WSWM3IWP - Speaker Stand SANUS - Free user manual and instructions

USER MANUAL WSWM3IWP SANUS

Integrated Wall Mount and Inwall Power for Wireless Speakers

Model WSWM3IWP-B1

INSTRUCTION MANUAL

We'll Make It Stress-Free

If you have any questions along the way, just give us a call.

1-800-359-5520 or, chat at SANUS.com/chatSP

We're ready to help!

Technical line drawing of a mechanical device with a vertical arm, coiled cable, and terminal plug (no text or symbols)

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ENTIRE MANUAL PRIOR TO USE - SAVE THESE INSTRUCTIONS

CAUTION: Avoid potential personal injuries and property damage!

• Please read through these instructions completely to be sure you're comfortable with this easy install process.
• Do not use this product for any purpose not explicitly specified by manufacturer.
  ● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
  ● This product has no user serviceable parts.

- If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact customer service.

WARNING: RISK OF FIRE AND SHOCK.

Do not connect the module 2 to any other circuits or outlets.

CAUTION: RISK OF FIRE AND SHOCK.

ONLY intended for use on 15 ampere branch circuits.

CAUTION: RISK OF FIRE AND SHOCK.

Do not install power supply cord 14 within wall cavity.

This product conforms to and should be properly grounded in compliance with requirements of the current National Electrical Code or codes administered by local authorities.

All electrical products may present a possible shock or fire hazard if improperly installed or used. This product may bear the mark of a Nationally Recognized Testing Laboratory and should be installed in conformance with current local and/or the National Electrical Code.

GROUNDING INSTRUCTIONS: This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug.

The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Speaker Weight Limit

DO NOT EXCEED

Tools Required

Tape MeasureStud Finder Pencil Level

Phillips Screwdriver

Slotted Screwdriver

Drywall Saw

Supplied Parts

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

NOTE: Not all parts will be used.

Cutting Template
1 x1

Upper Module ② x1

C CAP (ATTACHED)

Wall Mount
3 x1
E100 Speaker Bracket
4 x1

Speaker Install Screws

For back-mounted speakers For Sonos

Only one size fits your speaker

x1each

Spacers SONOS E100

If Needed

* Era 100* Speakers

(1) 2017年1月1日

2.5mm

10-24×1/2 in

M5 x 12mm

5mm

2012.17.1

M5 x 20mm

Cover Plate
5 x1

Lower Module
6 x1

Cable Cap
7 x1

In Wall Box Assembly

x2

4-20 x 3/4 in.

9

6-32×5/16 in.

Simple line drawing of a power cord with two plug connectors (no text or symbols)

14 x1

! Verify Wall Compatibility

This product is designed to fit into interior exterior walls constructed with: ● Minimum Space into Wall: 3 in. ● Minimum Drywall Thickness: 1/2 in. (MAX: 1 in.) Back Wall Stud Drywall NOTE: The cable Pass-Through Width is 1.75 inch. Walls with blown-in type insulation may require removal of some insulation inside the cavity. No Fire Block Stud in the cavity * * A horizontal fire block stud requires a 1.75 inch hole to pass the power cord. This requires removal, then repair of drywall, to gain access to that stud. Consulting a professional is recommended.

Based on your speaker model, follow the correct STEP below

For Universal (back-mounted) Speaker Installation, go to STEP 1 on PAGE 6

Line drawing of a cylindrical container with a square button and a circular hole on top (no text or symbols)

For Sonos® Era 100™ Speaker Installation, go to STEP 2 on PAGE 8

Line drawing of a cylindrical container with side markers (no text or symbols)

STEP 1

Universal (back-mounted) Speaker Assembly

1a

C 3

Diagram showing an eye under a ceiling-mounted device with a light source, no text or symbols present

for Installing in HIGH Locations

(Speaker upside down to access the controls)

Diagram showing an eye interacting with a cylindrical device, illustrating visual perception or measurement concept.

for Installing in LOW Locations

graph TD
    A["Step 1: User input, switch"] --> B["Step 2: Press"]
    B --> C["Continue with Step 2 on Page 8"]

STEP 2

Cut Holes

2a Up to 8 ft. Outlet Height Up to 6 ft.

2b UPPER MODULE 1 UP CUTTING TEMPLATE OFFER VAT 1 LOWER MODULE 1 UP CUTTING TEMPLATE OFFER VAT 1

Two identical illustrations of a tool with a pointed tip, placed on a rectangular block (no text or symbols)

STEP 3

Install Upper Module

3a 2 TIP: Use a fish tape, to pull the cables through the wall.

2x 2

NOTE: The module should easily slide into the wall — if needed, shave the opening enough to fit.

2x 2

Based on your speaker model, follow the correct STEP below

For Universal (back-mounted) Speaker Installation, go to STEP 4 on PAGE 11

Simple line drawing of a cylindrical container with a square slot and a small circular top (no text or symbols)

For Sonos® Era 100™ Speaker Installation, go to STEP 5 on PAGE 12

Simple line drawing of a cylindrical container with side markers (no text or symbols)

STEP 4

Universal Speaker (back-mounted) Installation

4a OPTIONAL 3

Technical diagram illustrating mechanical assembly steps with numbered components and a lock mechanism

Diagram showing hand operating a water heater with labeled components and directional arrows indicating electrical connection.

4d C 3

Go to STEP 6 on PAGE 16

STEP 5

Sonos ^® Era 100 ^™ Speaker Installation

5a

3d C 3

Technical diagram illustrating a door lock mechanism with labeled parts and steps for locking or adjusting the lock.

for Installing in HIGH Locations (Speaker upside down to access the controls)

for Installing in LOW Locations

5c5 4

4 12 3

5c5 4

12 4 3

5e

5f C 3

for Installing in HIGH LOCATIONS (Speaker upside down to access the controls) for Installing in LOW LOCATIONS

Go to

STEP 6

on

PAGE 16

STEP 6

Install Lower Module

6a 2 6 7 8 DO NOT over tighten screws

6 OPTIONAL

6c 2x 6 NOTE: The module should easily slide into the wall — if needed, shave the opening enough to fit.

2x 6

Technical diagram showing exploded view of a mechanical assembly with numbered components and labeled parts

STEP 7

Connect Cable

6 14

Removal

a

Disconnect the power cable

Illustration of a power plug connected to an open electrical outlet with two socket slots (no text or symbols)

b

Turn screws to remove modules

Loosen ONLY enough remove module.

Diagram of a mechanical device with labeled parts 2 and 6, showing directional arrows and components.

Safety warning illustration showing a hand holding a device with an exclamation mark and a sad face symbol

ESPAÑOL

PASO 7 Conectar Cables

página 18

Para retirar

página 19

SANUS® A brand of Legend

Legrand AV Inc.

6436 City West Parkway;

Eden Prairie, MN 55344 USA

SANUS.com | 800-359-5520

Legrand AV Inc. and its affiliated corporations and subsidiaries (collectively, "Legrand"), intend to make this manual accurate and complete. However, Legrand makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Legrand makes no representation of warranty, expressed or implied, regarding the information contained herein. Legrand assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

©2024 Legrand AV Inc. All Rights Reserved. SANUS is a Legrand AV Inc. brand. SANUS and the SANUS logo are trademarks of Legrand.

6901-603275 00