H499-BG - Wall mount WindFall - Free user manual and instructions

USER MANUAL H499-BG WindFall

Assembly & Installation

Line drawing of a rectangular electronic device with a screen and handle (no text or symbols)

Compatible with:

Samsung Galaxy Tab A 10.1

Limited Warranty

Heckler Design warrants your product to be free from defect in material and workmanship for a period of two years from the original date of purchase. Electronic components are warranted to be free from defect for a period of one year from the original date of purchase. If you discover a defect, please contact [e-mail]. Heckler Design will repair, at our discretion, using new or refurbished components. If repair is not possible, Heckler Design will replace the item.

1x

M3 Hex Key F529

2x

Thread-Forming Mounting Screw F486

Keep your special assembly tool in a safe place. To purchase a replacement, please contact [e-mail].

Line drawing of a screwdriver and a circular component (no text or symbols)

Phillips Head Screwdriver

Line drawing of a handheld electric drill (no text or symbols)

Drill

Marker

WindFall Side Mount for Galaxy Tab A 10.1

Installation Instructions and Template

Important Note: A minimum 1.5 inch (38mm) set back from mullion face to the glass is required for an optimal installation in which the front face of the enclosure is flush with the front face of the mullion. BEFORE INSTALLATION Mullion Door Frame Glass Mullion Door Frame Glass The top of the screen. ADA Compliance Guideline For ADA compliance, the center of the Ethernet cable hole should be no higher than 45.25 inches above the ground. Creating The Ethernet Cable Hole If your Ethernet cable has an RJ45 connec- tor installed, drill a 5/8 inch hole in the position shown. If you will install an RJ45 connector after the Ethernet cable is drawn through the mullion, a smaller hole can be created. Selecting Your Mounting Screw Positions To accommodate various mullion styles, multiple screw hole positions are available. Please select the mounting positions that work best for your mullion. You may use any screw you see fit for mounting the product to the mullion. If you choose to use the self-tapping mounting screws provided, we recommend drilling a pilot hole with a #17 drill bit or a 5/32-inch drill bit. Ground After INSTALLATION 7.1 inch (180 mm) Ground Note: Drawing is not to scale.

1 Disassemble Side Mount

Technical diagram showing mechanical assembly with two views of a component and directional arrow indicating motion or force.

2 Remove Mounting Bracket From Front Bezel

Technical line drawing of a mechanical component with mounting holes and a central bracket (no text or symbols)

Mark Hole Positions3

Please select the mounting positions that work best for your mullion.

4 Drill Mounting Holes

You may use any screw you see fit for mounting the product to the mullion. If you choose to use the self-tapping mounting screws provided, we recommend drilling a pilot hole with a #17 drill bit or a 5/32-inch drill bit.

5 Form Mounting Hole Threads

The mounting screws provided are thread-forming screws.

Ethernet Cable Hole

If your Ethernet cable has an RJ45 connector installed, drill a 5/8 inch hole in the position shown.

If you will install an RJ45 connector after the Ethernet cable is drawn through the mullion, a smaller hole can be created.

Line drawing of a hand tool projecting onto a door panel with two circular buttons and a dotted circle on the key (no text or symbols)

6 Remove Mounting Screws

Diagram showing a drill bit with a compass tool and a circular motion indicator, illustrating the working principle of a drill.

7 Fasten Mounting Bracket to mullion

Technical diagram showing a mechanical assembly with labeled parts and a circular arrow indicating rotation or adjustment.

8 Charging Options

PoE Splitter (Power Only)

Pure electrical circuit lines without any symbols

Battery Bank

Technical line drawing of a mechanical assembly with mounting brackets and a central rectangular component (no text or symbols)

9 Install Tablet

Technical line drawing of a mechanical component with a central arrow indicating direction (no text or symbols)

10 Install Front Bezel

Technical line drawing of a mechanical component with a directional arrow indicating motion (no text or symbols)

11 Slide Front Bezel Onto Mounting Bracket

Technical diagram showing a device panel with directional arrows and close-up insets of the component detail

12 Tighten Assembly Screws

4x