AWK100RE - Kettle BESTRON - Free user manual and instructions

Product type	Electric kettle
Brand	Bestron
Model	AWK100RE
Capacity	1.7 L
Power	2200 W
Power supply voltage	220-240 V ~ 50/60 Hz
Material	Stainless steel and plastic
Dimensions (L x W x H)	22 x 20 x 25 cm
Weight	0.8 kg
Automatic shut-off	Yes
Overheat protection	Yes
Boil-dry protection	Yes
360° swivel base	Yes
Water level indicator	Yes, with min and max markings
Removable anti-scale filter	Yes
Wide opening lid	Yes, by push-button
Cable length	70 cm
Cleaning	Clean exterior with a damp cloth; descale regularly with vinegar or descaling agent
Spare parts	Available on manufacturer's website or after-sales
Warranty	2 years

Frequently Asked Questions - AWK100RE BESTRON

What is the capacity of the Bestron AWK100RE kettle?

The Bestron AWK100RE kettle has a capacity of 1.7 liters, ideal for preparing several cups at once.

How to descale my Bestron AWK100RE kettle?

Use a mixture of white vinegar and water (1:2) or a commercial descaling agent. Boil the solution, let it sit for 15 minutes, then rinse thoroughly several times.

Does the kettle automatically turn off when water boils?

Yes, the Bestron AWK100RE kettle is equipped with automatic shut-off after boiling and boil-dry protection for added safety.

Is the base 360° swivel?

Yes, the kettle rests on a 360° swivel base, allowing it to be easily repositioned on its stand.

How to clean the exterior of the kettle?

Turn off and unplug the appliance. Clean the exterior with a soft, damp cloth. Do not use abrasive products.

Is the anti-scale filter removable?

Yes, the Bestron AWK100RE kettle has a removable anti-scale filter located in the spout. Clean it regularly under running water.

What is the power of the kettle?

The power is 2200 W, allowing quick boiling of water.

Can I heat anything other than water?

No, this kettle is designed exclusively for heating water. Do not use it for other liquids (milk, soup, etc.).

Is the power cord detachable?

No, the cord is fixed and measures approximately 70 cm. The kettle sits on a base connected to the mains.

Where can I buy spare parts or accessories?

Contact Bestron after-sales service or check the official website. Parts such as the filter, lid, or base are available.

USER MANUAL AWK100RE BESTRON

Line drawing of a standard white kettle with a gray handle and spout, no text or symbols present.

NL Handleiding snoerloze waterkoker
DE Gebrauchsanweisung kabelloser Wasserkocher
FR Mode d'emploi bouilloire sans fil

EN Instruction manual cordless jug kettle
IT Istruzioni per l'uso bollitore senza fili
ES Manual del usuario hervidor sin cable

2000-2400W, 220-240V \~ 50Hz

_

| _

一

1

VEILIGHEIDSVOORSCHRIFTEN - Algemeen

WERKING - Water koken

R. Neyman

Quality control

CONDITIONS DE GARANTIE

DÉCLARATION DE CONFORMITÉ CE

SAFETY INSTRUCTIONS - General

• Please read these instructions carefully and retain them for future reference.
  • Use this appliance solely in accordance with these instructions.
• This appliance can be used by children older than 8 years and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, but only if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Children should be supervised to ensure that they do not play with the appliance
  • Have any repairs carried out solely by a qualified electrician. Never try to repair the appliance yourself.

SAFETY INSTRUCTIONS - Electricity and heat

Certain parts of the appliance may get hot. Not touch these parts to prevent burning yourself.

• Before use please verify that the mains voltage is the same as indicated on the rating plate of the appliance.
  • Make sure that you always use an earthed wall socket to connect the appliance.
• Always remove the plug from the mains socket before moving the appliance and when the appliance is not in use.
• Remove the plug from the wall socket by pulling the plug, not the power cord.
• Check the appliance's power cord regularly to make sure it is not damaged. Do not use the appliance if the power cord is damaged. Have a damaged power cord replaced by a qualified repair service.
  • Certain parts of the appliance may get hot. Do not touch these parts to prevent burning yourself.
• Make sure that the appliance, the power cord or the plug do not make contact with hot services, such as a hot hob or naked flame.
  • Make sure that the appliance, the power cord and plug do not make contact with water.

SAFETY INSTRUCTIONS - During use

• Never use the appliance outdoors.
- Place the appliance on a flat, stable surface.
• Always remove the plug from the wall socket after use, and before cleaning the appliance.
- Never allow the power cord to hang over the edge of the draining board, worktop or table.
• Make sure that your hands are dry before touching the appliance, power cord or plug.
• Never use the appliance in a humid room.
- Never immerse the appliance, the plug or the power cord in water or other liquid.
- Do not pick up the appliance if it falls into water. Remove the plug from the wall socket immediately and do not use the appliance any more.
- Use solely the base supplied with the jug kettle. Never use the base for other purposes.
- Remove the jug from the base, and fill with water from the tap. Never fill the jug above the 'max' level (1.8 litre).
- Do not switch on the appliance before you have filled it with water. Fill only with cold water.
- The jug's lid must remain securely closed whilst the appliance is in use.
- Never open the lid when the water is still boiling.
- Use the appliance only to boil or heat water. Never use it for other liquids!
- Fill the jug kettle with at least 0,5 litre of water.
- Allow the appliance to cool to room temperature before storage
• This appliance may not be used through an external timer or by means of a remote control.

OPERATION - General

The appliance is intended only for domestic use, not for professional use.

1. Jug

2. Water-level indicator

3. Lid

4. Handle

5. On/Off switch and pilot light

6. Spout

7. Base

8. Power cord and plug

9. Limescale filter

OPERATION - Before use for the first time

When using the jug kettle for the first time boil three jugs of water, and dispose of the boiled water. This will remove the last traces from the manufacturing process.

1. Place the machine on a flat surface.

2. Fill the jug (1) with the required quantity of water (at least 0.5 litres, and a maximum of 1.8 litres). See water-level indicator (2).

3. Close the lid (3) by releasing the flap on the handle.

Make sure that you do not spill any water on the base.

1. Place the kettle flush on the base (7). Insert the plug (8) in the wall socket. Push down the On/Off switch (5). The pilot light will illuminate.

2. The kettle switches off automatically when the water has boiled. Now disconnect the kettle from the main power supply (8). Always keep the lid closed when pouring the water out.

Be careful you do not contact the hot water. It can cause serious burns.

OPERATION - Overheating safeguard

The jug kettle is fitted with an overheating safeguard. This will switch off the jug kettle if it is operated without (sufficient) water. Allow the jug kettle to cool down for at least 10 minutes before using it again.

CLEANING AND MAINTENANCE

• Remove the plug from the wall socket, and allow the appliance to cool.
• Clean the jug with a damp cloth. Never immerse the appliance in water. Never put the appliance in a dishwasher. Make sure that the electrical connections do not become damp.
• If the interior of the jug has become severely discoloured, then the best way to clean it is with a damp cloth and a little washing soda. After cleaning, rinse the jug very thoroughly.

- Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to clean the appliance.

- Before cleaning, make sure that the appliance is not connected to the power supply and that it has cooled down.

CLEANING AND MAINTENANCE - Descaling

Lime will be deposited on the inside depending on the hardness of the water. For this reason the appliance must be cleaned at regular intervals.

1. Remove the plug from the wall socket, and allow the appliance to cool.
2. The jug kettle is fitted with a descaling filter. This filter must be removed for cleaning. Press the filter (9) inward through the spout (6). The filter (9) will spring loose. You can take it out through the top opening by turning the kettle upside down.
3. Fill the jug with a vinegar solution to the MAX level, and bring to the boil.
4. Leave the jug with the vinegar solution to stand for a couple of hours.
5. Empty the jug, fill with clean water to the MAX level, and bring to the boil. Empty the jug. Repeat this process twice.

- Never use ammonia or other products to descale the appliance. These can be injurious to your health. Use solely a vinegar solution, or special descaling agents available from retailers.

- Place back the filter (9) through the top opening (3) and click it onto the spout (6).

THE ENVIRONMENT

- Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers. When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin; hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to the symbols on the product, the user's instructions or the packaging.

- The materials can be re-used as indicated. Your help in the re-use, recycling or other means of making use of old electrical equipment will make an important contribution to the protection of the environment.

- Contact your municipality for the address of the appropriate collection point in your neighbourhood.

GUARANTEE TERMS

The importer guarantees the appliance against defects caused by manufacturing and/or material faults for 60 months from the date of purchase, subject to the following conditions.

1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried out during the warranty period do not extend the warranty period.

2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty appliance (in the event of replacement of the appliance).

3. All claims submitted under warranty must be accompanied by the original bill of sale.

4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the importer.

5. The warranty is issued solely to the first purchaser and cannot be transferred.

6. The warranty does not cover damage caused by:

a. Accidents, incorrect use, wear and/or neglect.
b. Faulty installation and/or use in a manner contravening the prevailing legal, technical or safety regulations.
c. Connection to a mains voltage other than the voltage specified on the type plate.
d. Unauthorized modifications.
e. Repairs carried out by third parties.

f. Careless transport, i.e. without suitable packaging materials or protection.
7. No claims may be made under this warranty for:
a. Losses incurred during transport.
b. The removal or changing of the appliance's serial number.
8. The guarantee does not cover power cords, lamps or glass parts.
9. No claims can be submitted under this warranty for damage other than the repair or replacement of faulty parts. The importer can never be held responsible for any consequential loss or damage or any other consequences, resulting either directly or indirectly from the appliance supplied by the importer.
10. In case of claims under guarantee you can contact your dealer where the appliance is purchased. Bestron offers you also the possibility to send the appliance directly to our Service Department. Do not send your appliance without consulting us. The package may be refused and any any costs will be for your account. Please contact the Service Department and they will tell you how to pack and send the appliance.
11. This appliance is not suitable for professional use.

SERVICE

If a fault should occur please contact the BESTRON service department: www.bestron.com/service

CE DECLARATION OF CONFORMITY

This product conforms to the essential requirements of the following EU safety directives:

• EMC Directive 2004/108/EC
• Low Voltage Directive 2006/95/EC

R. Neyman Quality control