1502 - Pump Waterstone - Free user manual and instructions
Find the device manual for free 1502 Waterstone in PDF.
User questions about 1502 Waterstone
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Pump in PDF format for free! Find your manual 1502 - Waterstone and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 1502 by Waterstone.
USER MANUAL 1502 Waterstone
BAR FAUCET INSTALLATION INSTRUCTIONS
Model #s:
1300
1350
1500
1502
1550
1552
1600
1625
1800
1850
2500
natural_image
Modern stainless steel kitchen faucet with dual handles and a curved handle (no text or symbols visible)
1300
1350
1500
1550
15021552
18001850
16251600
2500
BEFORE YOU BEGIN YOUR INSTALLATION:
1
Turn off water supply. Observe all local plumbing codes.
natural_image
Black and white icon of a pipe with water droplets, symbolizing water pollution or drainage (no text or symbols)Inspect waste and water supplies for signs of damage. Replace as necessary.
text_image
Prohibition sign with black droplet symbol and diagonal line, indicating no pollution or water hazardDO NOT use petroleum based products on this faucet.
REQUIRED TOOLS: PARTS INCLUDED:
- Adjustable Wrench
HK-FBF-XX\* BAR FAUCET HARDWARE KIT
*XX represents finish
LIFETIME WARRANTY
All Waterstone products manufactured by Waterstone carry a Limited Lifetime Guarantee against functional defect in material or workmanship in a residential application. Consult with an authorized Waterstone dealer for complete information about our warranty.
For any questions or concerns about your faucet's warranty, contact Waterstone.
Waterstone Faucets
41180 Raintree Court • Murrieta, CA 92562
1-888-304-0660
www.waterstoneco.com
WATERSTONE™
FAUCETS
natural_image
Modern stainless steel kitchen faucet with curved handle and side handles (no text or symbols visible)BAR FAUCET INSTALLATION
text_image
1. Slide escutcheon plate (A) onto threaded shroud (B) and up to base of faucet.
text_image
2. COUNTER OR SINK C D Fit flexible hoses (C, D) through hole on counter or sink.
text_image
3. E F Slide washer (E) and thread the nut (F) onto threaded shroud. Hand tighten nut to underside of sink or counter.
text_image
4. Turn faucet to the desired handle position. Securely tighten nut with adjustable wrench.CONNECTING SUPPLY HOSES
- Before connecting supply hoses, flush supply stops to clear any debris. Place a bucket underneath stops and run water for 5 to 10 seconds. Turn water off.
- Carefully position hot and cold supplies so they will not interfere with other hoses.
- Connect supply hoses (A) to supply stops (B). DO NOT use teflon tape or plumbers putty. Turn water back on and check for leaks.
text_image
A BCLEANING AERATOR AND DEBRIS SCREEN
text_image
1. A
text_image
B C
natural_image
Line drawing of a hand holding a syringe with liquid dripping (no text or symbols)
natural_image
Simple line drawing of a mechanical component with an arrow indicating downward motion (no text or symbols)
natural_image
Diagram of a curved pipe with a circular base and upward arrow indicating rotation (no text or symbols)Depending on quality of your household water, the aerator and debris screen may become clogged. We recommend cleaning one week after installation, then a minimum of once of year thereafter. To remove the debris, follow the steps below.
- Gently unscrew and remove spout tip (A) by hand.
- Remove O-ring (B). To remove aerator (C), push with finger from bottom.
- Thoroughly rinse aerator with water until all debris is removed.
- Place aerator, then O-ring back into spout tip.
- Gently screw spout tip, by hand, snuggly back onto spout.