BP 1 Barrel Set - Water pump KARCHER - Free user manual and instructions

Product Type	Barrel Water Pump
Brand	Kärcher
Model	BP 1 Barrel Set
Power Supply	230 V / 50 Hz
Power Consumption	600 W
Max Flow Rate	3800 l/h
Max Delivery Head	11 m
Max Immersion Depth	5 m
Cable Length	10 m
Hose Connection	1" (25 mm)
Weight	4,5 kg
Dimensions (L × l × H)	200 × 150 × 300 mm
Housing Material	Impact-resistant Plastic
Protection Type	IPX8
Main Functions	Float switch, dry run protection, purge valve
Maintenance	Clean the suction filter regularly, rinse with clean water after use
Cleaning	Use a water jet, do not use solvents
Available Spare Parts	Cover gasket, filter, check valve, float switch
Repairability Index	8,4 / 10

Frequently Asked Questions - BP 1 Barrel Set KARCHER

What is the maximum immersion depth of the BP 1 Barrel Set pump?

The maximum immersion depth is 5 meters. Do not exceed this limit to avoid damaging the motor.

How to prime the pump before first use?

Fill the pump body with water via the discharge connection until water comes out of the purge opening. Close the purge and plug in the pump.

Can the pump run dry?

No, it is equipped with dry run protection that automatically cuts off power if there is a lack of water. Wait for water to return before restarting.

What type of hose to use with this pump?

Use a garden hose with a diameter of 1 inch (25 mm). An adapter is provided for standard connections.

How to maintain the pump after use?

Rinse the pump with clean water to remove residues. Check and clean the suction filter regularly. Store it frost-free.

Is the pump suitable for rainwater?

Yes, it is suitable for rainwater as well as clear water containing fine particles up to 1 mm in diameter.

What to do if the pump does not start?

Check the power supply, the correct cable connection, and that the float switch is not blocked. Make sure the pump is submerged and that the dry run protection has not been triggered.

What is the length of the power cable?

The power cable is 10 meters long, allowing great freedom of positioning.

Can the pump be used continuously?

Yes, the pump is designed for continuous operation. However, it is recommended not to exceed a water temperature of 35 °C.

How to winterize the pump?

Completely empty the pump and hoses. Store it in a frost-free place. Remove the filter and clean it. Keep the pump in a dry place.

USER MANUAL BP 1 Barrel Set KARCHER

Deutsch 2

English 5

Français 8

Italiano 11

Nederlands 14

Español 17

Português 20

Dansk 23

Norsk 26

Svenska 29

Suomi 32

Ελληνικά 35

Türkçe 38

Русский 41

Magyar 45

Čeština 48

Slovenščina 51

Polski 54

Românește 57

Slovenčina 60

Hrvatski 63

Srpski 66

Български 69

Eesti 72

Latviešu 75

Lietuviškai 78

Українська 81

Қазақша 84

中文 88

لطربة 1

Safety instructions for immersion pumps

Please read and comply with these safety instructions prior to the initial operation of your appliance. Retain these safety instructions for use for future reference or for subsequent possessors.

-Please read the operating instructions for your machine before using it, and pay particular attention to the following safety instructions.
-Warning and information plates on the machine provide important directions for safe operation.
—Apart from the notes contained herein the general safety provisions and rules for the prevention of accidents of the legislator must be observed.
-Keep packaging films away from children, there is a risk of suffocation!

Hazard levels

⚠️DANGER

Pointer to immediate danger, which leads to severe injuries or death.

⚠ WARNING

Pointer to a possibly dangerous situation, which can lead to severe injuries or death.

⚠CAUTION

Pointer to a possibly dangerous situation, which can lead to minor injuries.

ATTENTION

Pointer to a possibly dangerous situation, which can lead to property damage.

Safety

Electric components

⚠️DANGER

Risk of electric shock.

• Check the power cord with mains plug for damage before every use. If the power cord is damaged, please arrange immediately for the exchange by an authorized customer service or a skilled electrician.
  ■ All electrical sockets should be fixed in an area that is protected against floods.
  ■ Unsuitable electrical extension cables can be hazardous. Only use electrical extension cables outdoors which have been approved and labelled for this purpose and have an adequate cable cross-section.
  ■ The mains plug and the coupling of an extension cable must be watertight and must never lie in water. Moreover, the coupling may never lie on the ground. The use of cable reels that ensure that the sockets are at least 60 mm above the ground is recommended.

■ Do not use the power cord to carry/ transport the machine.
■ To separate the machine from the mains, pull the plug and not the power cord.
■ Do not scrape the power cord across sharp edges and ensure that it does not get pressed.
■ The voltage indicated on the type plate must correspond to the voltage of the electrical source.
■ To avoid risks, all repairs and replacement of spare parts may only be carried out by the authorised customer service personnel.
■ Operate pumps only on sockets that are equipped with a fault current protection switch with a nominal fault current of max. 30 mA and a protective-earth contact (earthing).
■ Check the fault current protection switch and the protective earth contact (earthing) for proper function at regular intervals.
■ Never operate the pumps while there are persons in the pool or garden pond.
■ Do not touch feed fluids, the rope attached to the carrying handle as well as objects that are in contact with the feed fluid (e.g. pipelines extending into the water, railings, etc.).
■ In Austria pumps to be used in swimming pools and garden ponds should be

equipped with a fixed connection line according to ÖVE B/EN 60555 Part 1 to 3; power supply should be via a ÖVE-tested isolating transformer whereby the secondary nominal voltage should not exceed 230V.

■ The electrical connection of the system may only be performed by a qualified electrician. Please follow the respective national regulations!

Safe handling

⚠ WARNING

This appliance is not intended for use by persons with limited physical, sensory or mental capacities or lacking experience and/or skills, unless such persons are accompanied and supervised by a person in charge of their safety or they have received precise instructions on the use of this appliance and have understood the resulting risks.
■ Children may only use this appliance if they are over the age of 8 and supervised by a person in charge of their safety, or if they have received instructions on the use of this appliance and have understood the resulting risks.
■ Children must not play with this appliance.
■ Supervise children to prevent them from playing with the appliance.

■ Cleaning and user maintenance must not be performed by children without supervision.
■ Turn off the appliance and remove the mains plug prior to any care and maintenance works.

⚠CAUTION

■ Create stability for the appliance prior to any work on or with the appliance to prevent accidents or damage.
In order to prevent accidents or injuries, mind the weight of the appliance during transport (see technical data).
In order to prevent accidents or injuries, mind the weight of the appliance when choosing the storage location (see technical data).

Other risks

⚠️DANGER

Danger of explosion

→ Do not pump corrosive, highly combustible or explosive fluids (e.g. petroleum, petrol, acids or nitro thinner).
→ Do not operate the device in fire or explosion-endangered surroundings.

⚠CAUTION

→ Water that has been delivered with this appliance is no drinking water!

ATTENTION

This can cause damage to the appliance.

→ Do not pump greases, oils and salt water.

→ Do not pump waste water from sanitary facilities and silty water with a lower flowability than clear water.
→ Do not pump water that has a higher temperature than 35° C.

http://www.kaercher.com/dealersearch