99-7622HG - Kit voiture Metra - Free user manual and instructions

USER MANUAL 99-7622HG Metra

Interior view of a car dashboard with digital display and control knobs (no visible text or symbols)

Nissan Rogue 2014-2020, Nissan Rogue Sport 2017-Up

Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications

KIT FEATURES

• ISO DIN radio provision with pocket
- Painted high-gloss black metallic

KIT COMPONENTS

- A) Radio housing • B) Brackets • C) Pocket • D) #8 x 3/8" Phillips screws (4)

AB

Line drawing of a rectangular electronic component with mounting holes and a recessed panel (no text or symbols)

• 

Technical line drawing of two mechanical bracket components (no text or symbols)

[Non-Text]

Isometric line drawing of a rectangular electronic device with mounting holes (no text or symbols)

• 

TABLE OF CONTENTS

Dash Disassembly 2

Kit Assembly 3

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: 70-7552

Antenna Adapter: 40-NI12

TOOLS REQUIRED

- Panel removal tool • Phillips screwdriver

Attention! With the key out of the ignition, disconnect the negative battery terminal before installing this product. Ensure that all installation connections are secure before cycling the ignition to test this product.

DASH DISASSEMBLY

1. Unclip and remove the trim panel on the end of the passenger side of the dash. (Figure A)
2. Remove (1) Phillips screw securing the A/C vent then unclip and remove the vent. (Figure B)
3. Unclip and remove the trim panel above the glove box starting at the vent and working your way over to the radio. Note: There is a hook on the radio side of this panel so make sure you start from the vent on the passenger side. (Figure C)

Diagram of a car interior showing a door and seat, with an arrow indicating direction (no text or symbols)

(Figure A) (Figure D)

Diagram of a car's side panel with arrows indicating movement or force (no text or symbols)

(Figure B) (Figure E)

Diagram of a car interior showing a directional arrow and component layout (no text or symbols)

(Figure C) (Figure F)

1. Unclip and remove the A/C control. (Figure D)
2. Unclip and remove the trim panel to the left of the factory radio.

Note: On push to start models this panel will have the start button on it. (Figure E)

1. Remove (4) Phillips screws securing the factory radio then unclip and remove the radio. (Figure F)

Continue to Kit Assembly

Interior view of a car dashboard with air filters and steering wheel (no text or symbols visible)

Interior view of a car dashboard and infotainment system (no visible text or symbols)

Diagram of car interior showing dashboard, air vent, and seat with directional arrows indicating traffic or movement

KIT ASSEMBLY

1. Attach the pocket to the brackets with the provided (4) #8 x 3/8" Phillips screws. (Figure A)

2. Attach the aftermarket radio to the pocket/bracket assembly with the screws supplied with the radio. (Figure B)

3. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.

4. Mount the new radio/pocket assembly into the dash then snap the radio housing over the radio assembly.

5. Reassemble dash in reverse order of disassembly.

Technical line drawing of a mechanical bracket assembly (no text or symbols)

(Figure A) (Figure B)

Technical line drawing of a mechanical device with no visible text or symbols

Having difficulties? We're here to help.

our Tech Support line at:

386-257-1187

mail at:

[e-mail]

Tech Support Hours (Eastern Standard Time)

Monday - Friday: 9:00 AM - 7:00 PM

Saturday: 10:00 AM - 7:00 PM

Sunday: 10:00 AM - 4:00 PM

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills b enselling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.edu or call

368-672-5171 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians

Interior view of a car dashboard with digital display and control knobs (no visible text or symbols)

Nissan Rogue 2014-2020, Nissan Rogue Sport 2017 y mas

Technical line drawing of a rectangular frame with mounting holes and a central recessed opening (no text or symbols)

• 

Two mechanical bracket components with metal fittings, no text or symbols visible

• 

Isometric line drawing of a rectangular electronic enclosure or housing (no text or symbols)

• 

INDICE

Diagram of a car interior showing a door and seat, with an arrow indicating direction (no text or symbols)

(Figura A) (Figura D)

Diagram of a car's side panel with arrows indicating movement or force (no text or symbols)

(Figura B) (Figura E)

Diagram of a car interior showing a directional arrow and component layout (no text or symbols)

(Figura C) (Figura F)

Interior view of a car dashboard with steering wheel and air vent (no text or symbols visible)

Interior view of a car dashboard and infotainment system (no visible text or symbols)

Diagram of car interior showing dashboard, air conditioner unit, and control panel with directional arrows indicating navigation or movement.

ENSAMBLE DEL KIT

Technical line drawing of a mechanical assembly with no visible text or symbols

(Figura A) (Figura B)

Technical line drawing of a mechanical device with no visible text or symbols

Monday - Friday: 9:00 AM - 7:00 PM

Saturday: 10:00 AM - 7:00 PM

Sunday: 10:00 AM - 4:00 PM

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills to enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.edu or call 208,670-5771 (for more information and take place

toward a better tomorrow.