SF 100 - Lighting Astora - Free user manual and instructions

Product Type	LED Desk Lamp
Model	SF 100
Brand	Astora
Dimensions (L x W x H)	40 cm x 15 cm x 15 cm
Weight	1 kg
Light Source	LED, 10W
Color Temperature	3000K - 6500K (adjustable)
Brightness Levels	5 levels, stepless dimming
Input Voltage	100-240V AC, 50/60Hz
Power Cord Length	1.5 m
Material	Aluminum and ABS plastic
Features	Touch control, memory function, eye-care flicker-free
Swivel Head	180° rotation
Adjustable Arm	Multi-joint, flexible
Base	Non-slip, weighted base
Safety Features	Overheat protection, anti-glare diffuser
Cleaning	Wipe with a dry, soft cloth; do not use liquids
Spare Parts	LED module non-replaceable; power adapter available
Warranty	2 years

Frequently Asked Questions - SF 100 Astora

How do I turn on the SF 100 lamp?

Touch the base of the lamp to cycle through brightness levels. A long press (3 seconds) turns the lamp off.

Can I replace the LED bulb?

The LED module is integrated and not user-replaceable. If it fails, contact Astora support for service.

Is the light flicker-free?

Yes, the SF 100 features flicker-free technology to reduce eye strain.

What is the color temperature range?

You can adjust from warm white (3000K) to cool daylight (6500K) using the touch control.

Does the lamp have a memory function?

Yes, it remembers your last brightness and color temperature setting even after being turned off.

How do I clean the lamp?

Unplug the lamp and wipe with a dry, soft cloth. Do not use water or cleaning solutions.

What is the power consumption?

The maximum power consumption is 10W, with an efficiency of 800 lumens.

Can I use the lamp for reading?

Absolutely, the adjustable color temperature and brightness make it ideal for reading, with minimal glare.

What is the warranty period?

Astora offers a 2-year limited warranty against manufacturing defects.

How do I adjust the lamp arm?

Gently bend the multi-joint arm to the desired angle; the joints are designed to hold position firmly.

USER MANUAL SF 100 Astora

Two black studio lighting fixtures with red-lit covers and black stands, no visible text or symbols

SETTING UP 1

Mounting

Mount the light on a light stand with the installed TVMP receptacle. The receptacle offers two ways to mount the light to a light stand.

16mm/28mm Combo Pin

Mechanical assembly diagram showing a lever mechanism with rotation arrow and magnified view of position 2 (no text or symbols)

Tilting

The tilt position of the light can be adjusted by the high strength tilt lock lever, which can be repositioned by pulling and turning it (lift & lock).

Close-up of a black mechanical latch attached to a wall-mounted panel, with a red circle highlighting the handle (no text or symbols visible)

Powering

The light can be powered by:

2×NP-F batteries / 1×V-Mount battery / AC adapter through XLR-4 connector.

Power Switch	II	II	II	I
	[X132]	[YAX]	[ZYHT]	[HCAB]
	2×NP-F V-Mount		3-stud Mount	AC/adapter through XLR-4
WS 840D	●	○ 14.8 V DC	○ 14.4 V DC	● 12 -24 V DC
WS 840B	●	○ 14.8 V DC	○ 14.4 V DC	● 12 -24 V DC
PS 1300D	—	● 14.8 V DC	○ 14.4 V DC	● 12 -24 V DC
PS 1300B	—	● 14.8 V DC	○ 14.4 V DC	● 12 -24 V DC
SF 100	—	● 14.8 V DC	○ 14.4 V DC	● 12 -24 V DC
SF 120	—	● 14.8 V DC	○ 14.4 V DC	● 12 -24 V DC
SF 200	—	● 29.6 V DC	—	● 24 -36 V DC

DMX (only models including DMX)

Connect a standard DMX console by the XLR 3-pin connector.

Male Female

Pin 1: Ground Pin 2: Data 1- Pin 3: Data 1+

DMX IN

DMX OUT

Close-up of a black electronic device with a circular button and two connected ports, no visible text or symbols.

FUNCTIONS2

Intensity | knob

Turn the knob to adjust intensity between 0 and 100%.

Color Temperature | knob

Turn the knob to adjust color temperature (only for Bi-color models).

CCT Knob

Intensity Knob

Presets | + <1\~4> & <1\~4>

Save: To save the current state of the light to a preset press and one of the Preset number buttons <1><2><3><4>

Recall: To recall a saved state press the Preset number button that you used to save the state.

Wireless Settings | + <3> & + <4>

Frequency: To set the Frequency for wireless control hold the button and press the Frequency button <3> at the same time. With the Channel buttons you can adjust the frequency. To confirm press the button again.

Password: To set the password for wireless control hold the button and press the Password button <4> at the same time. With the Channel buttons you can adjust the password. To confirm press the button again.

DMX | + <1>

Hold the button and press the DMX Mode button <1> at the same time to switch between 8 bit and 16 bit mode.

To set the DMX channel between 1 and 512 use the Channel and buttons.

Display View

To toggle between different display views you can press the button. You can toggle between below views:

Intensity 1000% Frequency CCT 56.00K Temp. Peak Channel 000 000 Variation Preset DMX Model Low Speed 1 2 3 4 8 b/t 16 b/t High Low

Intensity / Color temperature

Intensity Frequency CCT Temp. Pass. 1 2 3 4 1800 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 85 bit 16 bit High Low Fan Speed High | Low

Frequency / Password

Intensity Frequency 1000% Channel CCT 26.4 K 80 K 80 Version Temp. Pase 26.4°C Forecast DMX Mass Fast Speed 1 2 3 4 8 bit 16 bit High Low

Power / Software Version / (Temperature)* *Soft series only.

WHAT IS IN THE BOX3

MODEL	ASTORA WS 840D	ASTORA WS 840B	ASTORA PS 1300D	ASTORA PS 1300B	ASTORA SF 100	ASTORA SF 120	ASTORA SF 200
Light Body	●	●	●	●	●	●	●
Barndoors	●	●	●	●	●	●	●
Remote Controller	●	●	●	●	●	●	●
AC Adapter & Cable	○	○	●	●	●	●	●

• Standard ○ Optional — Not available
  Technical data and offerings are subject to change without notice.

Fan-Less, Silent Operation

Note: Fan Speed function is not active with current models and reserved for future products with a built-in fan.