Findoo 36 - Camcorder dnt - Free user manual and instructions

USER MANUAL Findoo 36 dnt

Line drawing of an endoscopic medical device with a coiled tube and three inserted tubes (no text or symbols)

Inhalt

Three black electronic components with leads and pins, no visible text or symbols

Haken, Magnet, Spiegel USB-Kabel Video-Kabel

Line drawing of a portable device with a screwdriver and a label (no text or symbols)

Diagram showing a device with a labeled panel and directional arrows, possibly indicating movement or orientation.

Line drawing of a mechanical component with an arrow indicating direction (no text or symbols)

Diagram showing battery cell structure with arrows indicating assembly or transformation from left to right

Line drawing of a device with ports and connectors, no text or symbols present

Line drawing of a car interior showing dashboard and steering wheel (no text or symbols)

Betrieb

Betrieb

Line drawing of a hand pointing at a smartphone screen (no text or symbols)

ON OFF

Diagram of a device control panel with four buttons and directional arrows indicating input/output (no text or symbols)

Line drawing of a smartphone with an arrow pointing to it, showing no text or symbols on the device itself.

Language OK: ✓ English

Sprache auswählen:

Video system NTSC OK: ✓ NTSC PAL NTSC NTSC

Videoformat:

Abmessungen 100x70x25mm

Gewicht 140g

Temperaturbereich -10^ +50^/+14^ +122^

Security instructions ....19

delivery content 20

Appliance description

Appliance description 21

Getting started

Insert batteries ....22

Installing imager head cable ....22

Installing the accessories ....23

Charging the battery in the monitor 23

Mounting the monitor ....23

Operation

Hand grip 24

Monitor functions ......24

Recording Videos and Photos 25

Videos and Photos playback 26

Videos and Photos deleting .....28

Settings, Menu ....29

Connect the monitor to the computer ....31

Technical specification 32

Disposal of electrical and electronic equipment ....33

Service information ....33

Declaration of Conformity 33,66

Warranty regulations 67

Security instructions

Please read this information carefully before you use the product.

General instructions

• Don't place the unit on unstable location, if it falls down, people may be injured.
  ● The unit is not a toy, please beware of small children.
• If you connect the unit to other electronic devices, please study also the security instruction of this device.
• If you have any question regarding the unit, how it works, the safety or the correct connection please contact our technical support or ask any specialist.
  ● The seller will not be liable for any damages caused by misuse of the product and any claim from third parties.

Environmental conditions

• Don't drop or shake the unit, it might be damaged.
  ● Avoid too high pressure to the LC-display, it might be damaged.
• Don't leave the unit where the temperature is higher than 60^ , e.g. in cars with closed windows in the summertime, near heaters or any other type of heat source.
• Don't use the unit in rooms with high humidity e.g. bathrooms. Parts of the apparatus, tube and mini camera, are water proofed See technical specifications for details
• Don't use the unit at dusty places.

Technical problems

• In case any foreign material or liquid gets into the product, please immediately remove the power cord. Before you use it again, ask your authorised dealer to check the product carefully.
• Please do not hesitate to contact our service center.

Packaging material

- Please don't keep any packaging material within reach of small children. It can become a dangerous toy.

Maintenance

• Please remove the battery in case you don't use the product for a longer period of time. Leaking batteries can damage the product. Store the product at a clean and dry place.
• For cleaning use dry and soft cloth.

Delivery content

Interference by radio

● The apparatus operates on a frequency, which is also used by other devices, that transmits video by radio. In some cases this may cause interferences.

Delivery content

Hand grip 16mm Tube with mini camera TFT monitor

Three black electronic components with leads and pins, no visible text or symbols

Hook, Magnet, Mirror USB cable Video cable

CD Charger/Power supply for the monitor 4 x AA Batteries

Getting started

Appliance description
Hand grip

Tube connector Power-LED Monitoradaptor/ Videoutput On-Off/ LED brightness Tube mini camera with lighting

Monitor

Power indicator ON/OFF button USB Port TFT-Display Video Output microS card slot charging socket OK Up Menü Down

Reset Monitor holder/ Video input

Getting started

Insert Batteries

Diagram of a device with labeled parts and an arrow pointing to a component, possibly indicating a directional or process flow.

Insert the batteries into a battery box in the grip.

- Remove the screw using a screwdriver on the lower side of the grip.

Diagram showing a car with a parking sign and directional arrows, including a pencil symbol.

- Slide the cover in the direction of the arrow.

Line drawing of a mechanical component with an arrow indicating direction (no text or symbols)

- Remove the battery compartment.

Diagram showing battery cell structure with arrows indicating assembly or transformation from left to right

• Insert four new batteries(included) into the slots of the battery compartment. The proper orientation of the batteries is indicated on the compartment.
  ● Install the battery cap into place.

Always exchange a complete set of new batteries.

Installing the imager head cable

To use the Findoo the imager head cable must be connected to the hand grip. Be sure that the key and slot are properly aligned. Once they are aligned, finger tighten the knurled knob to hold the connection in place.

Key Slot

knurled knob

Getting started

Installing the accessory

The accessories consist of 3 parts, a mirror, a magnet and a hook, which are all attached to the imager head on the same way. The accessories have 2 mounting positions on the imager head.

close

Charging battery in the monitor

The monitor has a built-in Li-Ion battery. A fully charged battery is enough for approx. 2 hours.

Recharging the battery takes about 3 hours.

● During charging the power LED indicates red.
● The monitor can be used during charging.

Inspect the inspection camera before use and correct any problems to reduce the risk of serious injury from electric shock and other causes and prevents tool damage.

adapter

Mounting the monitor

The monitor can be operated wireless or fixed on the hand grip. On the rear side of the hand grip are 4 connectors and a fitting, where the monitor can be mounted.

Slide the monitor downward

Operation

Operation

Turn on the power at the bottom side of the hand grip. The power indicator lights. The switch acts also as a dimmer for the twin LEDs at the imager head.

Don't buckle the tube. The min. inside radius of the 9mm camera tube should not go below 7 cm. This depends on the environmental temperature.

ON—OFF

2 LEDs

ON-OFF

Monitor

Turn the monitor on with the Power ON/OFF button. The power indicator lights. Setup a suitable lighting on the hand grip. In the next step setup channel 4 (CH4) for the transmission. Press and hold the Power ON/OFF button to turn the monitor off.

Line drawing of a hand inserting a device into a tablet (no text or symbols)

ON OFF

Selection photo or video recording

Pressing repeatedly to select channel 4

The signal transmission from hand grip to monitor uses the connector if the monitor is mounted on the hand grip. If not, the transmission is wireless via radio.

The range between monitor and hand grip is up to about 5m. In some cases the range can be up to 10m. The transmission range may vary according to the weather, location, interference and building construction.

Operation

Monitor, Setup and Operation

The monitor can act as a video recorder. You can make sapshots and videos, which are stored on the microSD card. The internal memory can not be used for records.

Insert SD Card (the SD card is optional)

Line drawing of a smartphone with an arrow pointing to it, showing no text or symbols on the device itself.

The microSD card slot has a built-in spring mechanism. After pushing the card it locks in place. If you have not pushed it in completely, it might jump away because of the power of the spring and low weight.

A microSD card is in the slot.
F The memory in the SD card is full
No SD card in the slot

To record a video

In the realtime monitoring status, press 🔊 button to enter VIDEO status as follows:

- Press OK button to start the record.

Capacity Of Battery VIDEO icon Date/ time 2009/02/11 14:50:40 CH4 Current Channel SD Card Icon [00:45:43] remaining time

After the recording is started the display shows:

CH4 Recording indicator 2009/02/11 [00:05:43] 14:50:40 2009/02/11 14:50:40 Recording time timestamp

To stop recording press OK button again.

The video is automatically saved in a file every 30 minutes.

Operation

To take a photo

In the realtime monitoring status, press ⬆ button to enter the photo mode as follows:

● Take a photo with the OK button.

Capacity Of Battery Photo icon 2009/02/11 14:50:40 date/time CH4 Current Channel SD Card Icon [6405] Remaining photo quantity

Playback of photos and videos

Press the Button. Play PLAYBACK 0001/0007 current folder Total folders Folder 1 of 7 2009-01-10 Folder 2 of 7 2009-01-11 2009-01-12 2009-02-05 2009-02-09 2009-02-11

• The first layer show the folders, which are created by the unit. The date, where the records are created, is the name of the folder.
• Select a folder with the ▲buttons and press the OK button.
  ● The second layer shows a list of records.

Operation

current folder Total folders Folder name 2009-01-10 0001 /0003 05:53:00 CH4 05:53:00 CH4" 05:53:03 CH4 CH4 = 1. Video CH4" = photo CH4 = 2.Video Recording time

The “ character with CH4 indicates, that the file is a photo.

Playback a video:

• Select a video with ▲buttons and press OK button to confirm.
• For pause press OK button
• For fast forward press and hold the ⬆ button.
• For fast backward press and hold the ▼ button.
• To exit press button.

OK: Ⅱ 2009/01/10 05:53:00

Playback photos:

• Select a photo with ▲buttons and press OK button to confirm.
• To exit press OK button.

Operation

To delete videos and photos

• Choose a video or a photo as described previously.
• Press the Ⓥkey for approx. 2 seconds.

2009-01-10 0002/0005 DELETE CURRENT FILE? 05:53:03 CH5 NO 05:56:40 CH5 YES 05:59:03 CH5 06:05:17 CH5

• Choose YES with the ⬆▼ key and confirm with the OK key.
  ● To cancel, choose NO and confirm with OK key.

Delete folder

• Choose a folder as described just now.
• Press the Key for approx 2 seconds in order to delete the folder.
• If the folder is not empty, you receive the following message: NOT EMPTY

PLAYBACK 0001/0007 2009-01-10 2009-01-11 2009-01-12 2009-02-05 FOLDER NOT EMPTY 2009-02-09 2009-02-11

• Delete the file in the folder
  Only an empty folder can be deleted.

Settings

The monitor has a menu where various adjustments can be done, like the language, the framerate, format of the memory etc.

- In order to reach the adjustments, press the Ⓞkey for approx. 2 seconds..

Operation

• For further procedure it makes sense to check, whether the right OSD language is selected.
• If the monitor language is set wrong, press the OK key twice to reach the selection menu. There the country flags are shown.
• Choose the correct flag and confirm with OK key

Menu navigation:

eys: Choice of a menu entry

OK-key: Confirm choice

key: back in menu, interruption, leave the menu

● The main menu is set up as follows:

SYSTEM SETTING

System setting: choose language, video system, format of the memory, favorite adjustments (factory adjustments) software version of the monitor

Language OK: ✓ English

Choose language:

Following languages are implemented english, easy chinese, german, french, spanish, portugiese, italian, japanese, dutch and russian.

Video system NTSC OK: ✓ NTSC PAL NTSC NTSC

Video system:

PAL and NTSC are available as video system

Operation

FORMAT WILL ERASE ALL DATA ARE YOU SURE? NO YES

Format:

By formatting, the content of the complete card is erased. For this reason an additional confirmation prompt appears.

To format choose YES, for program termination choose NO. Confirm with OK key.

RESTORE DEFAULT ARE YOU SURE? Here NO YES

Factory reset:

You can restore all setups of the monitor to factory setting.

Here you receive a confirmation prompt on the monitor. To reset choose YES, for termination choose NO, confirm with OK key

Frame Rate Fps The s 30 FPS ▲▼ OK: ✓

Recorder settings:

FPS, time stamp on/off, Preset Video or photo mode

The setting of picture rate per sec. affects the quality of the video. The more photos are taken per second, the better is the playback. However, the memory usage increases with higher picture rate.

Time Stamp OK: ✓ in this off

Time stamp: In many cases it makes sense to document the date and time for documentation in order to see date and time on the video upon viewing on the computer.

In this menu it can be defined, whether photos and videos must be marked with a time stamp. Choose OFF for time stamp off or ON for time stamp on.

Operation

Recording Type OK: ✓ VIDEO

Recording Type: Select the favorite mode of the monitor photos or videos

Date/Time 2009 /02 /13 Chan : 091 ▲▼◀▶ OK: ✓

Date/Time: Date and time must be adjusted correctly so the correct time and date is marked on the video

the input position with the OK key. Adjust the value with the ▲ keys. Exit the menu with the key.

Playback: Choose this menu when you want to start playback on the monitor. The selection occurs as described on page 10

software and connection to the computer

As soon as the monitor is connected to the computer via USB cable, it is set up as USB device. A corresponding symbol appears on the computer. The hardware installation can take a few minutes, depending on the operation system.

After the unit is set up on the computer, you can copy and delete videos or photos, like a harddisk. Should you have problems to play the videos, pls. install the video-player with the CD from the delivery content.

Technical data

hand grip

Imaging Sensor CMOS

Total Pixels 704 x 576 (PAL)

Horizontal View Angle 50°

Transmission Frequency 2468 MHz

Minimum Illumination 0 Lux

Modulation Type FM

Bandwidth 18 MHz

Unobstructed Effective Range 10 m

Power Supply 4xAA Batteries

Handle Dimensions(WDXH) 186 x 145 x 41(mm)

Weight(camera and handle) 450 g

camera diameter 16 mm

monitor

LCD Screen Type 3,5" colour TFT

Resolution 320 x 240

Videosystem PAL/NTSC

Transmission Frequency 2414, 2432, 2450, 2468 MHz

Supply Voltage built-in Li-Ion-Akku

Exterior Supply Voltage 5V/500mA

Videopegel 0,9-1,3Vpp / 75Ohm

Picture/Video Pixels 640 x 480

Video Size 27MB /minute

Frame Rate 30 frame/second

Dimensions(W x D x H) 100x70x25mm

Weight(About) 140g

Operating Temperature -10^ +50^/+14^ +122^

Operating Humidity 15\~85%RH

If the monitor is in an operating condition, which deviates from the function mode described here, it can be necessary to do a reset. Bend a paper clip upward in a 90° position and press with the paper clip carefully the RESET key, which is absorbedly inserted on the back of the monitor.

Declaration of conformity/Service information

Declaration of conformity

Hereby, dnt GmbH, declares that this Findoo Profiline Uno is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Please see page 66 also.

The declaration of conformity for this product can be downloaded from:

http://www.dnt.de/conformity

Disposal of electrical and electronic equipment

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU.

For more information, please contact the local authority or your retailer where you purchased the product.

Batteries do not belong into the domestic refuse. Empty batteries must be delivered to the specially arranged collecting points.

Service information

In case of complaints your device shows a defect, please consult your dealer or contact the service department of dnt to agree a servicing.

Service time: Monday until Thursday from 8.00-17.00h

Friday from 8.00-16.00h

Hotline/service: [phone]

E-mail: [e-mail]

Please do not send your device to our address without request by our service team. The expense and the risk of loss are for debits of the sender. We reserve to refuse the unrequested shipment or return corresponding goods to the sender at buyer's risk and expense.

Contenu

Three black electronic components with leads and pins, no visible text or symbols

Diagram of a vacuum cleaner with labeled parts and directional arrow indicating motion

Diagram showing a car with a parking sign and directional arrows, likely illustrating parking or parking-related instructions.

Line drawing of a mechanical component with an arrow indicating direction (no text or symbols)

Diagram showing battery cell structure with arrows indicating assembly or transformation from left to right

Line drawing of a device with ports and connectors, showing a hand holding a cable (no text or symbols visible)

Line drawing of a car interior showing dashboard and steering wheel (no text or symbols)

Fonctionnement

Fonctionnement

Dimensions 100x70x25mm

Poids 140g

Plage de température -10°C\~+50°C/+14°F\~+122°F

Haak, magneet, spiegel

Line drawing of a vacuum cleaner with a tool and label (no text or symbols)

Diagram showing a car with a parking seat and directional arrows, including a hammer and sickle symbol.

Line drawing of a mechanical component with an arrow indicating direction (no text or symbols)

Diagram showing battery cell structure with labeled components and directional arrows indicating assembly or transformation.

Line drawing of a device with ports and connectors, no text or symbols present

Line drawing of a car interior showing dashboard and steering wheel (no text or symbols)

Bedrijf

Bedrijf

Line drawing of a hand pressing down on a smartphone screen (no text or symbols)

ON OFF

Taal OK: ✓ English

Taal selecteren:

EC-Declaration of Conformity

marking

We, Manufacturer/Importer

D-63128 Dietzenbach, Germany

Declare that the product Findoo 3.6

is in conformity with

Council Directive 1999/5/EC (R&TTE Directive)

EN 300 440-2 V1.1.2 (2004-07)

EN 301 489-3 V1.4.1 (2002-08)

EN 301 489-1 V1.6.1 (2005-09)

EN 60065:2002+A1:2006

EN 50371:2002

2005/32/EC 2005(EC Regulation 1275/2008)

2005/32/EC 2005(EC Regulation 278/2009)

C€1313

Contact person: Reinhold Bauer

Tel. [phone]

Dietzenbach May 12th, 2010

R.Bauer

Raingold Household

Garantiebedingungen

Warranty regulations

1. In general the European warranty regulations are valid. Warranty starts with receipt of unit. In a warranty case, please submit the unit together with invoice, unit pass and error description. Without these documentary evidence we are not obliged to a warranty performance.
2. During warranty period we repair all constructional or material defects which are caused by a manufacturing fault. It is in the decision of the manufacturer to change or replace defective parts/units. Further claims are excluded. Changed parts will automatically go over into our property. We will not be held responsible for future damages.
3. Manipulation on the unit through non-authorized companies/persons automatically leads to an end of warranty period.
4. Excluded of warranty claims are damages due to improper treatment, not following the manual, oxidation of batteries, permanent usage.
5. The initial warranty period is not extended because of repair or replacement of parts.
6. These warranty regulations are valid in the Federal Republik of Germany.

Application de la garantie

Stamp and signature of the dealer