SM 3719 - Blender SEVERIN - Free user manual and instructions

USER MANUAL SM 3719 SEVERIN

Exterior view of a modern kitchen blender (no text or symbols visible)

GB Instructions for use Blender 8

Before using the appliance, please read the following instructions carefully and keep this manual for future reference. The appliance must only be used by persons familiar with these instructions.

Connection to the mains supply

Make sure that the supply voltage corresponds with the voltage marked on the rating label of the appliance. This product complies with all binding CE labelling directives.

Familiarisation

1. Feeder opening with stopper
2. Lid
3. Lid release
4. Blender jug with handle
5. Blade
6. Safety lock
7. Rotary control
8. Power cord with plug
9. Power cord storage (on underside of appliance)
10. Rating label (on underside of appliance)

Important safety instructions

- The appliance may only be used by persons with reduced physical, sensory or mental capabilities, or lacking experience and knowledge, if they have been given supervision or instruction concerning the use of the appliance and fully understand

all dangers and safety precautions involved.

• Children must not be permitted to operate the appliance. The appliance and its power cord must be kept well away from children.
• Children must not be permitted to play with the appliance.

- Caution: Keep any packaging materials well away from children – these materials are a potential source of danger, e.g. of suffocation.

- Before the appliance is used, the main body as well as any attachments should be checked thoroughly for any defects. If the appliance, for instance, has been dropped onto a hard surface, it must no longer be used: even invisible damage may have adverse effects on the operational safety of the appliance.

- The power cord should be regularly examined for any signs of damage. In the event of such damage being found, the appliance must no longer be used.

- The appliance should only be placed on a level surface. Do not allow the housing or its power cord to come into contact with open flames or any hot surfaces such as hot-plates.

- Do not let the power cord hang free.

- Do not leave the appliance unattended while connected. Always remove the plug from the wall socket, even if you leave the room only for a short while

- Caution: the blade is extremely sharp. To prevent injuries, take special care when cleaning the appliance and when emptying the blender jug.

• Do not touch any moving parts during operation - this can be extremely dangerous.
• Caution: do not put hot liquid into the blender jug.
• Always switch the appliance off and remove the plug from the wall socket,
• before opening the lid,
• before removing or fitting the blender jug,
• before cleaning,
• in case of any malfunction during use,
• after use.
• When removing the plug from the wall socket, never pull on the power cord; always grip the plug itself.
• Caution: Any misuse can cause severe personal injury.
• No responsibility will be accepted if damage results from improper use, or if these instructions are not complied with.
• This appliance is intended for domestic or similar applications, such as
• in shops, offices and other similar working environments,
• in agricultural working environments,
• by customers in hotels, motels etc. and similar establishments,
• in bed-and breakfast type environments.
• In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. The address can be found in the appendix to this manual.

Before using for the first time

Before the appliance is used for the first time, the blender jug and the lid should be thoroughly cleaned as described in the section General Care and Cleaning.

Switch settings

The following settings can be selected:

P The appliance remains switched on as long as the rotary switch is held in this position
0 The appliance is switched off
1 Low power
2 Maximum power

Short-term operation

The appliance is designed to process average domestic quantities of food; it can be operated without interruption for a maximum of 60 seconds, after which it should be allowed to cool down.

Safety switch

A special safety switch in the motor housing ensures that the appliance can only be operated once the blender jug and lid are properly locked in position.

Before removing the blender jug, make sure that the rotary control is in position 0. This also applies when fitting the blender jug to the motor housing. If the control is not in its off-position (0), the motor will start immediately.

Operation

- Fit the blender jug to the motor housing with its handle on the right and lock it by turning anti-clockwise until the lock symbol and arrow mark are properly aligned.

- Put the liquid ingredients into the blender jug. The jug has a maximum capacity of 1500 ml. To avoid possible foaming or spilling when processing foamable or thin liquids such as milk, do not fill the jug over the 1000 ml mark.

- Put the lid on and lock it by turning clockwise. To add ingredients during operation, the stopper in the centre of the lid can be removed by turning it in an anti-clockwise direction and then lifting it off. Do not put any objects into the blender jug while the appliance is operating.

- Insert the plug into the wall outlet and use the rotary control to select the required power setting.

- Caution: do not operate when the blender jug is empty. Do not fill it with dry items only, such as nuts, almonds etc.

- After using the blender, switch off and remove the plug from the wall socket. Wait until the motor has come to a complete standstill before removing the blender jug. To remove the jug, turn in the opposite direction from that described in the assembly instructions.

- To remove the lid, push and hold the lid release while turning the lid anticlockwise. The lid can now be taken off. Always wait until the motor has come to a complete standstill before taking the lid off.

Wind-up power cord storage

The power cord can be wound up for storage on the underside of the unit. Unwind it completely before operation.

General Care and Cleaning

- Always remove the plug from the wall socket before cleaning the appliance.

- To avoid the risk of electric shock, do not clean the motor housing or the power cord with water and do not immerse them in water. The motor housing may be wiped with a slightly damp, lint-free cloth.

- Do not use abrasives, harsh cleaning solutions or hard brushes for cleaning, and do not clean in a dish-washer.

- For cleaning after use, fill the blender jug with approximately 1000 ml warm water and a mild cleaning detergent. Let the appliance run for a short period as described in the section Operation. Then rinse the blender jug, lid and stopper with fresh water. All parts must me thoroughly dried afterwards.

Disposal

Devices marked with this symbol must be disposed of separately from your household waste, as they contain valuable materials

which can be recycled. Proper disposal protects the environment and human health. Your local authority or retailer can provide information on the matter.

Guarantee

This product is guaranteed against defects in materials and workmanship for a period of two years from the date of purchase. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse.

This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. This guarantee does not affect your statutory rights, nor any legal rights you may have as a consumer under applicable national legislation governing the purchase of goods. If the product fails to operate and needs to be returned, pack it carefully, enclosing your name and address and the reason for return. If within the guarantee period, please also provide the guarantee card and proof of purchase.

FR

Mixeur

Chère cliente, Cher client,

Compartimento enrollacable

Kuressaare: Toomas Teder FIE, Pikk 1B,

tel: [phone]

Philippos Business Center

Agias Anastasias & Laertou, Pilea

Service Post of Thermi

570 01 Thessaloniki, Greece

Tel.: [phone]

Iran

IRAN-SEVERIN KISH CO. LTD.

No. 668, 7th. Floor

Bahar Tower

Ave. South Bahar

TEHRAN - IRAN

Tel.:[phone]

Fax:[phone]

[e-mail]

www.iranseverin.com

Israel

Eatay Agencies

109 Herzel St.

Haifa

Phone: [phone]

Email: [e-mail]

Italia

via Dino Col 52r-54r-56r,

I - 16149 Genova

Green Number: 800240279

Tel.: [phone]

Fax: [phone]

e-mail: [e-mail]

Jordan

F.A. Kettaneh

P.O. Box 485

Amman, 11118, Jordan

Tel: [phone]

e-mail: [e-mail]

Korea

Jung Shin Electronics co., Ltd.

501, Megaventuretower 77-9,

Moonrae-Dong 3ga, Yongdeungpo-Gu

Seoul, Korea

Tel: [phone]\~7

Fax: [phone]

Service Hotline: [phone]

Latvia

SERVO Ltd.

Mr. Janis Pivovarenoks

Tel: [phone]

[e-mail]

Lebanon

Khoury Home

7th Floor, Cité Dora 3 Building, Dora

P.O.Box 70611

Antelias, Lebanon

Telephone [phone], Fax [phone]

eMail: [e-mail]

Internet: www.khouryhome.com

Luxembourg

Ser-Tec

Sc. 2 Et.1, Ap. 27, Sector 1

Bucuresti

Tel: [phone]

[phone]

[phone]

Fax: [phone]

[phone]

E-mail: offi [e-mail]

Web site: www.forbrands.ro

Schweiz

VB Handels Sàrl GmbH

Postfach 306

1040 Echallens

Tel: [phone]

Fax: [phone]

mail: [e-mail]

Serbia

SMIL doo

Pasiceva 28, Novi Sad

Serbia and Montenegro

tel: + 381-21-524-638

tel: [phone]

fax: [phone]

Slowak Republic

PREMT,s.r.o.

Skladová 1

917 01 Trnava

Tel: [phone]

Finland

Oy Harry Marcell Ab

Rälssitie 6, PL 63

01511 Vantaa

Tel.: 00358 / 2 07 599 860

Fax: 00358 / 2 07 599 803

Svenska

Rakspecialisten HS

Möllevångsgatan 34

214 20 Malmö

Tel.: [phone]

Fax: [phone]

Slovenia

SEVTIS d.o.o.

Smartinska 130

1000 Ljubljana

Tel: [phone]

Fax: [phone]

Stand: 03.2012