BZ-FLXN-01 - Camera accessory Proaim - Free user manual and instructions

USER MANUAL BZ-FLXN-01 Proaim

Flexino Bazooka Set for Video Film Camera Dolly (BZ-FLXN-01)

Assembly Manua I

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

PREAM 4 x Extensions Double Male Thread Adapter Euro Adapter Female Euro Adapter Male 1 x L-Type Allen key (Size: 5/16") Flight Case

All rights reserved.

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.

Flexino Bazooka Setup

Assembling of Extension 1 (32cm)

- Insert the 1st extension (32cm) into the Euro Female Adapter, then rotate and tighten it properly.

Two black cylindrical devices with attached mechanical components, one being handled by a hand (no visible text or symbols)

NOTE: A Euro Female Adapter at the base facilitates easy attachment for additional extensions and a ratchet lock lever for locking the extensions in place.

Black cylindrical mechanical component with a small protrusion at the end (no text or symbols visible)

Assembling of Double Male Thread Adapter (2cm)

- Insert the Double Male Thread Adapter to the 1st Extension, then rotate and tighten it properly.

Two black cylindrical mechanical components with a hand adjusting one top, shown from different angles (no text or symbols visible)

- The Double Male thread Adapter has been properly mounted on the 1st Extension.

Black cylindrical mechanical component with a small protrusion at the base (no visible text or symbols)

Assembling of Extension 2

- Insert the 2nd Extension into the Double Male Thread Adapter, then rotate and tighten it properly.

Two-step illustration showing a hand holding a black cylindrical device, with no visible text or symbols.

- The 2nd Extension has been properly mounted on the Double Male Thread Adapter.

Black cylindrical mechanical component with a small protrusion at the end (no visible text or symbols)

Assembling of Extension 3 (4cm)

- Mount the 3rd Extension (4cm) on the 2nd Extension, then rotate and tighten it properly.

Hand holding a black cylindrical object against a white background (no text or symbols visible)

Hand holding a black cylindrical object against a white background (no text or symbols visible)

- The 3rd Extension has been properly mounted on the 2nd Extension.

Black cylindrical mechanical component with a small protrusion at the base (no visible text or symbols)

Assembling of Extension 4 (10cm)

- Mount the 4th Extension on the 3rd Extension, then rotate and tighten it properly.

Hand holding a black cylindrical object against a white background (no text or symbols visible)

Hand holding a black cylindrical object against a white background (no text or symbols visible)

NOTE: The Bazooka, with its detachable extensions, makes it fast and ultra-easy for professional.

Pure vertical black cylindrical object with a small protrusion at the base (no text or symbols)

Assembling of Euro Adapter Male (4.8cm)

- Mount the Euro Male Adapter (4.8cm) on the 4th Extension, then rotate and tighten it properly.

Hand holding a black cylindrical object with a camera lens, against a plain white background (no text or symbols visible)

Close-up of a hand holding a black cylindrical device with a handle, against a white background (no text or symbols visible)

NOTE: Top mounting is facilitated by a Euro Male Adapter that lets you rig your camera gear with utmost security.

Vertical cylindrical mechanical component with stepped base and flange (no visible text or symbols)

Mounting on Dolly

- Loosen the ratchet knob of the Flexino Bazooka and mount it on the Euro Adapter (Not Included) on the Doorway Dolly (Not Included).

Close-up of a hand adjusting a black cylindrical object with a handle (no text or symbols visible)

Close-up of a hand using a tool to lift a black cylindrical component with mounting holes (no visible text or symbols)

• After mounting the Flexino Bazooka, secure it by properly tightening the ratchet knob.

Close-up of a hand using a tool to press or install a mechanical component on a black surface (no visible text or symbols)

Black and red wheeled cart with four wheels and a vertical post (no text or symbols visible)

- Loosen the ratchet knob of the Euro-Mount Offset Bracket (Not Included) and mount it on the Flexino Bazooka.

Hand holding a black mechanical component with a handle, against a white background (no text or symbols visible)

Person holding a black mechanical device with a pen inserted, next to a black cylindrical object (no visible text or symbols)

• After mounting the Offset Bracket, secure it properly by tightening the ratchet knob.

NOTE: The adapter is equipped with a Ratchet Knob on one side which provides secure lock-off to the camera.

Close-up of a hand holding a black mechanical component with a tool, no visible text or symbols

Close-up of a black mechanical lever or support structure (no text or symbols visible)

Mounting of Fluid Head

- Loosen the Castle Ring of the Fluid Head (Not Included) and mount it on the Offset Bracket.

• After mounting the Fluid Head, attach the Castle Ring to the bottom of the Fluid Head and properly secure it.

Close-up of hands holding a black camera module with a flange (no visible text or symbols)

Close-up of a hand holding a black camera module with a cable, next to a black mechanical bracket (no text or symbols visible)

Close-up of a hand interacting with a mechanical device mounted on a metal frame (no visible text or symbols)

Close-up of a mechanical lever assembly with a black handle and metallic head (no visible text or symbols)

Camera Mounting Setup

- Push the button of the Fluid Head and remove the Camera Plate.

- Now attach the Camera Plate to the Camera (Not Included) by matching the threads and properly secure with the help of a screwdriver (Not Included).

Close-up of hands operating a mechanical vise with a red circle highlighting a button (no text or symbols visible)

Close-up of a mechanical device with a cylindrical component and attached lever (no visible text or symbols)

Hand holding a black industrial camera with attached electronic device (no visible text or symbols)

Hand holding a black cylindrical device with a red circular annotation highlighting a component (no visible text or symbols)

- Now the Camera has been properly attached to the Camera Plate.

Hand operating a black cylindrical device with attached cables and sensors (no visible text or symbols)

- Slide the Camera onto the Fluid Head and properly lock with the help of the locking pin.

Person operating a red video camera on a stand (no visible text or symbols)

Close-up of a red LED camera mounted on a mechanical base with a hand adjusting the lever (no visible text or symbols)

NOTE: It provides a multitude of camera mounting configurations using additional, optional mounting accessories.

Mechanical device with mounted camera and orange handle (no visible text or symbols)

Black-and-white photo of a wheeled vehicle with a mounted camera and wheels (no visible text or symbols)

NOTE: The durable Bazooka Set comes equipped with different extensions to give you just the amount of elevation you are looking for.

32cm PROAIM 18cm 10cm 4cm 2cm 5.4cm 4.8cm

YOUR PROAIM FLEXINO BAZOOKA SET FOR VIDEO FILM ALL DRESSED UP AND READY TO GO!

Black and orange photo of a red and orange wheeled vehicle with a camera mounted on top (no visible text or symbols)

(SHOWN WITH OPTIONAL ACCESSORIES)

Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn't cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.

Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.

Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.