24V-PP350-RM - Washing machine Sun Joe - Free user manual and instructions

USER MANUAL 24V-PP350-RM Sun Joe

A Division of Snow Joe ^13 , LLC

CORDLESS PORTABLE

POWER CLEANER

24-VOLT MAX* | 350 PSI MAX† | 0.6 GPM MAX†

Model 24V-PP350-LTE-RM

Form No. SJ-24V-PP350-LTE-RM-880E-V1

THANKS FOR YOUR PURCHASE OF A REMANUFACTURED PRODUCT.

To make sure you get the most out of your product, be sure to register online at

snowjoe.com

to enjoy full product support.

OPERATOR'S MANUAL

A Division of Snow Joe ^10 , LLC

CORDLESS PORTABLE

POWER CLEANER

24-VOLT MAX* | 350 PSI MAX ^ | 0.6 GPM MAX ^

IMPORTANT!

Safety Instructions

All Operators Must Read These Instructions Before Use

⚠ WARNING! This indicates a hazardous situation, which, if not avoided, could result in death or serious injury.

⚠️CAUTION! This indicates a hazardous situation, which, if not avoided, could result in minor or moderate injury.

⚠️DANGER! This indicates a hazardous situation, which, if not followed, will result in death or serious injury.

General Safety

WARNING! This appliance is not intended for use by children or by unassisted, unsupervised persons whose physical, sensory or mental capabilities prevent them from using it safely. Children should be supervised to ensure that they do not play with the appliance.

Before starting up your machine, please check it carefully for any defects. If you find any, do not start up your machine. Contact your authorized Snow Joe ^® + Sun Joe ^® dealer or call the Snow Joe ^® + Sun Joe ^® customer service center at

Model 24V-PP350-LTE-RM

• Stay alert – Watch what you are doing. Use common sense. Do not operate the power cleaner when you are tired, or under the influence of alcohol or drugs.
• Do not overreach – Keep proper footing and balance at all times.
• Avoid unintentional starting – Do not carry a machine with power with your finger on the trigger. Make sure the switch is off before inserting the battery.
• Remove the battery – Remove the battery from the power cleaner when it is not in use, before servicing it, when changing accessories, and when performing any other maintenance task.
• Use safety glasses – Also use safety footwear, snug-fitting clothing, protective gloves, hearing and head protection.
• Check the water temperature – This power cleaner is not meant to pump hot water. NEVER connect it to a hot water supply as it will significantly reduce the life of the pump.
• Store indoors – NEVER store the power cleaner outdoors or where it could freeze. The pump could be seriously damaged.

⚠ WARNING! Do not use this appliance without reading this instruction manual.

⚠ WARNING! This appliance has been designed for use with cleaning agents that are recommended by the manufacturer. The use of other cleaning agents or chemicals may adversely affect the safety of the appliance.

⚠ WARNING! During cleaning, maintenance or when replacing parts, the machine must be disconnected from its power source by removing the battery.

WARNING! High-pressure hoses, fittings, and couplings are important for the safe operation of the appliance. Use only hoses, fittings, and couplings recommended by the manufacturer.

WARNING! Electrical Shock Hazard – Before starting up your machine, please check it carefully for any defects. If you find any, do not start up your machine and contact your distributor.

IMPORTANT: Do not connect the machine to water supply which is turbid, muddy or corrosive. Not recommended for use with salt water, immediately rinse with fresh water for proper maintenance.

• Check for damaged parts – Do not use the appliance if any important parts of the appliance are damaged.
• This cordless power cleaner must not be used at temperatures below 32^ (0°C).
• In the event of an accident or breakdown, switch off the machine immediately. (If contact with detergent occurs, rinse with an abundance of clean water.)

Electric Safety

⚠ WARNING! Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

1. Prevent unintentional starting. Ensure the switch is in the off-position before connecting with the battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing an appliance with a tool, allowing it to be used for the switch.

medical help. Liquid ejected from the battery may cause irritation or burns.

1. Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
2. Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 265°F (130°C) may cause explosion.
3. Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
4. Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
5. Do not modify or attempt to repair the appliance or the battery pack (as applicable) except as indicated in the instructions for use and care.

Battery + Charger Safety Instructions

We pay a great deal of attention to the design of every battery pack to ensure that we supply you with batteries that are safe, durable and have a high energy density. The battery cells have a wide range of safety devices. Each individual cell is initially formatted and its electrical characteristic curves are recorded. This data is then used exclusively to be able to assemble the best possible battery packs.

Despite all the safety precautions, caution must always be exercised when handling the battery. The following points must be obeyed at all times to ensure safe use. Safe use can only

⚠️CAUTION! To reduce the risk of injury, charge the 24V iON+ lithium-ion battery pack only in the designated 24V iON+ lithium-ion charger. Other types of chargers present risk of fire, personal injury and damage. Do not wire the battery pack to a power supply plug or car cigarette lighter. Such misuse will permanently disable or damage the battery pack.

• Avoid dangerous environments – Do not charge the battery pack in rain, snow or in damp or wet locations. Do not use the battery pack or charger in the presence of explosive atmospheres (gaseous fumes, dust or flammable materials) because sparks may be generated when connecting or disconnecting the battery pack, which could lead to a fire.
• Charge in a well-ventilated area – Do not block the charger vents. Keep them clear to allow for proper ventilation. Do not allow smoking or open flames near a charging battery pack. Vented gases may explode.

NOTE: The safe temperature range for the battery is 41^ F – 105^ F ( 5^ C – 40.5^ C). Do not charge the battery outside in freezing weather; charge it at room temperature.

• Maintain charger cord – When unplugging the charger, pull the plug, not the cord, from the receptacle to reduce the risk of damage to the electrical plug and cord. Never carry the charger by its cord or yank it by the cord to disconnect it from the receptacle. Keep the cord away from heat, oil and sharp edges. Make sure the cord will not be stepped on, tripped over or subjected to damage or stress when the charger is in use. Do not use the charger with a damaged cord or plug. Replace a damaged charger immediately.

• Do not use an extension cord unless it is absolutely necessary – Using the wrong, damaged or improperly wired extension cord poses a risk of fire and electric shock. If an extension cord must be used, plug the charger into a properly wired 16 gauge or larger extension cord with the female plug matching the male plug on the charger. Make sure that the extension cord is in good electrical condition.

• Do not crush, drop or damage battery pack – Do not use the battery pack or charger if they have sustained a sharp blow, been dropped, run over or have been damaged in any way (i.e. pierced with a nail, hit with a hammer, stepped on, etc.).

• Do not disassemble – Incorrect reassembly may pose a serious risk of electric shock, fire or exposure to toxic battery chemicals. If the battery or charger are damaged, contact an authorized Snow Joe ^® + Sun Joe ^® dealer or call the Snow Joe ^® + Sun Joe ^® customer service center at 1-866-SNOWJOE (1-866-766-9563) for assistance.
• Battery chemicals cause serious burns - Never let a damaged battery pack contact the skin, eyes or mouth. If a damaged battery pack leaks battery chemicals, use rubber or neoprene gloves to safely dispose of it. If skin is exposed to battery fluids, wash the affected area with soap and water and rinse with vinegar. If eyes are exposed to battery chemicals, immediately flush with water for 20 minutes and seek medical attention. Remove and dispose of contaminated clothing.
• Do not short circuit – A battery pack will short circuit if a metal object makes a connection between the positive and negative contacts on the battery pack. Do not place a battery pack near anything that may cause a short circuit, such as paper clips, coins, keys, screws, nails and other metallic objects. A short-circuited battery pack poses a risk of fire and severe personal injury.
• Store your battery pack and charger in a cool, dry place – Do not store the battery pack or charger where temperatures may exceed 105°F (40.5°C), such as in direct sunlight or inside a vehicle or metal building during the summer.

Information about the battery

1. The battery pack supplied with your cordless power cleaner is only partially charged. The battery pack has to be charged completely before you use the tool for the first

soon as the performance of the battery fall noticeably or the electronic protection system triggers. Place the battery pack in storage only after it has been fully charged.

1. Protect the battery and the tool from overloads. Overloads will quickly result in overheating and cell damage inside the battery housing even if this overheating is not apparent externally.

2. Avoid damage and shocks. Immediately replace the battery that has been dropped from a height of more than one meter or has been exposed to violent shocks, even if the housing of the battery pack appears to be undamaged. The battery cells inside the battery may have suffered serious damage. In such instances, please read the waste disposal information for proper battery disposal.

3. If the battery pack suffers overloading and overheating, the integrated protective cutoff will switch off the equipment for safety reasons.

IMPORTANT! Do not press the ON/OFF switch any more if the protective cut-off has been activated. This may damage the battery pack.

1. Use only original battery pack. The use of other batteries poses a fire risk and may result in injuries or an explosion.

Information about the charger and the charging process

1. Please check the data marked on the rating plate of the battery charger. Be sure to connect the battery charger to a power supply with the voltage marked on the rating plate. Never connect it to a different mains voltage.
2. Protect the battery charger and its cord from damage. Keep the charger and its cord away from heat, oil and sharp edges. Have damaged cords repaired without delay by a qualified technician at an authorized Snow Joe ^® + Sun Joe ^® dealer or call the Snow Joe ^® + Sun Joe ^® customer service center at 1-866-SNOWJOE (1-866-702-9588).

has already suffered dangerous damage (exhaustive discharge).

1. Charging the battery at a temperature below 41^ F ( 5^ C) will cause chemical damage to the cells and may cause a fire.
2. Do not use batteries that have been exposed to heat during the charging process, as the battery cells may have suffered dangerous damage.
3. Do not use the battery if it suffered curvature or deformation during the charging process or exhibit other atypical symptoms (gassing, hissing, cracking, etc.).
4. Never fully discharge the battery pack (maximum recommended depth of discharge is 80%). A complete discharge of the battery pack will lead to premature aging of the battery cells.

Protection from environmental influences

1. Wear suitable work clothes. Wear safety goggles.
2. Protect your cordless tool and the battery charger from moisture and rain – Moisture and rain can cause dangerous cell damage.
3. Do not use the cordless tool or the battery charger near vapors and flammable liquids.
4. Use the battery charger and cordless tools only in dry conditions and at an ambient temperature of 41^ F – 105^ F ( 5^ C – 40.5^ C).
5. Do not keep the battery charger in places where the temperature is liable to reach over 105^ F ( 40.5^ C). In particular, do not leave the battery charger in a car that is parked in the sunshine.
6. Protect batteries from overheating. Overloads, overcharging and exposure to direct sunlight will result in overheating and cell damage. Never charge or work with batteries that have been overheated – replace them immediately if possible.

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate.

Symbols SymbolsDescriptions Descriptions
	READ THE OPERATOR'S MANUAL(S) – Read, understand, and follow all instructions in the user manual(s) before attempting to assemble and operate.		SAFETY ALERT – Indicates a precaution, a warning, or a danger.
	WARNING! Do not expose the unit to rain or wet conditions. Keep dry.		WEAR EYE AND HEARING PROTECTION – For protection against injury, wear ear defenders and safety goggles.
	To reduce the risk of injury, user must keep all bystanders at least 49 ft (15 m) away.		Machine not suitable for connection to the potable water mains.
	Wear safety gloves during use to protect hands.		Wear non-slip footwear that will protect your feet and improve your footing on slippery surfaces.

Know Your Cordless Portable Power Cleaner

Read the owner's manual and safety instructions carefully before operating the cordless portable power cleaner. Compare the illustration below to the cordless portable power cleaner in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

Technical diagram of a handheld device with numbered parts for identification and assembly reference.

Technical Data

Battery Voltage ^* 24 V D.C.

Battery Capacity 2.0 Ah

Battery Run Time Max 12 min

Charger Input 100 - 240 V AC, 50/60 Hz, 0.4 A

Charger Output 26 V DC =450 mA

Charge Time Max 5 hours

Motor 180 W brush

Max Water Inlet Temperature 104°F/40°C

Siphon Hose Length 20 ft (6 m)

Max Water Inlet Pressure 0.6 MPa

Max Flow ^ 0.6 GPM

Rated Flow 0.55 GPM

Max Pressure ^1 350 PSI

Rated Pressure 320 PSI

(connecting with spigot)

275 PSI

(connecting with

fresh/bucket water)

Nozzle Patterns.... 5

Extension Wand Length.... 11.9 inch (30.2 cm)

Nozzle Wand Length.... 11.6 inch (29.5 cm)

Weight (unit only) 5.5 lbs (2.5 kg)

Weight (with battery installed) 6.8 lbs (3 kg)

* Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage under typical load is 21.6 volts.

^1 Max rating per CSA test standards. Maximum internal pressure is 350 PSI and flow is 0.6 GPM. Under typical load, working pressure is 320 PSI and flow is 0.55 GPM.

Unnacking

1. Carefully remove the power cleaner and check to see that all of the above items are supplied.

2. Inspect the product carefully to make sure no breakage or damage occurred during shipping. If you find damaged or missing parts, DO NOT return the unit to the store. Please call the Snow Joe ^x + Sun Joe ^x customer service center at 1-866-SNOWJOE (1-866-766-9563).

NOTE: Do not discard the shipping carton and packaging material until you are ready to use your new cordless power cleaner. The packaging is made of recyclable materials. Properly dispose of these materials in accordance with local regulations.

IMPORTANT! The equipment and packaging material are not toys. Do not let children play with plastic bags, foils, or small parts. These items can be swallowed and pose a suffocation risk!

⚠ WARNING! Do not insert the battery until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.

Battery Pack Operation

The equipment is powered by a lithium-ion battery. The battery pack is completely sealed and maintenance free.

Battery Charge Level Indicator

The battery pack is equipped with a push button for checking the charge level. Simply press the push button to read off the battery charge level from the LEDs of the battery indicator:

• All 3 level monitoring LEDs are lit: Battery charge level is high.
• 2 level monitoring LEDs are lit: Battery charge level is decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is flat. Stop work

NOTE: If the charge level button does not appear to be working, connect to the charger and charge as needed.

NOTE: Immediately after using the battery pack, the charge level button may display a lower charge than it will if checked a few minutes later. The battery cells "recover" some of their charge after resting.

Charger Operation

⚠ WARNING! Charge only 24V iON+ lithium-ion battery pack with its compatible 24V iON+ lithium-ion charger. Other types of batteries may cause personal injury and damage.

To reduce the risk of electric shock, do not allow water to flow into the charger's AC/DC plug.

When to Charge the iON+ 24VBAT-LTE Lithium-iON Battery

NOTE: The iON+ 24VBAT-LTE lithium-iON battery pack does not develop a "memory" when charged after only a partial discharge. Therefore, it is not necessary to run down the battery pack before inserting the charger plug.

• Use the battery indicator lights to determine when to charge your ION+ 24VBAT-LTE lithium-ION battery pack.
• You can "top-off" your battery pack's charge before starting a big job or after a long day of use.

Charging the Battery

1. Open the battery compartment cover, and push the push lock buttons on the battery to pull the battery pack out from the battery compartment (Fig. 1).

Fig. 1

Fig. 2

g. 2 Battery indicators 800Ω BIO-500S

1. The battery will take approximately 5 hours to charge. The battery indicator LEDs will twinkle and illuminate one by one during the charging process. Unplug the charger immediately when the 3 LEDs are all illuminated.

⚠️CAUTION! FIRE HAZARD. When disconnecting the charger from the battery, be sure to unplug the charger from the outlet first, then disconnect the charger from the battery.

WARNING! This charger does not automatically turn off when the battery is fully charged. Please take care not to leave the battery plugged into the charger. Switch off or unplug the charger at the mains when charging is complete.

1. Timely recharging of the battery will help prolong the battery's life. You must recharge the battery pack when you notice a drop in the equipment's power.

Wands Assembly

NOTE: The portable power cleaner is equipped with two wands: the spray wand and the extension wand. To connect the wands, follow the instruction below.

1. First, fit the extension wand into the gun firmly by aligning the two tabs on the wand with the grooves in the gun, and rotate it clockwise until the two parts are completely locked (Fig. 3).

Fig. 3 Tab Extension wand

1. Attach the spray wand into the extension wand by the same method (Fig. 4).

Fig. 4 Extension wand Spray wand

Connect to Water Source

The power cleaner can be connected with spigot by a regular garden hose with the included garden hose adapter, and can be connected with fresh water or bucket water with the included siphon hose.

CAUTION! The power cleaner must only be used with clean (fresh) water; use of unfiltered water containing corrosive chemicals will damage the power cleaner.

WARNING! When connecting with fresh water (lake, spring, pond) make sure to use the equipped siphon hose. The siphon hose has a filter on the end, which will filter out dirt from fresh water sources.

WARNING! The intake water temperature must not exceed 104°F/40°C.

To connect with fresh water/bucket water

1. To connect the equipped siphon hose with the power cleaner, pull down the collar of the quick connector and fit it onto the adapter. Release the collar to lock the hose in place (Fig. 5).

Fig. 5 Hose adapter Collar

Fig. 6 Siphon hose adapter Garden hose adapter Garden hose

1. Attach the other end of the garden hose to water supply (Fig. 7).

Fig. 8 Battery compartment cover Battery

1. If connected with a spigot, turn the water supply tap on completely.

Fig. 7 Connect to water supply Garden hose

1. Push the safety lock on the spray gun handle, with the safety lock pressed, engage the trigger for a few seconds until the water flow is steady (Fig. 9).
   

Fig. 9 Safety lock button On/Off trigger

WARNING! Keep hose away from sharp objects. Bursting hoses may cause injury. Examine hoses regularly and replace if damaged. Do not attempt to mend a damaged hose.
WARNING! Water that has flowed through back flow preventers is considered to be non-notable
Using the Multi-spray Nozzle

1. Select the right spray pattern for the job (Fig. 10).
   

Fig. 10 0° 0+ 25° 40°

1. Twist the nozzle collar to align the symbol of the desired spray pattern with the mark on the nozzle (Fig. 11).
   

Fig. 11 Align with the mark Multi-spray nozzle

1. Insert the battery and start the machine. Start at the top of the area to be rinsed and work your way down, making sure to overlap your strokes.

Using the Feather Bristle Utility Brush Attachment

The equipped feather bristle utility brush attachment safely cleans painted, topcoat, and delicate surfaces. Follow the instructions below to assemble the brush attachment.

1. Remove the wand connected to the power cleaner by pushing the wand firmly inward and rotating it counterclockwise at the same time, and then pull out from the cleaner (Fig. 12).

Fig. 12

I) The 0^ intense-jet spray pattern is an extremely powerful nozzle that delivers a high-pressure, pencil-point jet stream. It is used to cut heavy dirt deposits in a small, concentrated area. It is ideal for dissolving stubborn substances, like tar and grease spots on concrete, or for removing caked mud from equipment. Use this pattern to clean hard-to-reach areas including the facades of 2-story buildings or the undersides of lawn mowers and tractors.
NOTE: Care should be used when choosing the right spray pattern to avoid permanently gouging wood or damaging fragile surfaces.
II) Use the 0+ spray pattern for intense cleaning jobs on hard surfaces. Applications include stripping paint, removing oil stains, grease, heavy mildew stains, and rust from steel. This pattern should only be used in areas that can withstand the high-pressure from this pattern.

10.11 1 6757 1

Fig. 13 Feather bristle utility brush attachment

1. If needed, use the extension wand to connect the power cleaner and the utility brush attachment (Fig. 14).
   

Fig. 14 Feather bristle utility brush attachment Extension wand

Shutting Down

1. Release the trigger. Remove the battery.
2. Remove the siphon hose out from the bucket/fresh water or turn off the water source.
3. Disconnect the siphon/garden hose connection on the power cleaner.

Maintenance

⚠️CAUTION! Before working on the power cleaner, remove the battery from the compartment.

1. To ensure good performance, check and clean the water inlet filter on the end of the siphon hose. Remove and disassemble the filter and rinse all components with warm water to prevent any foreign matter from clogging the pump (Figs. 15 - 16).

Fig. 15 Siphon hose

Fig. 16

Disposal

Recycling the Cleaner

• Do not dispose of appliances as unsorted municipal waste. Use separate collection facilities.
• Contact your local government agency for information regarding the collection systems available.
• If appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
• When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposal at least free of charge.

Recycling + Disposal

The product comes in a package that protects it against damage during shipping. Keep the package until you are sure that all parts have been delivered and the product is functioning properly. Recycle the package afterwards or keep it for long-term storage.

Battery Caution + Disposal

Always dispose of your battery pack according to federal, state, and local regulations. Contact a recycling agency in your area for recycling locations.

⚠️CAUTION! Even discharged battery packs contain some energy. Before disposing, use electrical tape to cover the terminals to prevent the battery pack from shorting, which could cause a fire or explosion.

⚠ WARNING! To reduce the risk of injury or explosion, never burn or incinerate a battery pack even if it is damaged,

Service + Support

If your Sun Joe ^8 24V-PP350-LTE-RM cordless portable power cleaner requires service or maintenance, please call the Snow Joe ^9 + Sun Joe ^50 customer service center at 1-866-SNOWJOE (1-866-766-9563).

Model + Serial Numbers

When contacting the company, reordering parts, or arranging service from an authorized dealer, you will need to provide the model and serial numbers, which can be found on the decal located on the housing of the unit. Copy these numbers into the space provided below.

Record the following numbers from the housing or handle of your new product: Model #: 2 4 V - P P 3 5 0 - L T E - R M | Serial #:

24V iON+ Lithium-Ion

Charger (XZ2600-0450)

Federal Communications Commission (FCC)

WARNING! Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Class B device:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Optional Accessories

⚠ WARNING! ALWAYS use only authorized Snow Joe® + Sun Joe® replacement parts and accessories. NEVER use replacement parts or accessories that are not intended for use with this cordless power cleaner. Contact Snow Joe® + Sun Joe® if you are unsure whether it is safe to use a particular replacement part or accessory with your power cleaner. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.

				ModelAcc
1			24V iON+ 2.0 Ah Lithium-Ion BatteryBattery Charge Time Max:24VCHRG-QC: 55 min | 24VCHRG-DPC: 55 minBattery Runtime Max: 12 min	24VBAT-LTE
2			24V iON+ 2.5 Ah Lithium-Ion BatteryBattery Charge Time Max:24VCHRG-QC: 1 hr 10 min | 24VCHRG-DPC: 1 hr 10 minBattery Runtime Max: 15 min	24VBAT-LT
3			24V iON+ 4.0 Ah Lithium-Ion BatteryBattery Charge Time Max:24VCHRG-QC: 1 hr 50 min | 24VCHRG-DPC: 1 hr 50 minBattery Runtime Max: 24 min	24VBAT
4			24V iON+ 5.0 Ah Lithium-Ion BatteryBattery Charge Time Max:24VCHRG-QC: 2 hr 20 min | 24VCHRG-DPC: 2 hr 20 minBattery Runtime Max: 30 min	24VBAT-XR
5			24V iON+ Lithium-Ion Battery Quick Charger 24VCHRG-QC
6

			ModelAccess
7		Sun Joe® Replacement Siphon Hose	24V-PP350-WH
8		Sun Joe® Utility Brush Attachment	24V-PP350-UB
9	[4H7]	Sun Joe® Garden Hose Attachment	24V-PP350-HA
10		Sun Joe® Detergent Attachment	24V-PP350-D8
-		Storage Bag	24V-PP350-BAG

NOTES

SNOW JOE® + SUN JOE® REFURBISHED GOODS WARRANTY

GENERAL CONDITIONS:

Snow Joe ^® + Sun Joe ^™ operating under Snow Joe ^® , LLC warrants this refurbished product to the original purchaser for 90 days against defects in material or workmanship when used for normal residential purposes. If a replacement part or product is needed, it will be sent free of charge to the original purchaser except as noted below.

The duration of this warranty applies only if the product is put to personal use around the household. It is the owner's responsibility to correctly perform all maintenance and minor adjustments explained in the owner's manual.

HOW TO OBTAIN YOUR REPLACEMENT PART OR PRODUCT:

To 9obtain 9a 9replacement 9part 9or 9product, 9please 9visit snowjoe.com/help or email us at [e-mail] for instructions. Please be sure to register your unit beforehand to speed up this process. Certain products may require a serial number, typically 9found 9on 9the 9decal 9affixed 9to 9the 9hous or guard of your product. All products require a valid proof of purchase.

EXCLUSIONS:

- 9Wearing 9parts 9like belts, 9augers, 9chains 9and tines 9are not covered under this warranty. Wearing parts can be purchased at snowjoe.com or by calling 1-866-SNOWJOE (1-866-766-9563).

• 6 Batteries Bare Recovered Air Afull 0for 900 days 0from 9the 0d1

Snow Joe ^6 + Sun Joe ^6 may from time to time change the design of its products. Nothing contained in this warranty shall be construed as obligating Snow Joe ^6 + Sun Joe ^6 to incorporate such design changes into previously manufactured products, nor shall such changes be construed as an admission that previous designs were defective.

This warranty is intended to cover product defects only. Snow Joe®, 9LLC 9is 9not 9liable 9for 9indirect, incidental 9or consequential damages in connection with the use or misuse of the Snow Joe® + Sun Joe® products covered by this warranty. This 9warranty 9does 9not 9cover 9any 9cost 9or 9expense 9incurred by the purchaser in providing substitute equipment or service during reasonable periods of malfunction or non-use of this product while waiting for a replacement part or unit under this warranty. Some states do not allow exclusions of incidental or consequential damages so the above exclusions may not apply in all 9states. 9This 9warranty 9may 9give 9you 9specific 9legal 9rights 9your state.

HOW TO REACH US:

We're here to help Monday through Friday from 9AM to 7PM EST and Sunday 9AM to 4PM. You can reach us at 1-866-SNOWJOE (1-866-766-9563), online at snowjoe.com, via email at [e-mail] or tweet us @snowjoe.

EXPORTS:

Customers who have purchased Snow Joe ^8 + Sun Joe ^8