VT-5184 - Lighting V-TAC - Free user manual and instructions

USER MANUAL VT-5184 V-TAC

INSTALLATION INSTRUCTION

LED V-TAC SMART DOME LIGHT

TECHNICAL DATA

MODEL	VT-5184	VT-5138
WATTS	24W	36W
LUMENS	2400LM	3600LM
BEAM ANGLE	SPHERE 360°	SPHERE 360°
CRI	80	80
DF	0.7	0.9
MATERIAL	Plastic(PMMA)+Metal(Iron)
INPUT POWER	AC:220-240V, 50/60Hz
DIMENSION	ø310x55mm	ø350x55mm
OPERATION TEMPERATURE	-20°C to +40°C

Smooth, oval-shaped object with scattered white star-like dots on a light gray background (no text or symbols)

V-TAC SMART LIGHT

works with Ok Google

WORKS WITH alexa

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC SMART LED Lighting. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: [e-mail] FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

SAFETY WARNING

1. Please make sure to turn off the power before starting the installation.
2. Installation should only be done by a certified electrician.
3. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
4. Proper grounding should be ensured throughout the installation.
5. Luminaire are limited to indoor use and are not advisable for use in humid environment
6. Luminaire is to be used in well ventilated areas and normal installation.
7. Do not exert external force or throw on the luminaire.
8. Luminaire should be stored in cool/dry place. Always make sure the environment is clean before installing the luminaire.
9. Do not discard the luminaire with regular trash. Luminaire are made with electronic components and should be properly disposed at designated locations with unified treatment like traditional electronic equipment.

NOTE:

1. This device requires Wi-Fi Frequency 2.4Ghz
2. Indoor use only
3. Operating frequency (maximum transmitted power) 2400MHz -2483.5MHz (20dBm)

graph LR
    A["LED"] --> B["Sensor Icon"]
    B --> C["LED"]

Replaceable (LED only) light source by a professional

This marking indicates that this product should not be disposed of with other household wastes.

Caution, risk of electric shock.

QR code image containing encoded data, no visible human-readable text

MULTI-LANGUAGE MANUAL QR CODE

Please scan the QR code to access the manual in multiple languages.

INSTALLATION

1) Switch Off the Power Before Starting the Installation (Ref Image No. 1).
2) Twist and remove the cover (Ref Image No. 2).
3) Drill Hole in the ceiling to fix the light using screws (Ref Image No. 3).
4) Connect the wires (Ref Image No. 4) before fixing the light using screws on the ceiling.
5) Twist and lock the cover to the light (Ref Image No. 5).
6) Tighten the 3x12 screw[included][This step only for 24W] (Ref Image No. 6).
7) Switch ON the power and start pairing the light with the App (Ref Image No. 7).

INSTALLATION DIAGRAM

INSTALLATION DIAGRAM

APP INSTALLATION

Step 1: Scan the given QR code, or download "V-TAC Smart Light" from the App Store (iOS) or the Google Play Store (Android).

For ANDROID

QR code image containing encoded data, no visible human-readable text

For IOS

QR code image containing encoded data, no visible human-readable text

Step 2: Open the V-TAC Smart Light app and tap on register for creating a new account.

V-TAC Smart Light

Login

Register

Step 4: Enter the verification code which will be sent to your mobile number/email id, then assign a new password to your account and tap on "Confirm".

Back Register Verification code is sent to your phone: +44 wwee Verification Code Get Please Input Password Confirm

Step 3:

A) Mobile Number: Select the country, then enter your mobile number. Once done, tap 'Next'.

B) E-Mail: Enter your email id and tap on 'Next'.

< Back Register United Kingdom +44 > Mobile Number/E-mail Next

Step 5: Tap on 'Add Device' or the + sign. Make sure the luminaire is switched on.

G Welcome Home Set your home location for more information > All Devices Living Room Bedroom No devices, please add Add Device

Cancel Add Manually Auto Scan Electrical Engineeri... Lighting Large Home Ap... Small Home Ap... Lighting (WiFi) Lighting (Bluetooth) Lighting (ZigBee) Lighting (other) Light Modulator (ot... Lighting Product Remote C... (Bluetooth)

Step 6: Choose 'Lighting' to start pairing the luminaire to the app.

Step 7: To pair the device with luminaire make sure the light is blinks rapidly.

Once the light blinks rapidly, the luminaire is in pairing mode. If the bulb is not blinking rapidly, you can do one of the following steps:

A. Switch the smart device on & off repeatedly for 3 times, with short intervals of less than 2 seconds.
B. Tap the 'How to make light blink rapidly' link. (ref image below)

Network Modes:

1) EZ Mode: Light flashes twice per second
2) AP mode: Slow flash, once every 2 second

Confirm if the light blinks rapidly, select the WiFi network, and enter the password.

Reset the device first. If the light is blinking rapidly, pls skip the reset step ① Power on the device; ② Turn on-off-on-off-on [Subject to the user manual]; ③ Ensure the light is blinking rapidly; Note: please complete the network distribution within 3 minutes after resetting the device ① ② On/Off ×3 ③ Perform net pairing as prompted. Confirm the light is blinking rapidly.

Cancel Reset the device first If the light is blowing sound plus (1) Power on the device (2) Turn on-off (3) (4) Subject to the use (main) (5) Ensure your light is blowing rapidly. Note: please complete the network distribution within 3 minutes after resetting the device. EZ Mode Default AP Mode 1 2 3 On/Off x3 Perform net passing as triggered. > Confirm the light is blinking rapidly.

Only 2.4 GHz Wi-Fi networks are supported > Vtac Change Network Password Confirm 1 2 3 4 5 6 7 8 9 0 q w e r t y u i o p a s d f g h j k l ↑ z x c v b n m !#1 , Done

Step 8: Once you have successfully completed step 7, you will be redirected to below page, where the App searches, registers and initializes the device (ref image below).

Step 9: Once your device is successfully added, rename the device to your preference.

Connecting...

Place your router, mobile phone, and device as close as possible

Device added successfully

Light

Living Room

Bedroom

Second Bedro...

Dining Room

Kitchen

Study Room

Done

Step 10: After successfully pairing the smart device with the app, you can start controlling multiple features of the luminaire through your mobile—on/off switch, changing the colour temperature, timing & schedules, dimming options, and more.

Welcome Home Set your home location for more information > All Devices Living Room Bedroom ... Light Living Room Common Functions Home Smart Me

Night sky with a glowing light bulb above silhouetted trees, labeled 'Left time', 'Schedule', and a play button (no text on the light itself)

Left time Schedule

ALEXA SETTINGS

Step 1: Install the Amazon Alexa app via the App Store(iOS) or the Play Store (Android) and register. If you already have an existing account with Amazon Alexa, please proceed to logging in.

Step 2: Once you are on the Amazon Alexa home page, tap on the lower right icon — where the arrow is pointed— to add a new device and skill.

amazon alexa Login Forgot password? Mobile number or Email Amazon password Show password LOGIN New to Amazon? CREATE A NEW AMAZON ACCOUNT

Step 3: Tap on settings and tap on

A New Way to Manage Devices Set up and control Alexa and smart home devices in one convenient place NEXT

Step 4: Search for 'V-TAC Smart Light' on the "Skills & Games" page as shown below.

"skills and games" as shown below.

Add Device Lists Reminders & Alarms Contacts Routines Things to Try Skills & Games

SKILLS & GAMES SEARCH Search Keyword or skill name V-TAC Smart Light

Step 5: Enable the Skill.

Step 6: Enter your V-TAC Smart Light login ID and password and tap on "Link Now"

ENABLE

Account linking in progress

+1

Phone Number/Email Address

Type your password here

Link Now

Forgot Password

Help

Step 7: Once you tap on Link Now, you will be redirected to a new page requesting for authorization(Ref Image below). Tap on "Authorize"

Step 8: You will receive confirmation of the account being linked successfully (Ref Image below)

Alexa by Amazon will be able to:

Receive your public profile Control your devices over internet

Authorize

Done

skills-store.amazon.in

amazon alexa

V-TAC has been successfully linked.

What to do next:

→ Close this window to discover smart home devices you can control with Alexa.

Step 9: Discover your smart device on Alexa. Once you have enabled the skill A) You can use voice command "Alexa discover devices" to the Alexa device which you have.

B) To add device manually on home page tap on and tap on Add device, select the device which you are adding and tap on discover device.

Add Device Lists Reminders & Alarms Contacts Routines Things to Try Skills & Games

Amazon Echo Light Plug Switch Hub Thermostat Speaker

Note: Discovering the device must be done every time the device's name is changed on the app.

ALEXA Commands

Now, you can control your smart device using voice commands on Alexa.

Below are a few commands you can use:

➢! Alexa, turn on/off bedroom light.
➢! Alexa, set bedroom light to 50 percent.
➢! Alexa, set bedroom light to green.
➢! Alexa, set bedroom light to warm white.

THINGS TO REMEMBER BEFORE STARTING INSTALLATION:

1. V-TAC Smart Light App & Amazon Alexa App
2. Make sure you have Amazon Alexa Device(including Echo, Echo Tap, or Echo Dot)
3. Smart Device
4. Stable Wifi network

GOOGLE HOME SETTINGS

Step 1:

a&b) Install the Google Home app via the App Store (iOS) or the Play Store (Android) and register. If you already have an existing account with Google Home, please proceed to logging in.
c) Create a New Home/Choose from the existing home if any.
d) Power ON the Google Home device and connect it to the App.(Then Proceed to step 2)

a. Welcome home

Your content and devices all in one place

Abstract geometric shapes including rectangles, circles, and triangles (no text or symbols)

GET STARTED >

b. Choose account

This account will be used to personalize your experience

c. Choose a home

You will be able to control the devices and services in this home.

Create another home

d. Plug in your device

Make sure your device is nearby and connected to power, then try again

Step 2: Once you are on the Google home page, tap on the Add "+" icon- to add a new device and skill. And then tap on Set up device as shown in below image.
a.

Play

Office

Broadcast

Add

Settings

Office
1 device

Office Speaker
Pause

b.

Add to Home

Set up device

Add home member

Create speaker group

Create new home
Add services

Music and audio

Videos and photos

Step 3: Make sure the Smart Dome Light is paired with V-TAC Smart Light app before starting step 3. Tap on the arrow section as highlighted in the below image.

Set up

Set up new devices or add existing devices and services to your home

New devices

Set up new devices

Google Home, smart displays and devices labelled 'Made for Google' such as C by GE smart bulbs

Works with Google

Have something already set up?

Link your smart home services such as Philips Hue and TP-Link

Step 5: Sign In with your V-TAC Smart Light Login credentials to Link the Smart Light device

+1 Phone Number/Email Address Type your password here Link Now Forgot Password Help

Step 4: Type "V-TAC Smart Light" on the search bar and tap on the icon of "V-TAC Smart Light"

V-TAC Smart Light

Step 6: Tap on Authorize in order to proceed to linking the device.

Google will be able to:

Receive your public profile Control your devices over internet

Authorize

Step 7

a. Account will now be linked, please stay on the page you will be redirected in few seconds to select the device to add to your home.

b. Select the device and tap on Next as show in image b.

a. Done assistant.google.com Account is now Linked

b. ✗ Choose device

home light Light

Step 8: Select the Home where you would like to add the Smart Light under. (Or) you can create a New home in order to add the Smart Light to it.

Step 9: You have successfully added Smart Light device to your Google home App.

Choose a home

You will be able to control the devices and services in this home.

Smart-Home

Office

Smart Home

Create another home

Smart-Home

Off On Add Settings

Master bedroom

1 device

home light

Off

。

Local devices

1 device

Office Speaker

Step 10:

a. You can turn the device On/OFF by taping on On/Off options as shown below. (OR) You can tap on the Smart Light.
b. You will be redirected to page(as shown in image b) where you can control the lights "Power and Dimming functionality".

a. Smart-Home

Off On Add Settings

Master bedroom
1 device

home light Off • On

Local devices

1 device

Google Commands:

Now, you can control your smart device using voice commands on Google Home. Below are a few commands you can use:

➢! Ok, Google, turn on/off bedroom light
➢! Ok, Google, set bedroom light to 50 percent.
➢! Ok, Google, set bedroom light to green.
➢! Ok, Google, set bedroom light to warm white.

THINGS TO REMEMBER BEFORE STARTING INSTALLATION:

1. V-TAC Smart Light App & Google Home App
2. Make sure you have Google Home Device
3. Smart Device
4. Stable Wifi network