VT-908D - Lighting V-TAC - Free user manual and instructions

USER MANUAL VT-908D V-TAC

WEEE Number: 80133970

INSTRUCTION MANUAL

SMART HANGING PENDANT LIGHT

TECHNICAL DATA

MODEL	VT-908D
SKU	6889
INPUT VOLTAGE	DC:48V
LUMENS	700LM
POWER	8W
BEAM ANGLE	30'D
CRI	>90
BODY TYPE	Aluminum

Smart Life

Pure electrical circuit lines without any symbols

03 YEAR WARRANTY*

INTRODUCTION & WARRANTY

Thank you for selecting and buying SMART HANGING PENDANT LIGHT V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

This marking indicates that this product should not be disposed of with other household wastes.

Caution, risk of electric shock.

WARNING

1. Please make sure to turn off the power before starting the installation.
2. Installation must be performed by a certified person.
3. Proper grounding should be ensured throughout the installation.
4. For Indoor use only

QR code image containing encoded data, no visible human-readable text

MULTI-LANGUAGE MANUAL QR CODE

Please scan the QR code to access the manual in multiple languages.

FR

N L OFF OFF

Simple line drawing of a mechanical setup with a lever and a hanging weight (no text or symbols)

Take it off

Diagram showing a lamp with a light source and two labeled ON indicators below it.

1. Switch off the power.
2. Install the luminaire into the guide rail groove.
3. Check that everything is in order.
4. Switch on the power if above steps done properly without any mistakes.

APP INSTALLATION

Step 2: Scan the given QR code, or download "Smart Life" from the App Store (iOS) or the Google Play Store (Android).

QR code with a blue home icon in the center, likely linking to a digital service or app.

Add Device Top + and select Add Device Get It Add Devices

1. Enable Bluetooth and Home Wifi for the device to access your wifi connection for pairing

Add Device Create Scene Scan No devices Add Device

1. Click "Add a device" or "+" in the top right corner.

Add Device Add Manually Eversal Light Source Light Source (Blue) - No. 1 Light Source (White) Light Source (Grey) Light Source (Purple) Light Source (Red) Light Source (Green) Light Source (Blue) Light Source (Purple) Light Source (Red) Light Source (Green) Light Source (Blue) Light Source (Purple) Light Source (Red) Light Source (Green) Light Source (Blue) Light Source (Purple) Light Source (Red) Light Source (Green) Light Source (Blue) Light Source (Purple) Light Source (Red) Light Source (Green) Light Source (Blue) Light Source (Purple) Light Source (Red) Light Source (Green) Light Source (Black) Light Source (Blue) Light Source (Purple) Light Source (Red) Light Source (Green) Light Source (Blue) Light Source (Purple) Light Source (Red) Light Source (Green) Light Source (Blue) Light Source (Purple) Light Source (Red) Light Source (Green) Light Source (Blue) Light Source (Purple) Light Source (Red) Light Source (Green) Light Source (Blue) Light Source (Purple) Light Source (Red) Light Source ( Green ) Light Source (Blue) - No. 1 Light Source (White) - No. 1 Light Source (Purple) - No. 1 Light Source (Red) - No. 1 Light Source (Blue) - No. 1 Light Source (Purple) - No. 1 Light Source (Blue) - No. 1 Light Source (Purple) - No. 1 Light Source (Blue) - No. 1 Light Source (Purple) - No. 1 Light Source (Blue) - No. 1 Light Source (Purple) - No. 1 Light Source (Blue) - No. 1 Light Source (Purple) - No. 1 Light Source (Blue) Light Source (Purple) Light Source (Blue) Light Source (Purple) Light Source (Blue) Light Source (Purple) Light Source (Blue) Light Source (Purple) Light Source (Blue) Light Source (Purple) Light Source (Blue) Light Source (Purple) Light Source (Blue) Light Source (Purple) Light Source (Blue) Light Source (Purple) Light Source (Blue) Light Source (Purple) Light Source (Blue) Light Source (Purple) Light Source (Blue) Light Source (Purple)

1. Click on the Lighting choose "Light Source (Wi-Fi)"

Select 2.4 GHz Wi-Fi Network and enter password. If your Wi-Fi is 5GHz, please add it to be 2.4GHz. Common Vitic setting method Vitic: 1MHz 2.4GHz: 2.4GHz Vtic Password

1. Select 2.4GHz Wi-Fi network and enter the password

Reset the device If the indicator is already blinking or breathing, please skip the reset step. Turn the device on, off, on, off, and on until the indicator blinks or breathes (the user manual prevails). Confirm the indicator is blinking or breathing Reset Device Step by Step

Reset the device If the indicator is already blowing or breathing, please skip the reset step. Turn the device on, off, on, off, and on until the indicator lights or breathes (the user manual ground). Select the status of the indicator light or hear the beep: Binking or breathing s... Binking or breathing s...

Step 8: To pair the device with LED Smart Strip Light make sure the light is blinks rapidly. Once the light blinks rapidly, the light is in pairing mode. If the light is not blinking rapidly, you can do one of the following steps: A. Switch the light on & off repeatedly for 3 times, with short intervals of less than 2 seconds. B. Tap the 'How to make light blink rapidly' link (as shown on the image to the right) C. You can also enable pairing mode from the Wi-Fi controller. Press and hold the ON/OFF button for 5-7 seconds and wait till you observe the light flashing. Please refer to the instruction section "WI-FI CONTROLLER FUNCTIONS"

Network Modes 1) Smart Mode: Light flashes rapidly. 2) AP mode: Slow flash, once every 2 seconds. Confirm if the light blinks rapidly, select the Wi-Fi network, and enter the password.

Connecting Device Power on the device: 01:58

Step 8: Once you have successfully completed step 10, you will be redirected to below page, where the App searches, registers and initializes the device(lamp) (ref image below).

Device added successfully Light Completed

Step 9: Once your device is successfully added, rename the device to your preference.

Welcome home Set your home location, get more information > All Devices ... Light LongItem

Step 10: You can now start controlling your device with the App. Tap the device name on the home page to enter the controls and features of the device.

Switch 100% White Brightness 100% Dimmer

Step 13: After successfully pairing the lamp with the app, you can start controlling multiple features of the lamp through your mobile-on/off switch, changing the colour temperature, timing & schedules, dimming options, and more.

GOOGLE ASSISTANT SETTINGS

Step 1

• Install the Google Assistant app via the App Store (iOS) or the Play Store (Android) and register. If you already have an existing account with Google Assistant, please proceed to logging in.
• Create a New Home/Choose from the existing home if any.
• Power ON the Google Assistant device and connect it to the App.(Then Proceed to step 2)

Welcome home
Your content and devices all in one place

GET STARTED >
Choose account
This account will be used to personalize your experience

Choose a home
You will be able to control the devices and services in this home.

Create another home

Plug in your device
Make sure your device is nearby and connected to power, then try again

Step 2

- Once you are on the Google home page, tap on the Add "+" icon— to add a new device and skill. And then tap on Set up device as shown in below image.

Office

Office

1 device

Office Speaker
Pause
Add to Home
Set up device
+ Add home member
Create speaker group
Create new home
Add services
Music and audio
Videos and photos

• Step 3: Make sure the Wifi Switch is paired with Smart Life app before starting, Tap on the arrow section as highlighted in the below image.
• Step 4: Type "Smart Life" on the search bar and tap on the icon of "Smart Life"

Set up

Set up new devices or add existing devices and services to your home

New devices

Set up new devices

Google Home, smart displays and devices labelled 'Made for Google' such as C by GE smart bulbs

Works with Google

Have something already set up?

Link your smart home services such as Philips Hue and TP-Link

Smart Life

• Step 5: Sign In with your Smart Life Login credentials to Link the Smart Life device.
• Step 6: Tap on Authorize in order to proceed to linking the device.

+1 Phone Number/Email Address Type your password here Link Now Forgot Password Help

Google will be able to:

Receive your public profile Control your devices over internet

Authorize

Step 7

a. Account will now be linked, please stay on the page you will be redirected in few seconds to select the device to add to your home.
b. Select the device and tap on Next as show in image b.

Done

assistant.google.com

Account is now Linked

×

Choose device

NEXT >

Choose a home

You will be able to control the devices and services in this home.

Smart-Home

Office

Smart Home

Create another home

NEXT>

Step 8: Select the Home where you would like to add the Smart Life under. (Or) you can create a New home in order to add the Smart Life to it.
Step 9: You have successfully added Smart Life device to your Google Assistant App.

Choose a home

You will be able to control the devices and services in this home.

Smart-Home

Office

Smart Home

Create another home

NEXT>

Smart-Home

OFF

Dr

Add

Settings

Master bedroom

home light

Off

。

On

Local devices

1 device

Office Speaker

Step 10

a. You can turn the Lamp On/OFF by taping on On/Off options as shown below. (OR) You can tap on the Smart Lamp.
b. You will be redirected to page(as shown in image b) where you can control the lights "Power and Dimming functionality".

Smart-Home -

Master bedroom

t device

home light

CIF

Local devices

1 device

Office Speaker

home light

Master bedroom

Simple circular diagram with a central white circle and a gold ring, no text or symbols present.

81%

Brightness

Google Commands

Now, you can control your smart device using voice commands on Google Assistant. Below are a few commands you can use:

Ok, Google, turn on/off bedroom light,

Ok, Google, turn on/off Hall light.

THINGS TO REMEMBER BEFORE STARTING INSTALLATION

1. Smart Life App & Google Assistant App Ok, Google, set bedroom light to warm white.
2. Make sure you have Google Assistant Device
3. Smart Device - Lamp
4. Stable Wifi network

ALEXA SETTINGS

Step 1: Install the Amazon Alexa app via the App Store(iOS) or the Play Store (Android) and register. If you already have an existing account with Amazon Alexa, please proceed to logging in.

Step 2: Once you are on the Amazon Alexa home page, tap on the lower right icon — where the arrow is pointed— to add a new device and skill.

amazon alexa Login Forgot password? Mobile number or Email Amazon password Show password LOGIN New to Amazon? CREATE A NEW AMAZON ACCOUNT

A New Way to Manage Devices Set up and control Alexa and smart home devices in one convenient place NEXT

Step 3: Tap on — settings and tap on "skills and games" as shown below.
Step 4: Search for 'Smart Life' on the "Skills & Games" page as shown below.

Add Device Lists Reminders & Alarms Contacts Routines Things to Try Skills & Games

SKILLS & GAMES SEARCH Search Keyword or skill name Smart Life

Step 5: Enable the Skill

Step 6: Enter your Smart Life login ID and password and tap on "Link Now"

Account linking in progress

Forgot Password Help

Step 7: Once you tap on Link Now, you will be redirected to a new page requesting for authorization(Ref Image below). Tap on "Authorize"

Step 8: You will receive confirmation of the account being linked successfully (Ref Image below)

Alexa by Amazon will be able to: Receive your public profile Control your devices over internet Authorize Done skills-store.amazon.in amazon alexa Smart Life has been successfully linked. What to do next: → Close this window to discover smart home devices you can control with Alexa.

Step 9: Discover your smart device on Alexa. Once you have enabled the skill

A) You can use voice command "Alexa discover devices" to the Alexa device which you have.

B) To add device manually on home page tap on which you are adding and tap on discover device.

and tap on Add device, select the device

Add Device Lists Reminders & Alarms Contacts Routines Things to Try Skills & Games

Amazon Echo Light Plug Switch Hub Thermostat Speaker

Note: Discovering the device must be done every time the device's name is changed on the app.

ALEXA COMMANDS

Now, you can control your smart device using voice commands on Alexa.

Below are a few commands you can use:

Hi Alexa, Turn On/Off bedroom light.

Hi Alexa, Turn On/Off Hall Light.

THINGS TO REMEMBER BEFORE STARTING INSTALLATION

1. Smart Life App & Amazon Alexa App
2. Make sure you have Amazon Alexa Device(including Echo, Echo Tap, or Echo Dot)
3. Smart Device - Lamp
4. Stable Wifi network

RoHS C€ UK CA

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: [e-mail] FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: [e-mail] FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC WEST EUROPE LTD. GROUND FLOOR, 71 LOWER BAGGOT STREET, DUBLIN 02, IRELAND DO2 P593

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT PLEASE REACH OUT TO US AT [e-mail] V-TAC HOUSE, KELPATRICK ROAD, SLOUGH, BERKSHIRE, SL1 6BW, UK.