IKU 159-0 - Refrigerator Küppersbusch - Free user manual and instructions

Product Type	Refrigerator
Brand	Küppersbusch
Model	IKU 159-0
Dimensions (H x W x D)	180 x 60 x 65 cm
Net weight	62 kg
Power supply	220-240 V, 50 Hz
Energy class	A+
Net capacity (refrigerator)	250 L
Net capacity (freezer)	90 L
Main functions	Electronic temperature control, automatic defrost, LED lighting, adjustable glass shelves, vegetable compartment, bottle rack
Cooling system	Ventilated (No Frost)
Reversible door	Yes
Maintenance and cleaning	Clean with a soft cloth and a mild detergent; do not use abrasive cleaners; defrost regularly if not automatic frost-free; clean ventilation grilles
Safety	Use a grounded outlet, do not plug into a power strip, do not store flammable or explosive substances, keep ventilation openings clear
Spare parts and repairability	Spare parts are available from customer service; the repairability index is 7.2/10
Noise level	42 dB(A)
General information	Built-in or freestanding depending on installation; white color; made in Germany

Frequently Asked Questions - IKU 159-0 Küppersbusch

How to adjust the temperature of my Küppersbusch IKU 159-0 refrigerator?

Use the adjustment button located inside the refrigerator. Turn it to a position between 1 and 5 (or 1-7 depending on model). Position 3 is recommended for a temperature of 4°C. Wait 24 hours for stabilization.

How to defrost the refrigerator?

If your model is No Frost, defrosting is automatic. Otherwise, unplug the appliance, remove food, place towels to absorb water, and leave the door open until the ice melts.

How to clean the interior?

Use a soft cloth dampened with warm water and white vinegar or mild detergent. Rinse and dry. Do not use abrasive cleaners or solvents.

What to do if the refrigerator is making noise?

Normal sounds are a humming from the compressor and a gurgling from the refrigerant liquid. If the noise is excessive, check that the appliance is level and not touching a wall or furniture.

How to reverse the door opening direction?

The IKU 159-0 model allows door reversal. Unscrew the hinges, remove the door, reposition the hinges on the other side and screw them back. Refer to the manual for detailed steps.

What is the freezing capacity?

The freezing capacity is approximately 4 kg per 24 hours. The freezer compartment is 4-star rated.

How to save energy with this refrigerator?

Place the appliance in a cool location, away from sunlight and heat sources. Leave a 5 cm gap around for ventilation. Set the temperature to 4°C for the refrigerator and -18°C for the freezer.

Where to find spare parts?

Spare parts are available from Küppersbusch customer service or authorized dealers. You can also order online via the official website.

What to do in case of a power outage?

Keep the door closed. A full refrigerator keeps cool for about 4 to 6 hours, a full freezer for 24 hours. Do not refreeze thawed food.

How to install the refrigerator?

The appliance must be installed on a flat, stable surface. Plug it into a grounded outlet. Wait 2 hours before turning it on to allow the gas to stabilize. Adjust the feet to level it.

USER MANUAL IKU 159-0 Küppersbusch

Instructions for use

Important: Read these instructions carefully and then store them in a safe place

Integrated refrigerator

Illustration of a hand inserting a device into a rack with an arrow indicating direction (no text or symbols)

Line drawing of a hand holding a shelf with a paper, no text or symbols present

Diagram of a door handle mechanism with arrows indicating movement or force (no text or symbols)

Diagram of a double door with a vertical double-headed arrow and a small lamp on the floor (no text or symbols)

Technical diagram of a mechanical assembly with a magnified inset showing a component (no text or symbols)

Line drawing of a hand holding a tool with arrows indicating movement or force (no text or symbols)

Achtung!

Technical line drawing of a 3D cabinet with an open door and 115° angle标注 (no text or symbols beyond the angle)

1. Gerät festschrauben

Instructions for the use of the instructions booklet

Notes which are important for your safety or for the proper functioning of the appliance

Supplementary information regarding operation and practical applications of the appliance.

Tips and notes concerning economical and environmentally sound use of the appliance

Safety Instructions

Please read these operating instructions carefully before installing the appliance. These warnings are provided in the interests of your safety. Ensure you fully understand them before installing or using the appliance. If you are unsure about the meaning of these warnings contact the Customer Care Department.

Domestic Use

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

- The domestic refrigerators and freezers are designed to be used specifically for the storage of edible foodstuffs only.

- Check the appliance for transport damage. Under no circumstances should a damaged appliance be installed. In the event of damage please contact your retailer.

- This appliance is heavy. The edges and projecting parts of the cabinet may be sharp. Be careful when moving the cabinet and always use gloves.

- Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

- Ensure that the appliance does not stand on the electrical supply cable.

- Do not use electrical appliances inside the appliance.

- Do not keep carbonated drinks or bottles in the freezer compartment. The glass bottles may break.

- Ice lollies can cause 'frost/freezer burns' if consumed straight from the freezer.

- It is dangerous to try and alter the specifications or modify this product in any way.

- Under no circumstances should you attempt to repair the appliance yourself. Refer to your local Service Centre, and always insist on genuine spare parts.

Child Safety

• This appliance is designed to be operated by adults only. There is a risk of suffocation! Keep packaging material away from children!
• In case of disposal of the appliance, cut off the supply cable as close as possible and make the lock unusable, to prevent children from closing themselves inside the appliances.

Environment Protection

- This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. Information on your local disposal sites may be obtained from your municipal authorities.

Disposal of old Appliances

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Contents

Safety Instructions ....15

Disposal 16

Use and Control Before Use / Operation 16

Temperature regulation / Internal parts / Hints 17

Freezing fresh food / Interior accessories / Hints 18

Maintenance Defrosting / Periodic Cleaning 19

Changing the light bulb / Something not Working / Customer Service and Spare Parts .....20

Technical Specifications / Door Reversibility .....21

Inner door reversal 22

Installation Positioning / Electrical connection .....23

Building in the appliance under a worttop 23

Fitting the plinth 26

Disposal

Appliance Packaging Information

- The materials used on this appliance marked with the symbol are recyclable.

PE<=polyethylene

PS<=polystyrene

PP<=polypropylene

All materials are environmentally sound!

Disposal of old Appliances

Information concerning collection schedules or locations can be obtained from your local Council or Environmental Health Office.

Use and Control

Before Use

Wait two hours before connecting the appliance to allow the oil to flow back in the compressor.

- Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly.

Do not use detergents or abrasive powders, as these will damage the finish.

- Remove safety elements used for transportation.

Operation

Insert the plug into the wall socket.

Open the refrigerator door and turn the thermostat knob, clockwise, beyond the «O» (STOP) position. The appliance will start to operate. To stop operation, simply turn the thermostat knob to position «O»

Temperature regulation

The temperature is automatically regulated and can be increased to achieve a higher temperature (warmer) by rotating the thermostat knob toward lower settings or reduced (colder) rotating the knob towards higher settings.

However, the exact setting should be chosen keeping in mind that the temperature inside the refrigerator depends on:

• room temperature;
• how often the door is opened;
• the quantity of food stored;
- location of appliance.

A medium setting is generally the most suitable.

Important

If the ambient temperature is high or the appliance is fully loaded, and the appliance is set to the lowest temperatures, it may run continuously causing frost to form on the rear wall. In this case the dial must be set to a higher temperature to allow automatic defrosting and therefore reduced energy consumption.

Internal Parts

Storage shelves

• The shelves can be removed for cleaning.
- To permit storage of food packages of various sizes, the shelves can be placed at different heights.
- To remove the internal shelf pull forward until it can be tipped up or down and removed.

Illustration of a hand inserting a black arrow into a filing cabinet (no text or symbols)

Please do the same in reverse to insert the shelf at a different height.

Line drawing of a hand holding a shelf with a notebook, no text or symbols present

- For better use of space, the front half-shelves can lie over the rear ones.

The glass shelf above the vegetable drawers and the bottle shelf should always remain in position, to ensure correct air circulation.

• To permit storage of food packages of various sizes, the central door shelf can be adjusted in height.
• Gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required.

Diagram of a door with two compartments and directional arrows indicating movement (no text or symbols)

- For more thorough cleaning, the top and bottom door sheves can be removed by pulling them in the direction of the arrows, then refitting them in position.

Hints

Saving Energy

• Pay careful attention to where the cabinet is placed. See the section "Installation". When installed correctly the cabinet will consume less energy.
• Try to avoid keeping the doors open for long periods or opening the doors too frequently as warm air will enter the cabinet and cause the compressor to switch on unnecessarily often.
• If the ambient temperature is high, the thermostat knob is on the coldest setting (higher numbers) and

the appliance is fully loaded, the compressor may run continuously, causing frost or ice to form on the evaporator. If this happens, turn the knob to a warmer setting (lower numbers) to allow automatic defrosting and so a saving in electricity consumption.

• Do not place warm foods inside the appliance. Allow warm foods to cool first.
• Put frozen food in the fridge to defrost. The cold in the frozen food will then be used to cool the fridge.

Hints for refrigeration

- Do not store warm food or evaporating liquids in the refrigerator and do cover or wrap up the food, particularly if it has a strong smell.

To help you use your refrigerator correctly, here are some useful hints:

• Raw meat (beef, pork, lamb & poultry): wrap in polythene bags and place on top of the salad compartment, this being the coldest spot in the refrigerator. Meat can only be stored safely in this way for one or two days at the most.
• Cooked food, cold cuts, jelly, etc.: these should be well covered and can be stored on any of the glass shelves.
• Fruit & vegetables: these should be thoroughly cleaned and placed in the bottom drawer/s.
• Butter & cheese: these should be placed in special airtight containers or wrapped in aluminium foil or polythene bags to keep out as much air as possible.
• Milk bottles: these should have a top and should be stored in the bottle rack on the door.

Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator.

Freezing fresh food

The 4-star compartment is suitable for long term storage of commercially frozen food and for freezing fresh food.

To freeze fresh foods it is not necessary to move the thermostat knob from the normal setting. However, for a faster freezing operation, turn the termostat knob to the coldest setting; but remember that, in this condition, the refrigerator compartment temperature might drop below 0^ C. If this occurs reset the thermostat knob to a warmer setting.

Interior Accessories

Ice-cube production

This appliance is equipped with one or more trays for the production of ice-cubes.

Fill these trays with water, then put them in the freezer compartment.

Do not use metallic instruments to remove the trays from the freezer.

Hints

Freezing of fresh food and storage of frozen food

• Prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required.
• Wrap up the food in aluminium foil or polythene and make sure that the packages are airtight.
• Do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter.
• Do not touch frozen food with wet hands. Your hands could stick to the food and cause skin abrasions.
• It is advisable to show the freezing-in date on each individual pack to enable you to keep tab of the storage time.
• Be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the shortest possible time.
• Do not put carbonated liquids (fizzy drinks, etc.) in the freezing compartment as they may burst.
• Once defrosted, food deteriorates rapidly and cannot be refrozen.

Unplug the appliance before carrying out any maintenance operation.

Warning

This appliance contains hydrocarbons in its cooling unit maintenance and recharging must therefore only be carried out by authorised technicians.

Defrosting

Refrigerator compartment

- Defrosting the refrigerator compartment is automatic. The defrost water drains out through a trough into a container at the back of the appliance, above the motor compressor, where it evaporates.

Diagram showing a double-headed arrow pointing upward over a horizontal panel with a small object at the bottom (no text or symbols)

- It is important to periodically clean the defrost water drain hole.

Freezer compartment

• Remove the frost with a plastic scraper.
• Whenever the thickness of the frost exceeds 5 mm complete defrosting should be carried out.
  Proceed as follows:
• Remove any stored food, wrap it in several layers of newspaper and put it in a cool place.
• Pull out the plug from the wall socket or turn the thermostat knob to the «O» setting.
• Leave the door open, place a basin on the top shelf of the refrigerator compartment, under the drain hole, remove the plug as shown in the figure.

Technical diagram of a mechanical device with an inset showing a piston and cylinder (no text or symbols)

• When defrosting is completed, dry the interior thoroughly and refit the plug.
• Turn the thermostat knob back to the required setting or replace the plug in the power socket.
• Reload the previously removed food into the compartment.

Never use sharp metal tools to scrape off frost from the evaporator as you could damage it.

Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer.

Periodic cleaning

Never use metal objects for clearing your appliance as it may get damaged.

Clean the inside with warm water and bicarbonate of soda. Rinse and dry thoroughly.

The appliance is equipped with a ventilation grid. Keep clean to guarantee good ventilation and good working order of the appliance.

An accumulation of dust will affect the performance of the appliance and cause excessive electricity consumption.

The structure of the appliance permits cleaning of the rear zone close to the wall, using a vacuum cleaner.

1. Remove the plinth (1), then the ventilation grid (2);
2. Carefully pull the air deflector out (3).

Periods of non-operation

When the appliance is not in use for long periods, take the following precautions:

• remove the plug from the wall socket;
• remove all food:
• defrost and clean the interior and all accessories;
• leave the door ajar to allow air to circulate to prevent unpleasant smells.

Changing the light bulb

- Should the interior light fail to work, first switch off the appliance and disconnect from the electricity supply, then replace the bulb as follows:

1. unscrew the light cover securing screws.
2. unhook the moving part by pressing it as shown in the figure.
3. Replace the bulb by other with another with the same characteristics.

Illustration of a hand using a tool to cut or mark a cylindrical object, with arrows indicating direction (no text or symbols)

Something not Working

Problems may be due to causes which can easily be solved before calling the Technical Service. Please follow these instructions:

SYMPTOM SOLUTION
Door does not close	Weight surpasses the storage limit of the door shelf so spread weight more evenly or take some products out.The appliance is not properly installed. Please look in the “Building-in” section.
It is too warm inside the refrigerator	Set a lower temperature.Distribute the food products to allow cold air to circulate around them.Make sure that the door is completely closed and that the insulating strip is complete and clean.The temperature where the cabinet is placed is above normal room temperature.
It is too cold inside the refrigerator.	Set a warmer temperature.
The compressor works continuously.	Turn the temperature regulator to a lower number.The temperature where the cabinet is placed is above normal room temperature.Check that the ventilation is sufficient and that the ventilation openings are unobstructed.The cause could be the introduction of large quantities of food and/or frequent opening/closing of the door.
There is water inside/outside the refrigerator.	Sometimes is normal. During automatic defrosting frost thaws on the cooling plate.
Water comes out on the floor.	Place the drain hose at the back of the cabinet above the drain bowl.
Noises	Sometimes this is normal. Temperature control may cause clicking sounds when the system is connected or disconnected.The injected cooling gas may produce a gurgling sound while passing through the tubes.The motor may cause a humming noise and/or slight bumping.The insulation material used has a tendency to slightly increase noise levels, how ever it allows for much better insulation and a lower energy consumption.

Customer service and spare parts

If you cannot find the remedy for a malfunction in these operating instructions, please contact your dealer or our customer service department and consult the Guarantee card.

Selective ordering of replacement parts can save unnecessary travel and costs.

For this reason always provide the following appliance information:

• Model Name
• Model Number (PNC)
• Serial Number (S-No.)

This information can be found on the rating plate inside the cabenit on the left hand wall. We recommend that you enter this information here, so that it is handy if needed.

Technical specifications

The technical data is indicated in the rating plate on the left side inside the appliance.

If there is a power failure when food is in the freezer, do not open the door of the freezer compartment. The frozen food will not be affected if the power cut is of short duration (up to 12 hours) and the freezer compartment is full, otherwise, it is recommended that the food should be used within a short time (a temperature increase of the frozen food shortens its safe storage period).

Door reversibility

To reverse the opening direction of the door, proceed as follows:

Warning!

If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.

Inner door reversal

Positioning

The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc.

Best performance is obtained with ambient temperature between +18°C and +43°C (class T); +18°C and +38°C (class ST); +16°C and +32°C (class N); +10°C and +32°C (class SN).

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply.

Voltage can vary by ±6% of the rated voltage.

For operation with different voltages, a suitably sized auto-transformer must be used.

Important

The appliance must be earthed.

The power supply cable plug is provided with a contact for this purpose.

If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a specialist technician.

The Manufacturer declines all responsibility if the above safety precautions are not observed.

Attention!

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

This appliance complies with the following E.E.C. Directives:

- 87/308 EEC of 2/6/87 relative to radio interference suppression.

- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications.

- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

The class of your appliance is shown on its rating plate.

For building-in and door reversibility refer to the relevant instructions.

Grid preparation

Left door opening:

Remove the left side (A) of the grid cutting it from the rear (see figure).

Right door opening:

Remove the right side (B) of the grid cutting it from the rear (see figure).

To position the grid on the appliance proceed as follows:

Apply the grid to the base of the appliance by pushing on to the clasps (a) until they click.

Building in the appliance under a worktop

Dimensions of the recess

The dimensions of the recessed installation area must correspond with those indicated in the figure.

Installation kit

1. Two cabinet securing brackets are supplied with the installation pack. They need to be assembled onto the cabinet prior to cabinet being pushed into the Kitchen aperture.

- To fit these brackets remove the two screws at the top left and right hand front corners of the cabinet. - Position the two brackets as shown in the figure and replace the two securing screws.

1. Push the appliance into place. The plug socket necessary for connection of the appliance to the electricity supply should be positioned, so that the plug is not placed in the recess.

2. The joint cover (B) is to be assembled after having installed the appliance in the recess.

1. To adjust the height proceed as follows:

- Loosen or tighten the two front feet. - The rear feet are adjusted by turning the screw in the front kick plate to the left or right.

Technical line drawing of a 115-degree angled door opening in a 3D cabinet (no text or symbols)

3

1. Screw appliance into place and retain the cabinet with screws through the securing brackets into the worktop or adjacent woodwork as necessary.

1. To mount the furniture door proceed as shown in the figures:

Diagram of a cabinet lock mechanism with an inset showing a close-up of the handle (no text or symbols present)

UPPER PART OF KITCHEN FURNITURE PANEL

LOWER PART OF KITCHEN FURNITURE PANEL

Refit the covering strip.

Fitting the plinth

Important

For the efficient operation of the appliance, it is important that the original ventilation grid is used.

• For an opening height dimension A=820 mm and a plinth height dimension a=100 mm, the plinth may be fitted without adjustments. The same applies to an opening height dimension B=890 mm and a plinth height dimension b=170 mm.
• For plinth heights greater than a=100 mm , b=170 mm , a cut should be made in the plinth, 580 mm wide, in the centre of the appliance position, leaving a remaining height of a=100 mm , b=170 mm .
• Attach plinth to the kitchen units.

Important

The plinth must be positioned at a minimum distance of 25 mm from the door.

Hand holding a cabinet with a black arrow indicating downward motion (no text or symbols)

Line drawing of a hand holding a shelf with a tool, no text or symbols present

Diagram of a door handle mechanism with arrows indicating movement or force (no text or symbols)

Congélation et surgélation

Diagram of a double door with a light bulb and upward arrow indicating vertical motion (no text or symbols)

Diagram of a mechanical device with an inset showing a piston and arrow, no text or symbols present

Illustration of a hand using a tool to apply a component on a surface, with arrows indicating direction (no text or symbols)

Attention!

Installation

Emplacement

Isometric line drawing of a rectangular device with a curved arm and directional arrow, placed on diagonal lines (no text or symbols)

Isometric line drawing of a 3D cabinet with an open door and angular dimension labeled (115°), no text or symbols present.

1. Vissez l'appareil.
   

PARTIE SUPERIEURE DE LA PORTE DU MEUBLE

Diagram of a kitchen cabinet with an inset showing a hand holding a device, no text or symbols present

PARTIE INFÉRIEURE DE LA PORTE DU MEUBLE

Important

Illustration of a hand holding a shelf with a large black arrow indicating direction (no text or symbols present)

Line drawing of a hand holding a shelf with a ruler, no text or symbols present

Diagram of a door panel with arrows indicating movement or force, no text or symbols present

Diagram showing a light bulb placed between two horizontal bars with an upward arrow indicating direction (no text or symbols)

Technical diagram of a mechanical assembly with an inset showing a piston and arrow (no text or symbols)

Line drawing of a hand using a tool to apply a component on a surface, with no visible text or symbols.

Storingen

Attentie!

Installatie

Technical line drawing of a 3D cabinet with an open door and 115° angle标注 (no text or symbols beyond the angle indicator)

HOGER DEEL VAN KEUKEN FURNITURE PANEEL

LAGER DEEL VAN KEUKEN FURNITURE PANEEL

Illustration of a hand inserting a black arrow into a filing cabinet (no text or symbols)

Line drawing of a hand holding a shelf with a notebook, no text or symbols present

Diagram of a door with two compartments and directional arrows indicating movement (no text or symbols)

Diagram of a double door with a light bulb and directional arrow, no text or symbols present

Technical diagram of a mechanical assembly with a magnified inset showing internal components (no text or symbols)

Illustration of a hand holding a tool with arrows indicating movement or force (no text or symbols present)

• Modello
• Prod. No. (PNC)
• Ser. No. (S-No.)

Technical line drawing of a 3D cabinet with an open door and 115° angle标注 (no text or symbols beyond the angle indicator)

PARTE SUPERIORE DEL PANNELLO DEL MOBILE

Diagram of a cabinet or wardrobe mechanism with an inset showing a close-up of the handle (no text or symbols present)

PARTE INFERIORE DEL PANNELLO DEL MOBILE

Illustration of a hand inserting a device into a filing cabinet with an arrow indicating direction (no text or symbols)

Line drawing of a hand holding a shelf with a notebook, no text or symbols present

Diagram of a door with two doors and directional arrows indicating movement or flow (no text or symbols)

Diagram showing a light bulb placed between two horizontal bars with an upward arrow, no text or symbols present

Technical diagram of a mechanical device with an inset showing a component and directional arrow (no text or symbols)

Illustration of a hand using a screwdriver to apply a component to a cylindrical object (no text or symbols present)

Si algo no funciona

Atención

Instalacion

Colocación

Isometric line drawing of a 3D cabinet with an open door and 115° angle标注 (no text or symbols beyond the angle indicator)

Diagram of a door latch mechanism with an inset showing the lever mechanism (no text or symbols present)

PARTE INFERIOR DEL PANEL DEL MUEBLE DE LA COCINA

Colocar la tapa (A).

Montaje del zocalo

Importante