BG-N17-2 - Unspecified Vello - Free user manual and instructions

USER MANUAL BG-N17-2 Vello

Close-up of a black DSLR camera with attached grip and control buttons, no visible text or symbols on the device itself.

BG-N17-2

BAT TERY GRIP

Designed for the Nikon

D500 DSLR Camera

VELLO®

Thank you for choosing Vello.

The Vello BG-N17-2 is compatible with the Nikon D500 DSLR camera. The BG-N17-2 accepts one Nikon EN-EL15 rechargeable battery, in addition to the camera's internal battery. Eight AA batteries (alkaline, Ni-MH, or lithium) can be used instead for added convenience. The BG-N17-2 is equipped with alternate shutter release, control lock, function, and AF-ON buttons, as well as a multi selector and main and sub-command dials, for shooting in a vertical position.

Close-up of a black camera mode dial with control buttons and a 'LV' icon, set against an orange background (no readable text or symbols beyond UI elements)

Please read through this entire manual before using the BG-N17-2 battery grip.

Precautions

1. The BG-N17-2 should be used only with the compatible devices specified in this manual.
2. Use only with batteries and battery holders recommended in this manual. The BG-N17-2 cannot be used with other batteries or battery holders.
3. When the BG-N17-2 is not attached to the camera, cover the power/signal contacts with the contact cap. This prevents electrical shorts caused by metal coming into contact with the power/signal contacts.
4. When the battery holder is removed from the grip, remove the batteries or place the holder in a container to prevent electrical shorts caused by contact with other metal objects.
5. The memory card access lamp may glow temporarily when the BG-N17-2 is mounted or removed from the camera. This is part of the normal operation.

6. The battery level may not display properly if batteries are inserted before mounting the grip.

7. Remove batteries from the grip when not in use.

8. If you notice smoke, noise, or an unusual smell from the battery pack, discontinue use immediately. Remove the batteries and contact Vello Customer Service.
9. The BG-N17-2 does not have a power switch. Instead, use the camera power switch to turn the power on or off.
10. In cold temperatures, batteries can discharge at a faster rate. Warming up a cold battery can recover some of its lost charge and help improve its performance.
11. Keep this device away from water or extreme humidity, and store it in a dry and cool place.
12. Keep out of reach of children.
13. All images are for illustrative purposes only.

Overview

Exploded view diagram of a digital camera module with numbered parts for identification

① Sub-command Dial *
② Tripod Socket
③ Shutter-Release Button *
④ Control Lock Switch

To prevent accidental triggering, the control lock switch locks the shutter-release button, function button, AF-ON button, multi selector, and main and sub-command dials on the BG-N17-2. Unlock prior to use by switching to the ● position. The control lock is not a power switch.

⑤ Function Button

Can be programmed in Custom Settings menu on your camera.

6 Contact Cap

⑦ Power/Signal Contacts
⑧ Mounting Screw
⑨ Camera Contact Cover Holder
10 AF-ON Button *
11 Main Command Dial *
12 Multi Selector *
13 Locking Wheel
14 Battery Holder
15 Battery Holder Latch
16 Battery Chamber

17 EN-EL15 Battery Holder

Holder for Nikon EN-EL15 battery.

18 Power Terminals

(EN-EL15 Battery Holder)

19 Push Button

Ejects the battery in the EN-EL15 Battery Holder.

20 AC Power Supply Socket

Nikon EP-5B Power Supply Connector port (connector not included).

21 AA Battery Holder

Holds eight AA batteries.

* These controls perform the same functions as their on-camera equivalents and are affected by changes to the Custom Settings menu. See camera manual for details.

Attaching the Grip

Two identical diagrams showing a circular object with internal features before and after transformation (no text or symbols)

1. Ensure that the power is turned off on the camera and that the Control Lock on the BG-N17-2 is in the L position before attaching the grip.

Line drawing of a device casing with an orange arrow pointing to a component (no text or symbols)

1. Remove the contact cap from the BG-N17-2 battery grip. When the BG-N17-2 is not attached to the camera, replace the contact cap to protect the contacts.

Diagram of a device's internal structure showing a connector with an attached port and directional arrow (no text or symbols)

1. The contacts for the BG-N17-2 are on the bottom of the camera, where they are protected by a rubber contact cover. Remove the contact cover from the camera before mounting the grip.

Technical line drawing of a device casing with a yellow arrow pointing to a component (no text or symbols)

1. To prevent loss, place the camera contact cover into the contact cover holder on the BG-N17-2.

Diagram of a DSLR camera showing front and side views with no text or symbols

1. Connect the BG-N17-2 grip to the camera while aligning the grip's mounting screw with the camera's tripod socket.

Line drawing of a DSLR camera with no visible text or symbols on the body (pure technical diagram)

1. Rotate the attachment wheel in the direction shown by the arrow until the grip is secure.

Inserting Batteries

Two identical diagrams showing a circular object with a central element, connected by a black arrow (no text or symbols)

1. Ensure that the power is turned off on the camera and the Control Lock on the BG-N17-2 is in the L position.

Mechanical assembly diagram showing a piston and lever mechanism with orange arrows indicating motion (no text or symbols)

1. Lift the battery holder latch so you can rotate it counterclockwise and pull the battery holder out of the grip. The EN-EL15 battery holder comes pre-installed.

Diagram showing a battery pack being processed into a motor, with no visible text or symbols.

1. Nikon EN-EL15 Battery: Align the indentations on the battery with the EN-EL15 holder. Then press the battery down and slide it in the direction of the arrow until the power terminals click into place.

Two mechanical components with orange arrows indicating assembly or transformation (no text or symbols)

AA Batteries: Place eight AA batteries of the same type in the AA battery holder as shown. Make sure the batteries are in the correct orientation.

Diagram of a device's internal structure with an orange arrow indicating direction (no text or symbols present)

1. Make sure the battery holder latch is rotated counterclockwise, and slide the battery holder all the way into the grip. Rotate the latch clockwise, and reposition it so it's flush with the side of the grip. Turn on your camera, unlock the BG-N17-2 via its Control Lock switch, and check the battery level in the control panel or viewfinder.

Battery Info

The camera displays the following battery levels.

Nikon EN-EL15 Battery:

LCD/Control Panel	Viewfinder Description
	—	Battery fully charged.
	—	Battery partially discharged.
		Low battery.Prepare spare batteries.
(blinking)	(blinking)	Battery exhausted.Shutter release is disabled.

AA Batteries:

LCD/Control Panel	Viewfinder Description
	—	Batteries fully charged.
		Low battery power. Prepare spare batteries.
(blinking)	(blinking)	Batteries exhausted.Shutter release is disabled.

AA Battery Settings

To ensure that the camera shows the correct battery level when AA batteries are used, choose the appropriate setting in the Setup menu (MB-D17 battery type).

MB-D17 battery type LR5 LR6 (AA alkaline) MH HR6 (AA Ni-MH) FR6 FR6 (AA lithium)

Nikon Rechargeable Batteries

The camera can display information (including calibration information) for Nikon EN-EL15 batteries via the Battery Info option in the Setup Menu. For AA batteries, only battery levels are displayed.

Battery info D500 MB-D17 Charge 74% 100% No. of shots 58 0 Battery age 0 0 (0 - 4) OK Done

Battery Order

Set the order in which the internal camera and BG-N17-2 batteries are used via the Setup menu (Battery order). When the

P 1/125 F5.6 ISO 100 R:200 A B C D E F F G H I U I V J K L M N O P Q R S T U U U V X Y Z [+] [+] • NORM [+] AF-S [+] [2.1]

camera is drawing power from the BG-N17-2, the battery gauge for the grip is displayed in the control panel (BP).

Note: The menu screens on this page are from the D500.

Removing the Batteries

PUSH

1. EN -EL15 Battery Holder: While pressing and holding the PUSH button on the holder, slide the battery toward the button and lift up to remove.

Diagram of a mechanical device with orange arrows indicating force or movement (no text or symbols present)

1. AA Battery Holder: Remove the batteries one row at a time (as shown). Be sure that the batteries do not drop during this process.

Specifications

Power Source • One EN-EL15 rechargeable Li-ion battery orEight LR6 Alkaline, HR6 NiMH or FR6 Lithium AA batteries orNikon EP-5B Power Supply Connector

Operating Temperature 32°F to 104°F (0°C to 40°C)

Dimensions (W × H × D) 5.9 × 2 × 3.2 in. (15.1 × 5.3 × 8 cm)

Weight 8.1 oz. (231 g) with EN-EL15 battery holder (excluding battery)

Specifications and design are subject to change without notice.

One-Year Limited Warranty

This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider's responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider's discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Vello along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit vellogear.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

VELLO is a registered trademark of the Gradus Group.

© 2019 Gradus Group LLC. All Rights Reserved.

All other trademarks are the property of their

respective owners

VELLO®

www.vellogear.com

VELLO

A Gradus Group Brand

GG1