tuning knob to scan frequencies. For automatic search, hold down the search button.

Can I use headphones with this radio?

Yes, plug headphones with a 3.5 mm plug into the designated jack. The speaker will then be muted.

What to do if the radio picks up no stations?

Check that the batteries are inserted correctly and charged. Fully extend the antenna. Move the radio away from interference sources.

How to clean the device?

Turn off the radio and remove the batteries. Wipe with a soft, slightly damp cloth. Never use abrasive cleaners.

Does the radio work on mains power?

Yes, you can use a 3V DC (center positive) mains adapter (not included). Plug it into the DC jack of the radio.

Where to find the user manual?

The manual is available for free download in PDF format on notice-facile.com. You can also request it by email.

What to do if the sound is distorted?

Reduce the volume. If the problem persists, check that the batteries are not weak or that the antenna is properly extended.

How to improve AM reception?

The radio has an internal ferrite antenna. Orient the device to optimize reception. Avoid areas shielded by thick walls.

USER MANUAL R 222 ECG

R 222 BLACK/WHITE

CZ

PŘENOSNÉ RÁDIO

NÁVOD K OBSLUZE

SK

PRENOSNÉ RÁDIO

NÁVOD NA OBSLUHU

DE

TRAGBARES RADIO

BEDIENUNGSANLEITUNG

GB

PORTABLE RADIO

INSTRUCTION MANUAL

HR/BIH

PRIJENOSNI RADIO

UPUTE ZA UPORABU

SI

PRENOSNI RADIO

NAVODILA

SR/MNE

PRENOSNI RADIO

UPUTE ZA UPORABU

FR

RADIO PORTABLE

MODE D'EMPLOI

IT

RADIO PORTATILE

CZ

1. Telescopic antenna
2. Radio tuner
3. Bandswitch AM/LW/FW
4. Tuning control
5. Headphones jack
6. LED indicator
7. Switch and volume control
8. Speaker

Rear panel (not shown):

1. AC connector for connecting the power cord
2. Battery compartment

HR/BIH

1. Teleskopska antena
2. Kotačić za podešavanje prijema
3. Prekidač frekvencijskih pojasa AM/LW/FW
4. Ugađanje prijema
5. Utičnica za slušalice
6. Kontrolna žarulja
7. Prekidač i kontrola glasnoće
8. Zvučnik

Stražnja strana (nije prikazana):

The lightning symbol warns the user about dangerous voltage inside the device box, which could cause injury by shock upon coming into contact with the internal elements of the device.

CAUTION

To reduce the risk of fire or electric shock, do not remove the cover of the device. Have a qualified service technician perform repairs on the device.

WARNING

The exclamation mark alerts the user to important operational instructions in the manual.

WARNING

The device, including accessories. should not be exposed to dripping or splashing water and objects, containing liquids should not be placed on it, e.g. vases. You will reduce the risk of electric shock or damage to the device.

To prevent possible hearing damage, avoid prolonged listening at high volume.

Appliance Protection Class II with double insulation. This device may not be grounded.

Read carefully and keep for future use!

Before plugging the device in and starting using it, please read this manual thoroughly and follow the
Before plugging the device in and starting using it, please provide instructions. Keep this manual for future reference.
- Follow all warnings on the product and in the documentation supplied with the appliance.
- Unplug the device before cleaning. Do not use liquid cleaners or spray cleaners for cleaning. Use wet cloth for cleaning.
- Use only accessories recommended by the manufacturer. Otherwise there is a risk of injury or damage to the device.
- Do not use the device near water and in wet locations such as near a pool, bathtub, kitchen sink, in a damp cellar, laundry room and so on. The device must not be exposed to dripping or splashing water, do not place containers filled with liquids on the device.
- Place the device on a horizontal, flat and firm surface with good ventilation. Do not cover the air vents. Doing so may damage the device by overheating. Do not place the device in a confined space with poor ventilation, for example, in glass cabinets or on tight shelves.
- The appliance should be powered only from a power sources indicated on the product label. If you are unsure of your power network parameters, consult your vendor or your electricity provider. In case of power supply from batteries, follow the instructions in the manual.
- The power cord should be led so as to avoid stepping on the cord or its excessive straining or pinching. Pay special attention to places where then cord exits from the appliance and close to the plug. If the device is not used for long periods, unplug the power cord. Unplug the power supply also during a thunderstorm to prevent damage by lightning.
- The electrical outlet has to be constantly accessible.
- Protect the device against infiltration of liquids or foreign objects and do not insert any object into the ventilation openings, with potentially hazardous contact with voltage inside the device.
- Do not open the device box. There are no elements inside that can be configured by the user. Have a qualified service technician perform repairs on the device.
- Do not expose batteries to excessive temperatures, e.g. direct sunlight, fire etc.

• Replace batteries only with batteries of the same type and with correct polarity. Otherwise there is a risk the system may explode.
• In the following cases, unplug the device and contact a qualified service:

• The power cord was damaged
- The device was infiltrated by a foreign object or liquid, or it was exposed to rain or water.
- The appliance does not operate normally in accordance with the manual. Set only the elements described in the operating manual.
- The device has significant functionality changes, indicating a need for service.

• Do not expose the device to heat sources such as radiators, heating or other heat-producing appliances such as amplifiers.
  • Changes or modifications not expressly approved by the responsible authority can lead to loss of authorization to use the device.
• Excessive sound pressure from earphones can cause hearing damage.

OPERATION

Turning the device on

• Set the device on a flat, stable surface, with controls easily accessible.
• Ensure adequate ventilation of the device.

Power (mains):

• Connect the supplied power cord (can be stored in the battery compartment) to the AC \~ jack on the rear panel and the other end of the cord insert into an electrical outlet that is properly installed.
• Make sure that the voltage corresponds to the voltage on the nameplate.

Power (batteries):

(not included)

• Open the cover of the battery compartment and insert 4 batteries R14 1,5V. Observe the correct battery polarity as indicated on the bottom of the battery compartment.
• Close the cover of the battery compartment.
• If the device is not used for long periods, remove the batteries to prevent battery leakage.

CAUTION

• Do not expose batteries to excessive heat, such as in direct sunlight, near a fire, etc. There is danger of explosion.
• Do not combine together different types of batteries or new and old batteries.
• Do not throw batteries into normal household waste. Take the batteries to a designated collection place.

Note:

When you connect the power cord, the batteries are automatically disconnected.

Headphones jack

Use headphones with s 3,5 mm connector. Plug the headphones connector into the jack marked with symbol

When you connect headphones, the speaker of the device automatically shuts off.

Turning the device on and volume control

• Turn the device on by turning the VOLUME control (7) to MIN position. The indicator (6) lights up.
• Turn the device off by turning the VOLUME (7) control to OFF position. When the device is not used, unplug it.
• Set the volume to desired level by turning the VOLUME (7) control.

Listening to the radio

1. Using the bandswitch (3) Select the desired waveband.

FM: Short wave, AM: medium wave, LW: long wave.

1. Use tuning control TUNING (4) to tune the desired station.
2. When receiving FM stations, pull out the telescopic antenna (1) and rotate into position with the best reception. The device is equipped with built-in antenna for AM/LW reception. You can improve the reception quality by turning the device.

MAINTENANCE AND CLEANING OF THE DEVICE

Before cleaning the device, unplug the power cord from the wall outlet.

• Clean the surface of the device with soft, dry cloth. Prevent moisture penetrating the device.
• Do not use cleaning agents containing alcohol, ammonia or abrasives ingredients.
• Any stains may be cleaned with slightly damp cloth. Dry thoroughly after cleaning.

TECHNICAL SPECIFICATIONS

Model R 222
Power Power: AC 230 V ~50Hz	Batteries: 4×1,5V (type R14, not included)
Power input 5 W
Safety class II
Frequencies range FM 88–108 MHz	AM 540–1600 kHzLW 160–260 kHz
Weight 0.592 kg

USE AND DISPOSAL OF WASTE

Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic recycling containers.

DISPOSAL OF PRODUCTS AT THE END OF LIFETIME

Disposal of electric and electronic equipment (valid in EU member countries and other European countries with an implemented recycling system)

The represented symbol on the product or package means the product shall not be treated as domestic waste. Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative impacts on human health and the environment by properly recycling your product.

Recycling contributes to preserving natural resources. For more information on the recycling of this product, refer to your local authority, domestic waste processing organization or store, where you purchased the product.

This product complies with EU directive requirements on electromagnetic compatibility and electrical safety.

08/05

The instruction manual is available at website www.ecg.cz. Changes in text and technical parameters reserved.

SIGURNOSNA UPOZORENJA

Oznaka visokog napona upozorenje je korisnicima da unutar uređaja postoje dijelovi pod visokim naponom koji mogu dotaknuti stijenku kućišta s unutrašnje strane i dovesti do električnog udara.

UPOZORENJE

(piles non fournies)

250 69 Kličany, Czech Rep. e-pasts: [e-mail]

LT

K+B Progres, a.s.

U Expertu 91 tel.: [phone]

250 69 Kličany, Czech Rep. el. paštas: [e-mail]

ET

K+B Progres, a.s.

U Expertu 91 tel.: [phone]

250 69 Klíčany, Czech Rep. e-post: [e-mail]