VT-1147 - Lighting V-TAC - Free user manual and instructions

USER MANUAL VT-1147 V-TAC

WEEE Number: 80133970

INSTRUCTION MANUAL

SOLAR LED WALL LIGHT WITH SENSOR

TECHNICAL DATA

MODEL VT-1147
SKU 10402
LUMENS 220 Lm
SOLAR PANEL	DC 5.5V, 1.8W Polycrystalline
BATTERY	2200mAh, Li-Ion, DC: 3.7V
CHARGING TIME 8-10 Hour	s
WORKING TIME 6-8 Hours
BULB WATTS 5.5 W
COLOR TEMPERATURE 3000K
SENSOR TYPE PIR Sensor
SENSOR DEGREE	90-110°
DIMENSION	155x299x130mm
MATERIAL	Aluminium+PC

1.8W Polycrystalline h, Li-Ion, DC: 3.7V s

IP54 RATING

03 YEAR WARRANTY®

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

QR code image containing encoded data, no visible human-readable text

MULTI-LANGUAGE MANUAL QR CODE

Please scan the QR code to access the manual in multiple languages.

WARNING

1. Please make sure to turn off the power before starting the installation.
2. Installation should be done by certified electrician.

This marking indicates that this product should not be disposed of with other household wastes.

INSTALLATION DIAGRAM

Technical line drawing of a kitchen appliance with no visible text or symbols

Simple line drawing of a rectangular panel with three small circles and a hand holding a tool, no text or symbols present.

Diagram showing installation of a wall socket with screw and screwdriver components (no text or labels)

Technical line drawing of a wall-mounted electrical cabinet with mounting bracket (no text or symbols)

Simple line drawing of a solar-powered LED unit with a sun emission indicator (no text or symbols)

1.8-2.2M ON OFF 100° 2-7M

High Light High LightLow Light Standby Time

1. Mode A: Long press 3s start (Turn on) Low light.

2. Mode B: When sensor on high light 25s, then low light.

3. Mode C: When sensor on high light 25s, then standby time.

4. Mode D: (Turn off)

INSTALLATION INSTRUCTION

1. Drill two holes on the wall and insert two plastic expansion bolts in it.
2. Fix the metal plate on the plastic expansion piece with self-tapping screws.
3. Fix the lamp body on the plate and tighten the screws.
4. Switch on and test.

FUNCTION OF SENSOR

1. Long press 3s start (turn on) low light10%
2. Turns 100% brightness when motion is detected and 10% light when people go away
3. Turns 100% brightness when motion is detected and light turn off when no one come in.
4. Turn off.

MAINTENANCE & WARNING

• Do not use solvents, petrol, etc. Otherwise the light will be damaged.
• Clean the light with a dry, lint-free cloth.
• Check the solar panel for dirt regularly. If dirt or is present remove it to guarantee flawless function of the product.
• Especially during the winter, keep the product free from snow and ice.
• Confirm installation direction is correct (solar panel should be at top)
• Confirm no objects blocking the solar panel to receive sunlight
• Keep away from the fire.
• Don't immerse in the water

INSTRUCTION MANUAL

SOLAR LED WALL LIGHT WITH SENSOR

TECHNICAL DATA

MODEL VT-1147
SKU 23016
LUMENS 220 Lm
SOLAR PANEL	DC 5.5V, 1.8W Polycrystalline
BATTERY	2200mAh, Li-Ion, DC: 3.7V
CHARGING TIME 8-10 Hours
WORKING TIME 6-8 Hours
BULB WATTS 5.5 W
COLOR TEMPERATURE 3000K
SENSOR TYPE PIR Sensor
SENSOR DEGREE	90-110°
DIMENSION	155x299x155mm
MATERIAL	Aluminium+PC

W Polycrystalline i-lon, DC: 3.7V

IP54 RATING

03 YEAR WARRANTY®

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

QR code image containing encoded data, no visible human-readable text

MULTI-LANGUAGE MANUAL QR CODE

Please scan the QR code to access the manual in multiple languages.

WARNING

1. Please make sure to turn off the power before starting the installation.
2. Installation should be done by certified electrician.

This marking indicates that this product should not be disposed of with other household wastes.

INSTALLATION DIAGRAM

Technical line drawing of a mechanical device with no visible text or symbols

Simple line drawing of a rectangular panel with three small circles and a separate hand holding a screwdriver (no text or symbols)

Diagram showing screwdriver installation into a rectangular component with a hole, alongside a separate screwdriver and a flat panel (no text or symbols)

Technical line drawing of a mechanical device with mounting bracket and side panel (no text or symbols)

Diagram of a solar-powered streetlight fixture with a sun beam and control panel (no text or symbols)

1.8-2.2M ON OFF 100° 2-7M

High Light High LightLow Light Standby Time

1. Mode A: Long press 3s start (Turn on) Low light.

2. Mode B: When sensor on high light 25s, then low light.

3. Mode C: When sensor on high light 25s, then standby time.

4. Mode D: (Turn off)

INSTALLATION INSTRUCTION

1. Drill two holes on the wall and insert two plastic expansion bolts in it.
2. Fix the metal plate on the plastic expansion piece with self-tapping screws.
3. Fix the lamp body on the plate and tighten the screws.
4. Switch on and test.

FUNCTION OF SENSOR

1. Long press 3s start (turn on) low light10%
2. Turns 100% brightness when motion is detected and 10% light when people go away
3. Turns 100% brightness when motion is detected and light turn off when no one come in.
4. Turn off.

MAINTENANCE & WARNING

• Do not use solvents, petrol, etc. Otherwise the light will be damaged.
• Clean the light with a dry, lint-free cloth.
• Check the solar panel for dirt regularly. If dirt or is present remove it to guarantee flawless function of the product.
• Especially during the winter, keep the product free from snow and ice.
• Confirm installation direction is correct (solar panel should be at top)
• Confirm no objects blocking the solar panel to receive sunlight
• Keep away from the fire.
• Don't immerse in the water