sPod - Microphone Reloop - Free user manual and instructions

Product Type	Condenser Microphone
Brand	Reloop
Model	sPod
Connectivity	USB-C (compatible with USB-A via adapter)
Power Supply	USB Bus (5V, 500mA)
Polar Pattern	Cardioid
Frequency Response	20 Hz - 20 kHz
Sampling Rate	48 kHz / 16 bits
Dimensions (H x Ø)	150 mm x 100 mm
Weight	400 g
Material	Metal (grille) and ABS plastic
Main Functions	Voice recording, podcasting, streaming, conferencing
Volume Control	Built-in gain knob
Headphone Output	3.5mm jack with volume control
Included Accessories	Foldable desktop stand, 1.5m USB-C cable, USB-A adapter
Care and Cleaning	Clean the grille with a soft brush; avoid moisture
Safety	Do not expose to water; disconnect during storms
Spare Parts and Repairability	Replaceable grille and USB cable; no user repair
Warranty	2 years

Frequently Asked Questions - sPod Reloop

How to connect the sPod microphone to a computer?

Connect the supplied USB-C cable to the microphone, then plug the other end into a USB port on your computer. The microphone is automatically recognized as an audio device. You can also use the included USB-A adapter if needed.

How to adjust the microphone volume?

Turn the gain knob on the front of the microphone to adjust the input level. Use the headphone volume control (separate knob) for monitoring.

Is the sPod microphone compatible with game consoles?

Yes, the sPod works with PlayStation, Xbox, and Nintendo Switch consoles via USB port, provided they support USB audio devices. Some consoles may require an additional adapter.

How to use headphone monitoring?

Plug your headphones into the 3.5mm jack on the back of the microphone. Adjust the monitoring volume with the dedicated knob. You will hear your voice in real time with no latency.

How to reduce background noise during recording?

Place the microphone about 15 cm from your mouth and use the cardioid polar pattern. Avoid reflective surfaces and use a pop filter for plosives. You can also reduce the gain if the environment is noisy.

How to clean the sPod microphone?

Use a soft brush to remove dust from the grille. For stains, gently wipe with a slightly damp cloth. Never use harsh chemicals and avoid moisture entering the interior.

What to do if my computer does not recognize the microphone?

Make sure the cable is properly connected. Try a different USB port. Check your system audio settings: the sPod should be selected as the input device. Restart the computer if necessary. If the problem persists, try another USB cable.

Can I use the sPod with a smartphone or tablet?

Yes, if your device supports USB audio peripherals. For iOS and Android devices, you will likely need a separate OTG adapter (USB-C to USB-A). The microphone is powered via the USB port.

What software to use for recording with the sPod?

The microphone is compatible with all common recording software such as Audacity, GarageBand, OBS Studio, Zoom, etc. No specific driver is required; it uses the standard system audio driver.

How to get support or a replacement part?

Contact Reloop customer service via their official website. The grille and USB cable are replaceable. Do not open the microphone yourself to avoid voiding the 2-year warranty.

USER MANUAL sPod Reloop

For your own safety, please read this operation manual carefully before initial operation! All persons involved in the installation, setting-up, operation, maintenance and service of this device must be appropriately qualified and observe this operation manual in detail. This product complies with the requirements of the applicable European and national regulations. Conformity has been proven. The respective statements and documents are deposited at the manufacturer.

Mode d'emploi

ATTENTION!

Subject to alterations!

Illustrations similar to original product!

Misprints excepted!

Keep information for further reference!

To prevent fire or avoid an electric shock do not expose the device to water or fluids!

Never open the housing!

ATTENTION!

Congratulations on purchasing the Reloop sPod. Thank you for placing your trust in our disc jockey technology. Before operating this equipment we ask you to carefully study and observe all instructions.

Please remove the Reloop sPod from its packaging. Before initial operation please make sure that the device has not been visibly damaged during transport. If you detect any damage to the included cables or the casing, do not operate the device and contact your specialised dealer.

SAFETY INSTRUCTIONS

CAUTION!

Any damage caused by the non-observance of this operation manual excludes any warranty claims. The manufacturer is not liable for any damage to property or for personal injury caused by improper handling or non-observance of the safety instructions.

• This device has left the factory in perfect condition. To maintain this condition and to ensure a risk-free operation the user must observe the safety instructions and warnings contained in this operation manual.
• For reasons of safety and certification (CE) the unauthorised conversion and/or modification of the device is prohibited. Please note that in the event of damage caused by the manual modification to this device any warranty claims are excluded.
• The inside of the device does not contain any parts which require maintenance, with the exception of wear parts that can be exchanged from the outside. Only qualified staff must carry out maintenance, otherwise warranty does not apply!
• The fuse must exclusively be exchanged against fuses of the same class, with the same trigger features and nominal current rating.
• Make sure that the power will only be supplied after the device has been fully set up. Always plug in the mains plug last. Ensure that the mains switch is in the "OFF" position when connecting the device to power.
• Only use cables that comply with regulations. Make sure that all jacks and bushes are tightened and correctly hooked up. Refer to your dealer if you have any questions.
• Ensure that when setting up the product the mains cable is not squashed or damaged by sharp edges.
• Prevent the mains cable from coming into contact with other cables! Exercise great care when handling mains cables and connections. Never touch these parts with wet hands!
• Connect the power cable exclusively to appropriate shock-proof outlets. The only supply point to be used is a supply outlet in accordance with specifications of the public supply network.
• Disconnect the device from the supply outlet when not in use and before cleaning! Be sure to hold the mains plug by the body. Never pull the mains cord!
• Position the device on a horizontal and stable low-flame base.
• Avoid any concussions or violent impact when installing or operating the device.
• When selecting the location of installation make sure that the device is not exposed to excessive heat, humidity, and dust. Be sure that no cables lie around openly. You will endanger your own safety and that of others!
• Do not rest any containers filled with liquid that could easily spill onto the device or in its immediate vicinity. If, however, fluids should access the inside of the device, immediately disconnect the mains plug. Have the device checked by a qualified service technician before re-use. Damage caused by fluids inside the device is excluded from the warranty.
• Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5° C) conditions. Keep the device away from direct exposure to the sun and heat sources such as radiators, ovens, etc. (even during transport in a closed vehicle). Never cover the cooling fan or vents. Always ensure sufficient ventilation.
• The device must not be operated after being taken from a cold environment into a warm environment. The condensation caused hereby may destroy your device. Do not switch on or operate the device until it has reached ambient temperature!
• Controls and switches should never be treated with spray-on cleaning agents and lubricants. This device should only be cleaned with a damp cloth. Never use solvents or cleaning fluids with a petroleum base for cleaning.
• When relocating, the device should be transported in its original packaging.
• When starting operation, the faders and volume controls of your amplifier must be set to minimum level. Bring the loudspeaker switches into the "OFF" position. Wait between 8 to 10 seconds before increasing the volume to avoid shot noise created by transient effect, which could cause damage to loudspeakers and the diplexer.
• Devices supplied by voltage should not be left in the hands of children. Please exercise particular care when in the presence of children.
• At commercial facilities the regulations for the prevention of accidents as stipulated by the organization of professional associations must be observed.
• At schools, training facilities, hobby and self-help workshops the operation of the device must be monitored with responsibility by trained staff.
• Keep this operation manual in a safe place for later reference in the event of questions or problems.

APPLICATION IN ACCORDANCE WITH REGULATIONS

• This device is a professional USB audio interface with integrated podcast microphone.
• If the device is used for any other purposes than those described in the operation manual, damage can be caused to the product, leading to exclusion of warranty rights. Moreover, any other application that does not comply with the specified purpose harbours risks such as short circuit, fire, electrical shock, etc.
• The serial number determined by the manufacturer must never be removed to uphold the warranty rights.

MAINTENANCE

• Check the technical safety of the device regularly for damage to the mains cord or the casing, as well as for wearout of wear parts such as rotary knobs and sliding faders.
• If it is to be assumed that a safe operation is no longer feasible then the device must be disconnected and secured against accidental use. Always disconnect the mains plug from the outlet!
• It must be assumed that a safe operation is no longer feasible if the device bears visible defects, if the device no longer functions, following longer storage under unfavourable conditions or after major transport stress.

SCOPE OF SUPPLY

1x Reloop sPod

1x Reloop USB cable

1x Reloop 3.5 mm / 3.5 mm jack cable

1. DESIGN

1. Mic Gain:

Adjusts the internal microphone's input.

2. Pad Switch:

Via this switch the microphone's gain can be decreased by 10. This way it is possible to achieve distortion-free recordings in extremely loud surroundings, such as live concerts.

3. Low Cut:

When activated (switch is positioned to the right), especially deep frequencies (80 Hz) that may not be unwanted for certain recordings (vocals), will not be recorded.

4. Status LED:

This LED is illuminated when the sPod is properly connected to a computer.

5. Headphones Volume:

Adjusts the headphones volume at the output (7).

6. USB Port

7. 3.5 mm Headphones Output

2. OPERATION

Microphone recordings:

• Connect the sPod to your computer using the included USB cable. Open your favoured audio software and select the sPod as input device.
• Select the desired level at the microphone (1).
• Connect your headphones and select the output volume (5).
• Start your recording.

Note:

Please visit www.audacity.de to download a free recording software.

TECHNICAL SPECIFICATIONS

Voltage: DC, 5.0V

S/N Ratio: 59 dB

Sensitivity: -46 dB

Frequency Range: 50 Hz - 18 kHz

Weight: 485 g

Compatible with: WIN2000/XP/VISTA/7/MAC OSX

HS170N3

ENGLISH