FAH 18 B2 - Hedge Trimmers FLORABEST - Free user manual and instructions

Product Type	Cordless Hedge Trimmer
Brand	Florabest
Model	FAH 18 B2
Power Source	Battery (18 V Li-ion)
Battery Voltage	18 V
Blade Length	51 cm (20")
Cutting Capacity	18 mm max branch thickness
Weight (without battery)	2.7 kg
Sound Pressure Level (LpA)	82 dB(A)
Vibration Level (ah)	3.5 m/s²
Safety Features	Two-hand operation, hand guard, blade safety cover
Blade Material	Hardened steel, laser-cut, diamond-ground
Battery Compatibility	Florabest 18 V battery system (e.g., FAB 18 Li A1)
Charger Included	Yes (model FAST 18 A1)
Blade Maintenance	Clean after use, lubricate with light machine oil
Storage Recommendation	Store in dry place, use blade cover, remove battery
Device Weight (with battery)	3.2 kg
Cutting Stroke Rate	2400 min⁻¹
Protection Class	IPX0 (not waterproof)
Repairability Index	7.5 / 10

Frequently Asked Questions - FAH 18 B2 FLORABEST

What battery does the Florabest FAH 18 B2 use?

The FAH 18 B2 uses an 18 V Li-ion battery from Florabest's 18 V system, such as the FAB 18 Li A1. It is compatible with all Florabest 18 V tools.

How long does the battery last on a full charge?

Battery life depends on the thickness of branches and usage conditions. Typically, a 2.0 Ah battery provides about 30-45 minutes of continuous cutting, while a 4.0 Ah battery lasts up to 90 minutes.

Can I use other brand batteries with this hedge trimmer?

No, only Florabest 18 V batteries are recommended. Using other brands may cause damage or safety hazards due to different voltage or connector designs.

How do I sharpen the blades of the FAH 18 B2?

Blades are self-sharpening due to a grinding process. If needed, sharpen with a fine file or have it done professionally. Always remove the battery before maintenance.

What oil should I use to lubricate the blades?

Use a light machine oil, such as SAE 20 or 3-in-1 oil. Apply a thin layer along the cutting edge after each use and before storage.

Is the FAH 18 B2 waterproof?

No, it is not waterproof. Avoid using the hedge trimmer in rain or wet conditions. Store it in a dry place and never immerse in water.

What safety features does the hedge trimmer have?

It features a two-hand operation for safety, requiring both hands on the handles to start. It also includes a hand guard and a blade cover for storage.

How do I clean the hedge trimmer?

After use, wipe the housing with a damp cloth. Clean the blades with a brush or cloth to remove sap and debris. Do not use water or solvents. Apply oil to the blades.

What is the maximum branch thickness it can cut?

The FAH 18 B2 can cut branches up to 18 mm in diameter. For thicker branches, use pruning shears or a saw.

How do I store the hedge trimmer for winter?

Clean and oil the blades, remove the battery, and store in a dry, frost-free place. Use the blade cover to protect the cutting edges. Store the battery separately at around 50% charge.

USER MANUAL FAH 18 B2 FLORABEST

Cordless Hedge Trimmer FAH 18 B2

GB

CORDLESS HEDGE TRIMMER

Translation of original operation manual

CZ

AKUMULÁTOROVÉ NŮŽKY NA ŽIVÉ PLOTY

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

HU

GB Translation of original operation manual Page 5

General Description ......6

Scope of delivery 6

Overview 6

Function Description 6

Technical Data 6

Notes on Safety 7

Symbols 7

General safety instructions for power tools 8

Special Safety Directions 10

Charging the battery .....13

Removing / inserting the battery ..... 13

Recharging the battery.... 13

Used batteries ....14

Operating 14

Switching On and Off 14

Checking the battery charge level .... 14

Working with the Hedge Trimmer ..... 15

Cutting Techniques 15

Cleaning and Maintenance .....15

Cleaning 16

Maintenance 16

Storage 16

Waste Disposal and Environmental

Protection 16

Spare Parts ......17

Trouble Shooting 18

Guarantee 19

Repair Service ....20

Service-Center 20

Service Branch 20

Translation of the original EC declaration of conformity .....87

Exploded Diagram ......89

Introduction

Congratulations on the purchase of your new device. With it, you have chosen a high quality product.

The operating instructions constitute part of this product. They contain important information on safety, use and disposal.

Before using the product, familiarise yourself with all of the operating and safety instructions. Use the product only as described and for the applications specified.

Keep this manual safely and in the event that the product is passed on, hand over all documents to the third party.

Intended Use

The equipment is specified for use only for the cutting and trimming of hedges, bushes and ornamental shrubs in the domestic environment. Any other use that is not explicitly approved in these instructions may result in damage to the equipment and represent a serious danger to the user.

The equipment is designed for use by adults. Adolescents over the age of 16 may use the device only under supervision.

Do not use the hedge trimmer in the rain or on wet hedges.

The operator or user is responsible for accidents or damage to other people or their property.

The manufacturer is not liable for damages caused by unspecified use or incorrect operation.

Before use, check that the blades are sharp. Ensure that the blades are sharpened whenever blunt, in

order to avoid overstressing of the machine. Damages caused by cutting with blunt blades are not covered by the guarantee.

General Description

See the front fold-out page for illustrations.

Scope of delivery

Carefully unpack the trimmer and check that it is complete:

• Cordless hedge trimmer
• Knife guard
• Battery
• Battery charger

Overview

1 Strike guard

Safety knife bar

3 Hand protection
4 Safety switch
5 Front handle
6 Ventilation slots
7 On/Off switch
8 Rear handle
9 Battery
10 Battery release buttons
11 Battery charge state indicator
12 Battery charger
13 Knife guard

14 Guide track

15 Button

Function Description

The cordless hedge trimmer features a laser-cut knife of special-grade steel. When trimming, the cutting teeth move to and fro in a linear shearing motion. The strike guard at the tip of the knife prevents unpleasant kickback reactions when hitting walls, fences, etc. Operators are protected by the appliance's two-hand safety switch and quick-stop brake function. The hand protection guards your hands against twigs and branches.

Read the sections below to learn more about each operating element's function.

Technical Data

Appliance

Motor voltage 18 V=

Idling speed 1300 min ^1 (rpm)

Runtime max. 50 min*

Cutting length 520 mm

Cutting capacity.... 15 mm

Weight (without battery charger) ..2.7 kg Sound pressure level

(L_pA) 77.5 dB(A), K_pA = 3 dB(A)

Sound power level ( L_wA ) guaranteed 93 dB(A)

measured ... 91 dB(A); K_wA = 2.09 dB(A)

Vibration (a_n)

Rear handle....0.970 m/s ^2

Front handle 1.964 m/s²

K = 1.5 ~m / s^2

Battery (Li-Ion)

Nominal voltage 18 V=

Capacity 1.3 Ah

Charging time .... approx. 5 h

Recharger ....JLH082100350G

Nominal consumption .....12 W

Voltage input ...... 100-240V\~50/60Hz

Voltage output 21V=350mA

Protection class....□ II

Protection category IP20

* The actual runtime under load of a fully charged battery depends on how you work and on the load put on the trimmer during operation.

Noise and vibration values have been determined according to the standards and regulations mentioned in the declaration of conformity.

Technical and optical changes may be undertaken in the course of further development without notice. All dimensions, references and information in this instruction manual are therefore not guaranteed. Legal claims made on the basis of the instruction manual can therefore not be considered as valid.

The stated vibration emission value was measured in accordance with a standard testing procedure and may be used to compare one power tool to another.

The stated vibration emission value may also be used for a preliminary exposure assessment.

Warning:

vibration emission value may differ during actual use of the power tool from the stated value depending on the manner in which the power tool is used.

Safety precautions aimed at protecting the user should be based on estimated exposure under actual usage conditions (all parts of the operating cycle are to be considered, including, for example, times during which the power tool is turned off and times when the tool is turned on but is running idle).

Notes on Safety

This section details the basic safety instructions for working with the appliance.

Symbols

Symbols in the manual

Warning symbols with information on damage and injury prevention.

Instruction symbols (the instruction is explained at the place of the exclamation mark) with information on preventing damage.

Help symbols with information on improving tool handling.

Symbols on the Equipment

Caution!

Read through the instruction manual carefully.

Wear eye and ear protection.

Do not use the hedge trimmer in the rain or on wet hedges.

Information of the acoustic power level L_WA in dB.

Machines are not to be place with domestic waste.

Cutting length

Cutting capacity

Symbols on the battery

Do not dispose of batteries in household waste, fire or water.

Do not subject the battery to strong sunlight over long periods and do not leave it on a heater (max. 60°C).

Take batteries to an old battery collection point where they will be recycled in an environmentally friendly manner.

Symbols on the recharger

WARNING!

Before using for the first time, carefully read through the user manual

The recharger is for indoor use only.

Protective temperature limiter

Protection class II

Electrical appliances must not be disposed of with the domestic waste.

General safety instructions for power tools

WARNING! Read all safety directions and instructions. Omissions in the compliance with safety directions and instructions can cause electrical shock, fire and/or severe injuries.

Retain all safety directions and instructions for future use.

The term „power tool“ in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1) WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2) ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
  • Do not abuse the cord. Never

use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3) PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention white operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4) POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjust -ments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate

GB

the power tool. Power tools are dangerous in the hands of untrained users.

- Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

- Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

- Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5) CAREFUL HANDLING AND USE OF BATTERY DEVICES

a) Charge the batteries only in chargers that are recommended by the manufacturer. Risk of fire if a charger that is suitable for a specific type of battery is used with other batteries.

b) In the power tools, use only the batteries designed for the purpose. The use of other batteries may result in injuries and risk of fire.

c) Keep the unused battery away from paper clips, coins, keys, nails, screws and other small metal objects, which could cause bridging of the contacts. A short circuit between the battery contacts may cause burns or fire.

d) If used incorrectly, liquid may leak from the battery. Avoid contact with

this. In the event of accidental contact, rinse off with water. If the liquid gets into eyes, seek medical assistance. Leaking battery fluid may cause skin irritations or burns.

6) SERVICE

- Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Special Safety Directions

1) SPECIAL SAFETY DIRECTIONS FOR HEDGE TRIMMERS

- Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Make sure the switch is off when clearing jammed material. A moment of inattention while operating the hedge trimmer may result in serious personal injury.

- Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or storing the hedge trimmer always fit the cutting device cover. Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades.

- Hold the power tool only on the insulated handle surfaces, as the cutting blade may come into contact with concealed power cables. Contact between the cutting blade and a live cable may render metallic components live and result in an electric shock.

- Keep cable away from cutting area. During operation the cable may be hidden in shrubs and can be accidentally

cut by the blade.

• Before the work, search the hedge for concealed objects, e.g. cable etc.
• Hold the hedge trimmer correctly, e.g. with both hands on the handles, if there are two handles. Loss of control of the equipment may result in injuries.
• Wear suitable clothing and work clothes when working with the equipment. Do not hold the equipment by the cutting blade or lift it on the cutting blade. Contact with the cutting blade can cause injuries.

2) FURTHER SAFETY DIRECTIONS

For your personal safety:

ar suitable work clothes such

as boots with non-slip soles, sturdy long trousers, gloves and goggles.

Do not wear long flowing clothing

or jewellery, as this may be caught by moving parts. Do not use this tool while walking barefooted or while wearing open sandals.

a) Do not use the hedge trimmer in the rain.
b) The appliance is designed for trimming hedges. Do not use to cut twigs, hard wood or other objects.
c) Do not attempt to dislodge a blocked/trapped blade before switching the tool off.
d) Before commencing with the trimming check the hedge for hidden objects such as wire etc.
e) When operating the appliance, always hold it well with both hands and at some distance away from your body.
f) Do not use the tool in the vicinity of flammable liquids or gasses. Fire- and

explosion risk exist in the event of a short circuit.

g) The blades have to be checked for wear in regular intervals and re-sharpened. Blunt blades will overload the machine. Resulting damages are not covered by warranty.

h) Do not attempt to repair the tool yourself, unless you are schooled in this field. All works, which are not described in this manual, may only be performed by our Service-Centre.

3) SPECIAL SAFETY DIRECTIONS FOR BATTERY-OPERATED TOOLS

a) Ensure that the device is switched off before inserting the battery. Inserting a battery into a power tool that is switched on may result in accidents.
b) Recharge the batteries indoors only because the battery charger is designed for indoor use only.
c) To reduce the electric shock hazard, unplug the battery charger from the mains before cleaning the charger.
d) Do not subject the battery to strong sunlight over long periods and do not leave it on a heater. Heat damages the battery and there is a risk of explosion.
e) Allow a hot battery to cool before charging.
f) Do not open up the battery and avoid mechanical damage to the battery. Risk of short circuit and fumes may be emitted that irritate the respiratory tract. Ensure fresh air and seek medical assistance in the event of discomfort.
g) Do not use non-rechargeable batteries!
4) CORRECT HANDLING OF THE BAT-

TERY CHARGER

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

- To charge the battery, use only the charger supplied. Risk of fire and explosion. This ensures that the safety of the device is maintained.

- Before each use, check the charger, cable and plug and have them repaired by qualified professionals and only with original parts. Do not use a defective charger and do not open it up yourself. This ensures that the safety of the device is maintained.

- Connect the charger only to a socket with an earth. Ensure that the mains voltage matches the specifications on the charger rating plate. Risk of electric shock.

- Disconnect the charger from the mains before closing or opening connection to the battery / power tool / device.

- Keep the charger clean and away from wet and rain. Do not use the charger outdoors. Dirt and the entry of water increase the risk of electric shock.

- Operate the charger only with the appropriate original batteries. Charging other batteries may result in injuries and risk of fire.

- Avoid mechanical damage to the charger. This can result in internal short circuits.

- Do not operate the charger on a combustible surface (e.g. paper, textiles). Risk of fire due to heating during charging.

- If the power cable for this equipment is damaged, it must be replaced by the manufacturer, a customer service agent of the same or a similarly qualified person in order to prevent hazards.

- The battery of the appliance is not fully charged at the time of delivery. It therefore needs to be fully recharged before you use it for the first time. For the first recharge cycle we recommend that you charge the battery for about 5 hour. Slot the battery into the base and plug the battery charger into a mains outlet.

- When the battery is fully charged, unplug the charger from the mains and from the appliance. Charging time is approx. 5 hour.

- Do not charge the battery continuously since this may damage the battery cells. Note: Repeatedly charging small capacities may damage the battery cells. Recharge the battery only if the appliance is becoming slow.

5) RESIDUAL RISKS

Even if properly operating and handling this electric tool, some residual risks will remain. Due to its construction and build, this electric tool may present the following hazards:

a) Cuts b) Ear damage if working without ear protection.

c) Damage to your health caused by swinging your hands and arms when operating the appliance for longer periods of time or if the unit is not held or maintained properly.

Warning! During operation, this electric tool generates an electromagnetic field which, under certain circumstances, may impair the functionality of active or passive medical implants. To reduce the risk of serious or lethal injuries, we recommend that persons with medical implants consult their doctor and the manufacturer of their medical implant before operating the machine.

Charging the battery

Do not expose the battery to extreme conditions such as heat or impact. Risk of injury from escaping electrolytic solution! After eye/skin contact, rinse the affected areas with water or a neutraliser and consult a doctor.

Charge the battery in a dry room only.

Prior to attaching the charger, check that the battery's outer surface is clean and dry. There is a risk of injury due to electric shock.

Only use the original charger from the package to charge the battery. Mind not to charge the appliance for more than 5 hours at a time. If you do, the battery and the appliance may be damaged and longer charging times would be a waste of energy. Excessive charging will void the warranty.

- Charge the battery before the first time of use. Do not briefly charge the battery several time in a row.

• Recharge the battery when you notice that the appliance is becoming slower.
• If a fully recharged battery lasts for considerably shorter operating times, the battery is used up and needs to be replaced. Only use an OEM spare battery available from our Customer Service.
• Always take heed of the applicable safety instructions as well as the environmental protection regulations and information.
• The warranty excludes all defects caused by improper handling.

Removing / inserting the battery

1. To remove the battery (9) from the appliance, press the release button (10) on the battery and pull out the battery.

2. To insert the battery (9), place it on the guide track (14) and push it back into the appliance. It will audibly snap in.

Recharging the battery

Recharge the battery when the last charge state indicator LED (E 11) changes from green to orange/red.

When starting to charge and while charging, the battery charge indicator (A 12) lights up red.

When charging is over, the light changes to green.

1. Remove the battery (9) from the appliance, as necessary.

2. Inser the battery (9) in the charging compartment of the battery charger (12). It will audibly snap in.

3. Plug the battery charger (12) into a mains outlet.

GB

1. When the battery is fully re-charged unplug the battery charger (12) from the mains.

2. Press the release button (A 10) on the battery (9) and pull the battery out of the battery charger (12).

Used batteries

• If a fully recharged battery lasts for considerably shorter operating times, the battery is used up and needs to be replaced. Only use an OEM battery pack replacement available from our Customer Service.
• Always take heed of the applicable safety instructions as well as the environmental protection regulations and information (see "Waste Disposal and Environmental Protection").

Operating

Wear suitable clothing and work gloves when working with the equipment. Ensure that the equipment is functional before each use. The On/Off switch and the safety switch must not be held closed. They must switch off the motor when on is released. Should a switch be damaged, stop working with the equipment. Ensure that the mains voltage value matches the label on the equipment.

Reduce the risk of injuries and accidents by wearing personal protection equipment and ensuring that the unit is fully functional.

A fter turning off the appli- ance, the blades will keep moving for some time. Al- low the blades to come to a standstill. Neither touch nor slow down the moving blades. Risk of injury!

Note noise protection and local specifications.

Switching On and Off

Ensure that you are standing in a firm position with both hands gripping the hedge trimmer away from the body. Ensure that the trimmer is in contact with no other objects before switching on.

D

Turning on:

1. Before turning on the unit, remove the knife guard (A 13).
2. Check that the battery (9) is in (see "Removing/inserting the battery").
3. Press the safety switch (4) at the front handle (5).
4. Press the On/Off switch (7). The hedge trimmer will run at top speed.

T urning off:

1. Release the safety switch (4) or the On/Off switch s (7).

Checking the battery charge level

The battery's (9) charge level is indicated by the charge state indicator (11).

Press the button (15) on the battery

(9).

The LEDs indicate the battery's charge level.

When starting to charge and while charging, the battery charge indicator (12) lights up red.

Working with the Hedge Trimmer

During cutting work, ensure that no contact is made with objects, e.g. such as wire fencing or main plant stems. This may result in damage to the cutter bar.

• Switch off the equipment immediately in the event that the blades are blocked by solid objects, pull out the power plug then remove the object.
• Avoid overstraining the equipment during work.

Cutting Techniques

• Cut thick branches beforehand using a branch clippers.
• The double-sided cutter bar enables cutting in both directions or, with a swinging action, from one side to the other.
• In case of vertical cutting, move the hedge trimmer uniformly forward or up and down in an arc movement.
• In case of horizontal cutting, move the hedge trimmer in a sickle-shaped movement to the edge of the hedge, so that cut branches fall to the ground.
• In order to achieve long straight lines, the placing of tensioned guiding cords is recommended.

Cutting Shaped Hedges:

Abstract dark textured shape with no visible text or symbols

It is recommended that hedges be cut in a trapezoidal shape, in order to prevent stripping off of the lower branches. This corresponds to the natural plant growth

and allows the hedge to thrive optimally. During cutting, only the new annual growths are reduced and thus a dense branching and a good screen will develop.

• Cut the sides of a hedge first. To do this, move the hedge trimmer in the direction of growth from bottom to top. If you cut down from the top, the thinner branches will move out, which may result in some areas having sparse growth or holes.
• Cut the top edge, according to taste, in a flat shape, roof shape or rounded shape
• Trim young plants to the required shape. The main growth should remain undamaged until the hedge has reached the planned height. All other shoots are lopped off to half size.

Care of Free-Growing Hedges:

Free-growing hedges are not shaped when cut, although they must be regularly maintained so the hedge does not become too high.

Cleaning and Maintenance

Repair and servicing work not described in this manual should always be carried by our Service Centre. Use only original parts.

GB

Turn off the appliance and, before doing any servicing, remove the battery.

Wear gloves when handling the safety knife bar. This will protect you against cuts.

The following cleaning and servicing should be done regularly. This will ensure a long and reliable service life.

Cleaning

Do not spray the appliance with water and do not immerse it in water. Electric shock hazard!

- Keep clean the ventilation slots, motor housing and handles of the appliance. Use a damp cloth or a brush.

Do not use cleaning agents or solvents. You may otherwise irreparably damage the appliance.

• Always keep the equipment clean. After using the equipment, it is imperative to:

- Clean the blade (with an oily cloth);

- Oil the blade shaft with an oil can or spray.

Simple line drawing of a tool interacting with a grid-like pattern (no text or symbols)

Maintenance

- Prior to every use, check the appliance for obvious defects such as loose, worn or damaged parts. Check that the screws in the safety knife bar (A 2) are tight.

- Check covers and safety devices (see A) for damages and correct installation. Replace as necessary.

• You can smoothen minor nudges in the cutting teeth yourself using a knife grinder to sharpen the cutting edges. The trimmer will only cut well if the teeth are sharp.
• Blunt, bent or damaged knife bars to be replaced.

Storage

• Keep the appliance in the knife guard (A 15) from the package and make sure it is kept dry and out of the reach of children.
• In order to keep the battery well charged, avoid exposing the appliance to extreme heat or cold in storage.
• Remove the battery before storing the unit for longer periods of time.

Waste Disposal and Environmental Protection

Remove the battery from the device and take the device, battery, accessories and packaging for environmentally friendly recycling.

Machines do not belong with domestic waste.

Do not dispose of batteries in household waste, fire (risk of explosion) or water. Damaged batteries may damage the environment and your health if toxic fumes or liquids leak out.

- Return the unit to a recycling centre. The plastics and metals in the unit can be sorted and appropriately recycled. Ask our Service Centre for details.

• Dispose of batteries in discharged condition. We recommend covering the pole with adhesive tape to prevent a short circuit. Do not open up the battery.
• Dispose of batteries in accordance with the local regulations. Take batteries to an old battery collection point where they will be recycled in an environmentally friendly manner. For information about this, ask your local waste management company or our service centre.
• Throw the cut grass on the compost. Do not throw it in the normal household waste.

Spare Parts

The following spares are available from Service-Center. Please indicate the machine type and the number of the spare part with your order.

Battery charger 91100552

Battery, 18 V 91100553

If further spare parts should be necessary, please find the part number on the exploded drawing.

Trouble Shooting

Problem Possible cause Corrective action
Appliance won't start	Battery (9) discharged Recharge battery (see „Charging")
	Battery (9) not inserted Insert battery (see „Operation")
	Safety switch (4) not pressed properly	Turn on (see "Operation")
	On/Off switch (7) defective	Send in to Service Centre for repair
Intermittent operation	Internal loose contact	Send in to Service Centre for repair
	On/Off switch (7) defective
Blades become hot	Blades (2) are blunt	Have the blades sharpened or replaced (Service Centre)
	Blades (2) are notched	Have the blades checked or replaced (Service Centre)
	Too much friction due to lack of lubrication	Oil the blades
Bad trim	Too much friction due to missing lubrication	Lubricate knife bar
	Knife bar (2) dirty Clean knife bar
	Knife bar (2) blunt	Grind or have knife bar replaced (Service Centre)
	Bad cutting technique See ("Working with the hedge trimmer")
	Battery not fully charged Recharge battery (see "Charging")

Guarantee

Dear Customer,

This equipment is provided with a 3-year guarantee from the date of purchase.

In case of defects, you have statutory rights against the seller of the product. These statutory rights are not restricted by our guarantee presented below.

Terms of Guarantee

The term of the guarantee begins on the date of purchase. Please retain the original receipt. This document is required as proof of purchase.

If a material or manufacturing defect occurs within three years of the date of purchase of this product, we will repair or replace – at our choice – the product for you free of charge. This guarantee requires the defective equipment and proof of purchase to be presented within the three-year period with a brief written description of what constitutes the defect and when it occurred.

If the defect is covered by our guarantee, you will receive either the repaired product or a new product. No new guarantee period begins on repair or replacement of the product.

Guarantee Period and Statutory Claims for Defects

The guarantee period is not extended by the guarantee service. This also applies for replaced or repaired parts. Any damages and defects already present at the time of purchase must be reported immediately after unpacking. Repairs arising after expiry of the guarantee period are chargeable.

Guarantee Cover

The equipment has been carefully produced in accordance with strict quality guidelines and conscientiously checked prior to delivery.

The guarantee applies for all material and manufacturing defects. This guarantee does not extend to cover product parts that are subject to normal wear and may therefore be considered as wearing parts (e.g. knives, battery and gear wheel) or to cover damage to breakable parts (e.g. switches, batteries, or parts made of glass).

This guarantee shall be invalid if the product has been damaged, used incorrectly or not maintained. Precise adherence to all of the instructions specified in the operating manual is required for proper use of the product. Intended uses and actions against which the operating manual advises or warns must be categorically avoided.

The product is designed only for private and not commercial use. The guarantee will be invalidated in case of misuse or improper handling, use of force, or interventions not undertaken by our authorised service branch.

Processing in Case of Guarantee

To ensure quick handling of you issue, please follow the following directions:

• Please have the receipt and item number (e.g. IAN 12345) ready as proof of purchase for all enquiries.
• Please find the item number on the rating plate, an engraved plate on the front page of your manual (bottom left) or as a sticker on the back or bottom.
• Should functional errors or other defects occur, please initially contact the service department specified below by telephone or by e-mail. You will then receive further information on the processing of your complaint.

GB

- After consultation with our customer service, a product recorded as defective can be sent postage paid to the service address communicated to you, with the proof of purchase (receipt) and specification of what constitutes the defect and when it occurred. In order to avoid acceptance problems and additional costs, please be sure to use only the address communicated to you. Ensure that the consignment is not sent carriage forward or by bulky goods, express or other special freight. Please send the equipment inc. all accessories supplied at the time of purchase and ensure adequate, safe transport packaging.

Repair Service

For a charge, repairs not covered by the guarantee can be carried out by our service branch, which will be happy to issue a cost estimate for you.

We can handle only equipment that has been sent with adequate packaging and postage.

Attention: Please send your equipment to our service branch in clean condition and with an indication of the defect.

Equipment sent carriage forward or by bulky goods, express or other special freight will not be accepted.

We will dispose of your defective devices free of charge when you send them to us.

Service-Center

Service Great Britain

Tel.: [phone]

(£ 0.10/Min.)

E-Mail: [e-mail]

IAN 70380

Service Branch

Please note that the following address is not a service address. Please initially contact the service centre specified above.

DES UK Ltd.

Unit B7

Oxford Street Industrial Park

Vulcan Road

Bilston, West Midlands WV14 7LF

Sadržaj

Előjáték ......21

Abstract dark textured shape with no visible text or symbols

Simple line drawing of a tool interacting with a grid-like pattern (no text or symbols)

Karbantartás

Abstract grayscale texture with no discernible text or symbols

Simple line drawing of a tool interacting with a grid-like structure (no text or symbols)

Údržba

Abstract dark textured shape with a vertical dimension line (no text or symbols)

Simple line drawing of a tool interacting with a grid-like pattern (no text or symbols)

Údržba

Abstract grayscale texture with no visible text, symbols, or identifiable objects

Simple line drawing of a tool interacting with a grid of pins (no text or symbols)

Wartung