PS 1300B - Vacuum Cleaner Astora - Free user manual and instructions

USER MANUAL PS 1300B Astora

Two black studio lighting fixtures with red lighting elements, mounted on a stand against a plain background (no text or symbols visible)

SETTING UP 1

Mounting

Mount the light on a light stand

with the installed TVMP

there, the telephone offers two ways to mount the

light to a light stand.

Tilting

The tilt position of the light car

be adjusted by the high strength fill back away, which can be

expositioned by nulling and

turning it (ill & lock).

Powering

The light can be powered by:

2×NF F batteries / 1×V Mount battery / AC adapter through XLR 4 connector.

Power Switch	II	II	II	I
	2xN-H V-Mount		3-stud Mount	AC Adapter through XLR-7
WS 840D	●	14.8 V DC	14.4 V DC	12-24 V DC
WS 840B	●	14.8 V DC	14.4 V DC	12-24 V DC
PS 1300D	—	14.8 V DC	14.4 V DC	12-24 V DC
PS 1300B	—	14.8 V DC	14.4 V DC	12-24 V DC
SF 100	—	14.8 V DC	14.4 V DC	12-24 V DC
SF 120	—	14.8 V DC	14.4 V DC	12-24 V DC
SF 200	—	23.6 V DC	—	24-36 V DC

• Standard - Options - Not available

DMX (only models including DMX)

Connect a standard DMX console by the

XLR 3-pin connector.

Male Female

Pin 1: Ground Pin 2: Data 1 Pin 3: Data 1

FUNCTIONS2

Intensity | knab

Turn the knob to adjust intensity between 0 and 100%.

Color Temperature | knob

Turn the knob to adjust color temperature (only for B color models).

Presets | - <1\~4> % <1\~4>

Save: To save the current state of the light to a preact press and one of the Preact number buttons <1><2><3><4>

Recall: To recall a saved state press the Preset number button that you used to save the state.

Wireless Settings | + <3> % + <4>

Frequency: To set the Frequency for wireless control hold the but on and press the Frequency button <3> at the same time. With the Channel buttons <1, P=DOWN> you can adjust the frequency. To confirm press the button again

Password: To set the password for wireless control hold the button and press the Password button<4> at the same time. With the Channel buttons you can adjust the password. To confirm press the button again.

DMX | + <1>

I hold the button and press the DMX Mode button <1> at the same time to switch between 8 bit and 16 bit mode.

To set the DMX channel between 1 and 512 use the Channel and buttons.

Display View

To toggle between different display views you can press the button. You can toggle between below views:

Intensity / Color temperature

Frequency / Password

Power / Software Version / (Temperature) ^4 *Soft series only.

WHAT IS IN THE BOX3

MODEL	ASTORA WS 840D	ASTORA WS 840B	ASTORA PS 1300D	ASTORA PS 1300B	ASTORA SF 100	ASTORA SF 120	ASTORA SF 200
Light Body	●	●	●	●	●	●	●
Raincolors	●	●	●	●	●	●	●
Remote Controller	●	●	●	●	●	●	●
AC Acapter & Cable	○	○	●	●	●	●	●

• Standard ○ Optional = Not available
  Technical data and offerings are subject to change without notice.

Fan-Less, Silent Operation

Note: Fas Speed function is not selive with current models and reserved for future products with a built-in ban.

ASTORA

Copyright © VIBESTA All Rights Reserved

VIBESTA B.V. | Professor Rommolean 2, 5707 KS Holmond The Netherlands