P-STRG-CF - Tripod Proaim - Free user manual and instructions

USER MANUAL P-STRG-CF Proaim

CF Carbon Fiber Star Ring for Handheld Gimbal Camera Stabilizers & Body Support Rigs (P-STRG-CF)

Assembly Manual

Pure geometric frame structure with no text or symbols

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

Top CF Star Ring device with metal frame and mounting bracket (no text or symbols visible)

Top CF Star Ring

4 x Allen Bolts (Size: 4 x 20)

4 x Allen Bolts (Size: 4 x 16)

4 x Allen Bolts (Size: 3 x 12)

4 x Allen Bolts (Size:-3 x 10)

2 x L-type Allen key (Size:- 5mm, 3mm)

Black metal bracket with rounded ends and small protrusions (no text or symbols)

Bottom CF Star Ring

1 x T-type Allen key (Size:-2.5mm)

Black cargo bag labeled 'PROAIM' with a name tag, shown in descriptive text below (no other signage or text visible)

Bag Packing

All rights reserved.

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.

FUNCTION

Quick Release Adapter

Underslung and over-slung mode using the quick-release adapter with M3 and M4 threads

Wide compatibility movi & R2 Quick release plate with additional accessory security, control over your 2-axis and 3-axis gimbals with the adapter

Index Marking

Index marking helps to adjust the positions of spool clamps and adapter.

Spool Clamps Effortlessly attach to most body support rigs and Camera can be move flexible and adjust the positions.

Foot Clamps

Stands in Upright Positions with Addition Mounting

keep the setup upright without using a stand by providing a wide base that does not fall forward or backward.

Scalling

Index marking to enable the operator to efficiently affix the clamps and quick-release adapter where they were the last time they were shooting.

CF Carbon Fiber Star Ring Setup

• Attach the top CF & bottom CF Star Ring.
  NOTE: The portable and travel-friendly design can be detached into two pieces to ensure comfortable carriage to different shooting locations.
• After attaching the Star Ring, tighten the allen bolts it using the 2.5mm Allen key, as shown in the image.
• The Star Ring has sturdy spool clamps that easily attach to most body support rigs.

Features: The Spool clamp can be positioned at the same place where they were the last time you were shooting using the index markings.

• Remove the attached Foot clamp on the Top CF Star ring by loosening it.
• Repeat the same process with the other two foot clamps.

- All three foot clamps have been removed, as shown in the image.

- All three foot clamps have been removed, as shown in the image.

- Attach the foot clamps with the bottom CF Star Ring.

Mechanical bracket with mounting holes and a curved handle (no text or symbols)

Person holding a black mechanical clamp or bracket, no visible text or symbols

Close-up of a hand adjusting a black bicycle tricycle handle (no text or symbols visible)

Close-up of hands holding a yellow object over a black metal pipe (no text or symbols visible)

Close-up of a black mechanical component with a circular end and threaded shaft (no visible text or symbols)

Close-up of a hand adjusting a black mechanical clamp or bracket assembly (no visible text or symbols)

Close-up of a hand adjusting a black mechanical component with a clip (no visible text or symbols)

Mechanical component with three bolts and a handle, no visible text or symbols

Close-up of hands adjusting a black metal bracket with a measuring tool (no text or symbols visible)

Close-up of hands using a tool to adjust or install a black mechanical component (no visible text or symbols)

• After attaching the foot clamps, tighten them using the provided knobs.

Close-up of a hand adjusting a black metal frame with a ruler (no text or symbols visible)

Mechanical component with a looped frame and mounting holes (no text or symbols visible)

Feature: It incorporates foot clamps that keep the setup upright without a stand, providing a broad base that does not fall forward or backward as shown in the picture.

Mechanical bracket with attached fasteners and mounting brackets (no text or symbols visible)

Pure mechanical bracket diagram without any text, numbers, or symbols

Spool Clamps Assembly Inside

• Loosen and remove the bolts using the Allen key.
  Feature: The octagonal ring features index marking to enable the operator to efficiently affix the clamps and quick-release adapter where they were the last time they were shooting.
• Detach the spool clamp from the Star Ring.
• Change the spool clamp's direction by attaching the clamp's outer portion to the inside, as shown in the image.
  • After attaching the spool clamp, insert Allen bolts in it.
• Repeat the same process with the second spool clamp.
• Now, the direction of the spool clamps is on the outside, as shown in the image.

Feature: Its robust spool clamps effortlessly attach to most body support rigs, such as Proaim Hawk Body Support, Hawk Lite Body Support, Gimbal Bird Body Support, and Flycam Flowline Camera Gimbal Tilt Control Kit.

Close-up of a hand adjusting a black mechanical component with a small inset showing a ruler and scale (no text or symbols visible)

Hand holding a screwdriver inserted into a metal ruler (no text or symbols visible)

Close-up of hands adjusting a black mechanical component with a ruler (no visible text or symbols)

Hand holding a black mechanical component against a white background (no text or symbols visible)

Close-up of hands adjusting a mechanical component on a vertical axis (no text or symbols visible)

Close-up of hands using a measuring tool to measure a cylindrical object, no visible text or symbols

Metal frame with attached clamps and connectors (no text or symbols)

Quick Release Adapter Assembly Inside

• To straighten the quick-release adapter on the Top CF Star Ring, loosen all its bolts using the Allen key.
• Detach the quick-release adapter as shown.
• Attach the quick-release plate from the bottom side of the Top CF Star Ring.
• Attach the quick-release adapter.
  • After attaching, re-insert the bolts in the adapter and tighten them using the Allen key.
• Loosen the knob of the quick-release adapter and remove it.

Close-up of a black pipe fitting with attached clamps and bolts (no text or symbols visible)

Hand holding a black cable with a small connector attached (no text or symbols visible)

Close-up of a hand holding a black mechanical component attached to a metal pipe (no text or symbols visible)

Hand holding a black metal bracket with a small component, against a white background (no text or symbols visible)

Hand holding a black plastic connector inside a transparent frame (no text or symbols visible)

Hand holding a small black object attached to a curved black frame (no text or symbols visible)

Close-up of hands adjusting a black metal bracket with a small attached component (no text or symbols visible)

Close-up of hands adjusting a black metal frame with a small clip (no text or symbols visible)

Close-up of hands adjusting a black metal frame with a small clip (no text or symbols visible)

Close-up of hands installing a black cable clip on a metal frame (no text or symbols visible)

Close-up of a hand adjusting a black mechanical component with red arrows pointing to it, shown in two circular insets (no text or symbols visible)

Mechanical bracket component with mounting holes and mounting brackets (no text or symbols visible)

- Insert the bolt in the quick-release plate.

NOTE: It can be used in both underslung and over-slung mode using quick-release adapters with M3 and M4 threads, to which the MOVI quick-release plate and R2 quick-release plate can be mounted, respectively.

• After inserting the bolt, attach the plate with the QR Movi (Not Included).

• After the attachment, secure the quick-release plate using the Allen key.

- Attach the QR Movi with the gimbal (Not Included) and press the locking lever by pressing the lever.

- To attach the gimbal (Not Included), slide the quick-release plate onto the Star Ring and tighten the knob to secure the setup.

- Slide the Camera (Not Included) onto the quick-release plate of the gimbal.

NOTE: Unlock unmatched stability and control over your 2-axis and 3-axis gimbals with the Handheld CF Star Ring,

Close-up of hands assembling a black plastic mechanical component (no visible text or symbols)

Close-up of hands holding a black plastic mechanical component with multiple holes (no text or symbols visible)

Close-up of hands holding a black plastic component with a small square base (no text or symbols visible)

Close-up of hands holding a black mechanical component with a ruler, no visible text or symbols

Close-up of hands assembling a black plastic housing with a tool (no visible text or symbols)

Metal mechanical component with multiple holes and a curved base (no visible text or symbols)

Close-up of hands assembling or adjusting a mechanical assembly (no visible text or symbols)

Close-up of hands adjusting a camera module mounted on a tripod (no visible text or symbols)

Close-up of hands operating a black mechanical device with a camera module (no visible text or symbols)

Close-up of a hand adjusting a black mechanical component with wires and a curved pipe (no visible text or symbols)

Close-up of a black rectangular optical setup with a central frame and a hand adjusting it (no visible text or symbols)

Close-up of a hand holding a black DSLR camera frame with no visible text or symbols

• After mounting the Camera (Not Included), press the locking lever from the bottom side to secure the Camera.

Close-up of a person adjusting a DSLR camera frame with a clip (no visible text or symbols)

Close-up of a DSLR camera with dual lenses mounted on a stand (no visible text or symbols)

- The Star Ring offers enhanced support and flexibility, allowing gimbal operators to achieve more stable control over their camera gimbals to achieve professional-quality shots consistently.

Mechanical assembly inside a rectangular frame with mounting brackets (no visible text or symbols)

YOUR PROAIM CF CARBON FIBER STAR RING FOR HANDHELD GIMBAL CAMERA STABILIZERS & BODY SUPPORT RIGS ALL DRESSED UP AND READY TO GO!

Person holding a large mechanical rig with a camera module, wearing a black headset and visor (no visible text or symbols)

(SHOWN WITH OPTIONAL ACCESSORIES)

Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn't cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.

Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.

Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.