ST-D700IR2812-W - Security Camera Security Tronix - Free user manual and instructions
Find the device manual for free ST-D700IR2812-W Security Tronix in PDF.
User questions about ST-D700IR2812-W Security Tronix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Security Camera in PDF format for free! Find your manual ST-D700IR2812-W - Security Tronix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ST-D700IR2812-W by Security Tronix.
USER MANUAL ST-D700IR2812-W Security Tronix
text_image
SECURITY TRONIXTHE IMAGE OF QUALITY
OPERATION MANUAL
ST-D700IR2812-B/W CMOS Indoor IR Dome Camera
PACKAGE CONTENTS
This package contains:
One (1) ST-D700IR2812-B/W 4.5" Indoor IR Dome Camera
One (1) Operation Manual
Note: The ST-D700IR2812-B/W requires a minimum 12VDC 550mA power supply such as the ST-PS12VDC1A or ST-PS12VDC2A.
PRODUCT DESCRIPTION
The ST-D700IR2812-B/W is an indoor dome infrared color camera designed around a 1/3^ Color CMOS imager with 700TVL of resolution and 21 infrared LEDs providing visibility up to 65 feet in total darkness. The camera's 2.8mm – 12mm manual zoom lens allows adjustment for an optimal field of view. The 3-axis bracket, size and packaging allow it to be easily and discretely installed. Its rich color, high definition, and stability make it attractive for CCTV security applications.
SPECIFICATIONS
ST-D7002812-B/W
Specifications (Typical)
| 1. Imager | 1/3" CMOS |
| 2. Pixels (HxV) | 756x504 |
| 3. Scanning System | NTSC |
| 4. Horizontal Resolution | 700TV Lines |
| 5. Synchronization | Internal, Negative Sync |
| 6. Minimum Illumination | 0.1Lux |
INSTALLATION AND OPERATION
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions.
This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electrical shock.
CAUTION: To reduce the risk of electrical shock do not remove the cover or back of this unit. No user serviceable parts are inside.
CAUTION: To prevent electric shocks and risk of fire hazards, do not use other than specified power source.
1. UNPACKING and HANDLING
Each unit is shipped assembled and factory tested.
Ensure that all accessories are removed from the container before discarding packing material
2. MECHANICAL INSPECTION
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is clean, and no connectors are broken, damaged, or loose. If equipment appears to be damaged or defective please contact your distributor or SecurityTronix at 1-800-688-9282 for assistance.
3. SPECIAL ATTENTION
a. The installer must comply with electrical safety standards. There must be sufficient
4. WIRING CONNECTIONS
a. Connect the power supply's plug to the camera's power outlet.
b. Connect the camera to the monitor with a 75Ω coaxial video cable.
c. Connect power supply's AC plug to a suitable AC power outlet.
d. Adjust the lens direction according to the required surveillance area and environment.
5. TROUBLESHOOTING
a. No picture after applying power - (i) check all plugs and cables are securely connected to the proper connectors; (ii) ensure your power supply is providing the