95-7362B - Kit voiture Metra - Free user manual and instructions

USER MANUAL 95-7362B Metra

Installation instructions for part 95-73628

Hyundai Elantra 2014-2016 95-7362B

KIT FEATURES

• ISO DDIN radio provision
- Painted black to match factory finish

KIT COMPONENTS

• A) Radio trim panel • B) Brackets

A

1

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7304 • HYBL-04

Antenna Adapter: • Not required

TOOLS REQUIRED

- Panel removal tool - Phillips screwdriver

Interior view of a car dashboard and infotainment system (no visible text or symbols)

Dash Disassembly

– Hyundai Elantra 2014-2016 ...... 2

Kit Assembly

- ISO DDIN radio provision .... 3

CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.

95-73628

Dash Disassembly

1. Remove trim panels from each side of center console. (Figure A)
2. Remove (4) Phillips screws from radio trim panel. Gently pry radio trim panel from dash. (Figure B)
3. Remove (4) Phillips screws securing radio chassis to sub dash. (Figure C)

Continue to kit assembly

Technical diagram of a car interior showing dashboard, steering wheel, and internal components (no text or labels)

(Figure A) (Figure B) (Figure C)

Technical line drawing of a car interior showing dashboard, steering wheel, and intake manifold (no text or labels)

Technical line drawing of a car dashboard with no visible text or symbols

95-73628

Kit Assembly

ISO DDIN radio provision

1. Attach the brackets to the radio with the screws included with radio. (Figure A)
2. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS.
3. Mount the assembly into the sub dash. (Figure B).
4. Reassemble the dash in the reverse order of disassembly using the 99-7362B trim panel instead of the factory panel. (Figure B)

Technical line drawing of an electronic device with mounting brackets and internal components (no text or symbols)

(Figure A)

Technical line drawing of a car interior showing dashboard, steering wheel, and gear shift (no text or labels)

(Figure B)

Installation instructions for part 95-73628

IMPORTANT

If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by parrolling in the most recognized and suggested

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

606-334-6782 for more information and take steps toward a better tomorrow.

Metra recommends MECP

certified technicians

Metra

Interior view of a car dashboard and air intake manifold (no visible text or symbols)

COMPONENTES DEL KIT

Technical diagram of a car interior showing dashboard, steering wheel, and internal components (no text or labels)

(Figura A) (Figura B) (Figura C)

Technical line drawing of a car interior showing dashboard, steering wheel, and intake manifold (no text or labels)

Technical line drawing of a car dashboard and steering wheel (no text or labels)

95-73628

Ensamble del kit

Technical line drawing of an electronic device housing with mounting brackets and internal components (no text or symbols)

(Figura A)

Interior view of a car dashboard and steering wheel (no text or symbols visible)

(Figura B)