BG-N16-2 - Unspecified Vello - Free user manual and instructions

USER MANUAL BG-N16-2 Vello

BG BATTER

BG-N16-2

BATTERY GRIP

Designed for the Nikon

D5500 and D5600 DSLR Cameras

VELLO®

Thank you for choosing Vello

The Vello BG-N16-2 battery grip offers extended shooting time and comfort when shooting in a vertical (portrait) orientation. The grip is compatible with the Nikon D5500 and D5600 DSLR cameras and accepts up to two Nikon EN-EL14/EL14a rechargeable batteries. It offers an alternate shutter release button that triggers the camera via the included shutter release cable, making the grip ideal for shooting portrait photography. An included IR remote allows easy line-of-sight wireless shooting.

Please read through this entire manual before using the BG-N16-2 battery unit

Please read through this entire manual before using the BG-N16-2 battery grip.

Precautions

1. The BG-N16-2 should be used only with compatible devices specified in this manual.
2. Use only with the batteries and battery holders recommended in this manual.
3. If you notice smoke, noise, or an unusual smell from the battery pack, discontinue use immediately. Remove the batteries, and take the device to a Vello authorized reseller.

4. The battery level may not display properly if batteries are installed before mounting the grip.

5. Remove batteries from the grip when not in use.

6. Do not attempt to disassemble.
7. Avoid exposing this product to water or extreme humidity, and keep it in a cool, dry place.
8. Keep out of reach of children.
9. All images are for illustrative purposes only.

Overview

Exploded view diagram of a device with numbered parts for identification

① Shutter release button
② Handstrap mount
③ Tripod socket
④ Nonslip grip
⑤ IR remote sensor
6 Thumbwheel lock
⑦ 2.5 mm remote cable socket

⑧ Battery tray compartment
⑨ Battery tray lock
10 Mounting screw
⑪ Control lock switch
⑫ Camera battery door holder
13 Power contacts
14 Contact cap

15 Battery slot 1
16 Slot 1 contacts
17 Slot 2 contacts
18 Battery slot 2
19 6-bay AA battery tray
20 IR remote
②1 Shutter release cable (2.5 mm to accessory terminal)

Attaching the Battery Grip

OFF ON OFF ON

1. Ensure that the camera power is turned off.

Diagram of a car interior showing a door handle and control panel with an orange arrow indicating direction (no text or symbols)

1. Remove the camera's battery chamber door. Pull gently at a 45° angle until the door detaches.

Diagram of a device with a door and a close-up view showing an orange arrow pointing to a component (no text or symbols present)

1. Slide the chamber door into the BG-N16-2's camera battery door holder for safekeeping.

Diagram of a DSLR camera with an attached device, showing no text or symbols

1. Remove the power contact cap, and insert the battery grip's power contacts into the camera's battery chamber.

Line drawing of a DSLR camera with an orange arrow indicating compression or disassembly (no text or symbols)

1. Rotate the thumbwheel counterclockwise until the grip is secured to the camera.

Technical line drawing of a camera assembly with no visible text or symbols

1. Connect the shutter release cable from the 2.5 mm remote cable socket on the grip to the accessory terminal on the camera.

Inserting the Batteries

OFF ON OFF ON

1. Turn off the camera's power, and make sure the grip's control lock switch is in the Off position.

Mechanical assembly diagram showing a shaft and housing with orange motion indicators (no text or symbols)

1. Twist the battery tray's lock counterclockwise, and remove the battery tray from the grip.

Diagram of a mechanical component with arrows indicating force or movement (no text or symbols)

1. Nikon EN-EL14/EL14a: Insert the first battery into slot 1 as shown and push down to lock the battery in place. Repeat for slot 2.

Technical line drawing of a mechanical assembly with multiple cylindrical components and mounting holes (no text or symbols)

AA Batteries: Place six identical AA batteries into the AA battery tray as indicated.

Technical line drawing of a mechanical assembly with no visible text or symbols

1. Insert and lock the battery tray inside the battery grip.

Pure mechanical diagram showing a lever mechanism with an orange arrow indicating direction (no text or symbols)

1. Turn on the camera power, and make sure the grip's control lock switch is in the On position.
   Note: When removing the grip, turn off the camera's power and control lock switch, and then remove the batteries.

IR Remote

The IR remote works with the Nikon D5500 and D5600 DSLR cameras and allows you to trigger your camera wirelessly. Make sure the shutter-release cable is plugged into the grip and camera, and that the remote is pointed at the grip's IR sensor. The IR remote works through line-of-site, so make sure there are no obstacles blocking the signal.

Specifications

Power source Up to two Nikon EN-EL14/EL14a type rechargeable Li-ion batteries

Operating temperature 32°F to 104°F (0°C to 40°C)

Dimensions (H × W × D) 4 × 5 × 3.4 in. (10.2 × 12.7 × 8.7 cm)

Weight 7.4 oz. (209.8 g) without batteries

ONE-YEAR LIMITED WARRANTY

This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider's responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider's discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Vello along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.vellogear.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

VELLO is a registered trademark of the Gradus Group. © 2020 Gradus Group LLC. All Rights Reserved.

VELLO®

www.vellogear.com

VELLO*

A Gradus Group Brand

All other trademarks are the property of their respective owners.