FR-291 - Fridge DAEWOO - Free user manual and instructions

USER MANUAL FR-291 DAEWOO

: In this Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service Information Center

1. SPECIFICATION

1. MAJOR ACCESSORIES

NAME Q'TY
FREEZER ROOM	ICING CASE 1
	FREEZER SHELF 1
	FREEZER POCKET 2
REFRIGERATOR ROOM	REF. SHELF 2
	COVER VEGETB CASE 1
	VEGETABLE CASE 1
	EGG CASE 1
	EGG POCKET 1
	UTILITY POCKET 1
	JUMBO POCKET 1
	BOTTLE POCKET	1

2. QUALITY SPECIFICATION

CLASIFICATION	CONTENTS		FR-291
CAPACITY (L)	GROSS	FREEZER	73L
		REFRIGERATOR	173L
		TOTAL	246L
	STORAGE	FREEZER	62L
		REFRIGERATOR	159L
		TOTAL	221L
EXTERNAL DIMENSION	WIDTH		545
	DEPTH		584
	HEIGHT		1620
COOLING & CONTROL SYSTEM	DEFROST SYSTEM		FORCED
	DEFROST CONTROL		AUTOMATIC START & STOP
	COMPRESSOR		YX58LHP5
	REFRIGERANT(g)		R-134a, 75 g
	REFRIGERATOR DEGREE		***
ELECTRIC CHARACTER	INPUT VOLTAGE		220~240V
	COMPRESSOR		0.6A
	HEATER		190W
	ELECTRIC CONSUMPTION		390 KWh/Year
WEIGHT			53 Kg

2. NAME OF FARTS

CASE ICING F SHELF F TEMP. CONTROL DIAL R TEMP. CONTROL DIAL WINDOW R SHELF COVER VECETB CASE VEGETB CASE R POCKET EGG POCKET ECG CASE UTILITY POCKET JUMBO POCKET BOTTLE POCKET

3. AIR FLOW DIAGRAM

F POCKET 19°C -19°C 19°C 19°C 5~6°C 2~4°C 3~6°C 2~4°C 2~4°C 3~6°C 2~4°C 3~6°C 4~7°C R POCKET REFRIGERATOR ROOM VEGETB CASE

4. REFRIGERANT CYCLE DIAGRAM

graph TD
    A["PIPE HOT"] --> B["PIPE *S PLT"]
    B --> C["EVA"]
    C --> D["PIPE SUC."]
    D --> E["COMP"]
    E --> F["PIPE CON(SUC)"]
    F --> G["PIPE CON(DEL)"]
    G --> H["CHARGE PIPE"]
    H --> I["CAPE-TUBE"]
    I --> J["DRYER AS"]
    J --> K["COMPRESSOR"]
    K --> L["PIPE CONN DEL"]
    L --> M["PIPE *S PLT"]
    M --> N["PIPE HOT"]
    N --> O["DRYER AS"]
    O --> P["CAPE-TUBE"]
    P --> Q["PIPE CONN SUC."]
    Q --> R["PIPE SUC"]
    R --> S["EVAPORATOR"]

5. MACHINE ROOM VIEW AND PART LIST

Technical diagram of a vehicle interior with numbered components for identification

NO	PART NAME	PART CODE	Q'TY	MATERIAL	SPEC.	REMARKS
1	BASE COMP SAS	3010342100	1	O1, T1.0
2	ABSORGLR COMP	3010103400	4	NR	H=40
3	COMPRESSOR	3956146740	1	JX46LCP4		----
4	SPECIAL WASHER	4019H09030	2	SK-5 T0.8
5	SWITCH P-RELAY AS	3018128900	1
6	CLAMP BAND RELAY	3816100110	1	SK-5 T0.7	T0.7 7N-3-A
7	COVER RELAY	3811400503	1
8	PIPE CONN DEL	3014417910	1	DCUT1-O	4.76 × 10.7 × 1.200
9	PIPE HOT	3014462900	1	TSW	4 × 10.5 × 16434
10	PIPE *S PLT	3014462700	1	TSW	4.76 × 10.7 × 15914
11	PIPE SUC AS	3014463000	1	—
12	DRYER AS	3016808200	1	XH-9	10g
13	PIPE CONN SUC	3014417910	1	DCUT1-O	6.0 × 10.5 × 1373
14	CORD POWER AS	3011347000	1		CP-2PIN
15	SCREW TAPPING	7112401211	2	MFZN	TITRS 4x12
16	SCREW MACHINE	7002401065	1	BSNI	TRS 4x10
17	WASHER TOOTHED	7402204011	1	MFZN	TE-B-4
18	CASE VAPORI	3011187400	1	PP
19	PIPE SERVICE	4019L02020	1	DCUT1-O
20	HOSE DRN A	3013225100	1	PP
21	CAP DRN HOSE B	3010928000	1	NBR
22	COVER HOUSING	3001400400	1	PP

6. WIRE DIAGRAM & SOLID WIRE DIAGRAM

1) WIRE DIAGRAM

graph TD
    A["BLU"] --> B["FUSE TEMP."]
    B --> C["BLU"]
    C --> D["SKY BLU"]
    D --> E["SKY BLU"]
    E --> F["SLC"]
    F --> G["R/C"]
    G --> H["P-RELAY"]
    H --> I["PTC 2 OL"]
    I --> J["3"]
    J --> K["BLU"]
    K --> L["BRN BI-METAL"]
    L --> M["BRN"]
    M --> N["COMPRESSOR"]
    N --> O["RED"]
    O --> P["WHT BLU"]
    P --> Q["Timer DEFROST RED"]
    Q --> R["WHT BLU"]
    R --> S["BRN"]
    S --> T["SWITCH DR"]
    T --> U["HTR C/BOX"]
    U --> V["LAMP"]
    V --> W["YEL"]
    W --> X["BLU"]
    X --> Y["GRN/YEL"]
    Y --> Z["PLUG POWER"]
    Z --> AA["BRN"]
    AA --> AB["BRN"]
    AB --> AC["SWITCH DR"]
    AC --> AD["HTR-THERMO"]
    AD --> AE["THERMOSTAT"]
    AE --> AF["BRN SKY BLU"]
    AF --> AG["BRN SKY BLU"]

2) SOLID WIRE DIAGRAM

graph TD
    A["Red"] --> B["F/W"]
    B --> C["YEL"]
    C --> D["SKY BLU"]
    D --> E["BI-METAL BRN"]
    E --> F["BRN"]
    F --> G["WHT"]
    G --> H["HTR DEFROST"]
    H --> I["BLU"]
    I --> J["BLU FUSE TEMP. BLU"]
    J --> K["SWITCH DR"]
    K --> L["YEL"]
    L --> M["BLU"]
    M --> N["HTR C/BOX BRN"]
    N --> O["THERMOSTAT YEL"]
    O --> P["SKY BLU"]
    P --> Q["WHT BLU"]
    Q --> R["LAMP BLU"]
    R --> S["YEL"]
    S --> T["WHT"]
    T --> U["TIMER DEFROST BRN"]
    U --> V["WHT BLU"]
    V --> W["P-RELAY"]
    W --> X["RED"]
    X --> Y["QL"]
    Y --> Z["PTC"]
    Z --> AA["YEL"]
    AA --> AB["SKY BLU"]
    AB --> AC["PLUG POWER"]
    AC --> AD["BRN"]
    AD --> AE["GRN/YEL"]

7. MAIN COMPONENTS

1. COMPRESSOR

FR - 291
MODEL	YX58LHP5
STARTING TYPE RSCR
VOLTAGE 230V / 50Hz
MAIN COIL RESISTANCE	19.4Ω
SUB COIL RESISTANCE	25.6Ω

1. RELAY

FR - 291
MODEL		4TM129SHBYY-52
PTC	RESISTANCE	33Ω
	MAX. VOLTAGE	355V
	MAX. CURRENT	6A
OL CURRENT 3.5A

1. RUNNING CAPACITOR

FR - 291
VOLTAGE	AC
RATED CAPACITY	4 μF

400V

1. LAMP

FR - 291
VOLTAGE	AC 240V / 15W

5. POWER CORD

FR-291
TYPE	3x0.75 mm^2
LENGTH	1.80m

6. TEMPERATURE FUSE

FR - 291
VOLTAGE	250V
CURRENT	10A
WORKING TEMP.	77 °C

7. Bi-METAL

FR - 291
MODEL PST - 3
OFF TEMP.	12 ± 3

7. DEFROST TIMER

FR - 291
MOEDL	CF-3001-21
CYCLE TIME 12 HR	± 10.8 MIN

8. DEFROST HEATER

FR - 291
RATING AC 230V / 190W
RESISTANCE	269 Ω

1. FAN MOTOR

FR - 291
MODEL	DAI-6122-DESFD
TYPE	SHADED
RATING	230V/50HZ
INPUT	5.0W
POLE	2
RPM 2000 ± 150 rpm

POLE

POLE

1. R-THERMOSTAT

FR - 291
MODEL	GNF-175D-01F(1)
RATING	AC 25
ON/OFF TEMP.	2.5 ± 2.5 °C

250V/60Hz

1. DOOR SWITCH

FR - 291
TYPE 1 BUTTON 2 PIN
RATING	AC 2
MODEL	WDS

250V/0.5A

001C-01

1. CONTL BOX HEATER

FR - 291
RATING AC 220V / 4W
RESISTANCE	12100 Ω

F ROOM

R ROOM

56 67 OPTION

Exploded view diagram of a refrigerator with numbered parts for identification

58 30 40

MECH ROOM 55 56 57 58 59 60 15 61 52 51 54 62 63 64

NO	PART CODE	PART NAME	Q'TY	REAMRK
1 301	0815700 CABINET	URT AS 1
2 301	1755200 DOOR S/W AS 1 WDS001C-01
3 301	2924600 HINGE *T AS 1
4 301	6000301 SPECIAL BOLT 3 M5 x L14
5 300	1400000 COVER *T HI 1 PP
6 301	2924500 HINGE *M AS 1
7 301	6004000 SPECIAL BOLT 2 M6 x L10
8 301	2924700 HINGE *U AS 1
9 765	0602511 BOLT HEX 2 M6 x L25
10	3012105300 FOOT ADJ AS 2 PP+INSERT
11	3001400200 COVER FAN A 1 HIPS
12	3013412000 KNOB F CONTL 1 HIPS-c
13	4017Z42312 FAN 1 ABS ID3.17 ∅100
14	3001400600 COVER SCREW 2 HIPS
15	7112401211 SCREW TAPPING 4 T1TRS 4x12 MFZN
16	3018921800 LOUVER F 1 PP-c
17	3015917200 MOTOR F AS 1 230V/50Hz
18	3012024600 FIXTURE MOTOR A 1 PP
19	7122401211 SCREW TAPPING 2 T2TRS 4x12
20	3017062000 EVA SAS 1
21	3014120100 PAD EVA *L 1 F-PS
22	3014120200 PAD EVA *R 1 F-PS
23	3017202500 FUSE TEMP AS 1 105T,AC250V/10A
24	3018128700 SWITCH BIMETAL 1 PST-3SW-
25	4016N03280 CLAMP CABLE 3 NYLON-66, W3.6xL146
26	3012820200 HEATER SHEATH SAS 1 AC 220V, 175W
27	3010549100 BOX CONTL 1 HIPS
28	3013358100 INSU R DUCT *T 1 F-PS
29	3013358200 INSU R DUCT *U 1 F-PS
30	3018128310 SWITCH TIMER 1 220V/50Hz, 12HR
31	3018304900 THERMOSTAT 1
32	3013412100 KNOB R CONTL 1 HIPS
33	3017906700 SOCKET R LAMP AS 1 220V/15W
34	7112401011 SCREW TAPPING 2 T1TRS 4x10 MFZN
35	3015511000	WINDOW R	1	GPPS
36	3011187300	CASE ICING	1	PP
37	3017843700	SHELF F	1	GPPS
38	3017843600	SHELF R	2	GPPS
39 30	01400700 COVER VEGETB CASE 1 GPPS
40	3011187600	CASE VEGETB		1 GPPS
41	3019027900	POCKET F		2 GPPS
42 30	12319500 GASKET F DR AS 1 PVC-S+MAGNET
43	3011766900	DOOR F URT AS	1
44	3011187200	CASE EGG		1 PP
45	3019027800	POCKET EGG		1 GPPS
46	3019028200	POCKET UTILITY		1 GPPS
47	3019028000	POCKET JUMBO		1 GPPS
48	3019028100	POCKET R		1 GPPS
49 30	12319600 GASKET R DR AS 1 PVC-S+MAGNET
50	3011767000	DOOR R URT AS	1
51	3956158K50	COMPRESSOR	1	YX58LHP5
52	4019H09030	SPECIAL WASHER	2	SK-5, T0.8
53 30	10103400 ABSORBER WASHER 4 NR H=40
54 30	10342100 BASE COMP SAS 1 GI, T1.0
55	3001400400	COVER HOUSING		1 HIPS(n)
56	3016404700	CAPACITOR RUNNING		1 400VAC, 4 μF, CLASS C
57	3816100110	CLAMP BAND RELAY	1
58 30	18130300 SWITCH P RELAY AS 1 4TM 129SHBYY-52
59	3811400503	COVER RELAY		1 PP
60	3011348011	CORD POWER AS	1
61 30	13225100 HOSE DRN A 1 PP
62	3011187400	CASE VAPORI		1 PP
63 30	16808200 DRYER AS 1 XH-9, 10g
64	3016003300	SPECIAL BOLT		2 M6.5x20
65	7650601511	BOLT HEX		2 M6x15
66 30	17843500 SHELF CHILLED CASE 1 GPPS
67	3011112011	CASE CHILLED	1	GPPS

9. Methods of exchanging main parts.

1. F LOUVER PART

	- Remove the screw cap, and unscrew the fixing screw(2EA).
	- Pull the louver forward, grasping at the fan cover and upper corner of louver.
	- Disassemble fan motor harness and remove Louver As..
	- Unscrew the fixing screw at the back of louver(hidden under Al tape).- To remove the fan cover, pull the bottom of fan cover.

2. EVAPORATOR PART

	- Pull the suction pipe and capi. Tube forward, with care not to bend the pipes sharply.
	- Hold up evaporator and pull it forward.
	- Remove the evaporator pad.
	- To remove defrost heater, cut the clamp cable first, disassemble the harness then pull down the heater.- The assembling procedure of new heater is the reverse of disassemble steps.

Close-up of a hand inserting wires into a refrigerated appliance (no visible text or symbols)

- To exchange the Bi-Metal, first cut the clamp cable then disassemble the harness.

Close-up of hands installing a coiled electrical heating element in a refrigerated room (no visible text or symbols)

- Extract the Temp. Fuse in the evaporator then disassemble the harness.

- The new Temp. Fuse should be located in the same position in the evaporator.

3. CONTROL BOX PART

Hand inserting a plastic clip into a white refrigerator (no text or symbols visible)

- To remove the temperature control dail, Pull it down.

	- Unscrew the fixing screw(1EA).
	- Pull down the control box, then disassemble the harness.
	- Remove the lamp cover with screwdriver etc. pushing the front hooker part of the cover then lift up the cover.
	- Unscrew the fixing screw of the lamp socket.

Close-up of hands assembling or adjusting a small mechanical component on a white electronic device (no visible text or symbols)

• Pull the lamp forward, then disassemble the connector.
• The assembling procedure of new lamp is the reverse of disassemble steps.

4. DOOR SWITCH PART

Person installing a label on a wall-mounted fixture, showing a green card with handwritten text and a tool.

- In removing the door switch, push the door switch left, insert a pointed rods as screw-driver in the right gap, and push the rod left and pull the door switch forward.

- Be careful not to harm the surface of cabinet . (Use name plate etc. under the pointed rod)

Close-up of hands installing or connecting wires on a wall-mounted appliance (no visible text or symbols)

- Pull the door switch forward and remove the harness.

Hand inserting a small white component into a door handle (no text or symbols visible)

- In inserting new door switch, insert the left part of the switch in the hole then push the right part of refrigerator.