99-7619 - Kit voiture Metra - Free user manual and instructions

USER MANUAL 99-7619 Metra

INSTALLATION INSTRUCTIONS FOR PART 99-7619

APPLICATIONS

Nissan Frontier (all SL models and SV or SE models with Comfort and Convenience package)

Titan (excluding S models) Xterra 2013-up (excluding X models)

99-7619

Interior view of a car dashboard with air filters and control panels (no visible text or symbols)

KIT FEATURES

• ISO DIN radio provision with pocket
- Textured ABS

KIT COMPONENTS

• A) Trim Panel Brackets • B) Radio Trim Panel • C) Pocket • D) (4) #8 x 3/8" Phillips Screws

A

Two identical mechanical component diagrams with no visible text or symbols

BCD

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7552 2010-Up Nissan Harness

Antenna Adapter: • 40-NI12 2010-Up Nissan Antenna Adapter

Table of Contents

Dash Disassembly

• Nissan Titan 2013-up .... 2
• Nissan Frontier, Xterra 2013-up .... 2

Kit Assembly

- ISO DIN radio provision.... 3

TOOLS REQUIRED

• Panel removal tool
• Phillips screwdriver
• Socket Wrench

CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the aftermarket radio.

99-7619

Dash Disassembly

2013-Up Nissan Titan

1. Unclip the entire dash panel including the climate controls. Unplug and remove the panel. (Figure A)
2. Remove (4) Phillips screws securing the radio. Unplug and remove the chassis. (Figure B)

Front view of a car dashboard with digital displays and control knobs (no visible text or symbols)

(Figure A)

Technical line drawing of a car front panel with control buttons and wiring (no text or symbols)

(Figure B)

2013-Up Nissan Frontier, 2013-Up Nissan Xterra

1. Unclip and remove the trim panel above the radio and climate controls. (Figure A)
2. Remove the (1) Phillips screw under panel and the (2) Phillips screws securing the radio brackets to the sub dash. (Figure B)
3. Unclip and remove the entire panel including the climate controls and factory radio.
4. Remove (4) Torx screws securing the radio to the trim panel. (Figure C, D) Continue to kit assembly

Diagram of a car air vent with two upward arrows indicating airflow or movement (no text or symbols present)

(Figure A)

Technical line drawing of a mechanical housing or enclosure with internal compartments and mounting points (no text or symbols)

(Figure B)

Technical line drawing of a mechanical assembly with no visible text or symbols

(Figure C)

Technical line drawing of a mechanical assembly with no visible text or symbols

(Figure D)

99-7619

Kit Assembly

1. Cut and remove the shaded area of the brackets for the 2013-Up Frontier and Xterra. (Figure A)
2. Cut and remove the shaded area of the brackets for the 2013-up Titan. (Figure A)

ISO DIN radio provision

1. Clip the brackets into the radio trim panel. (Figure B)
2. Mount the pocket to the radio brackets with the (4) #8 x 3/8" Phillips screws supplied. (Figure C)
3. Slide the radio into radio brackets/pocket assembly and secure with screws supplied with the radio. (Figure D)

Technical illustration of two mechanical components labeled 'TitanFrontier, Xterra', showing cross-sectional views without any text or symbols on the components themselves.

(Figure A)

Frontier/Xterra bracket configuration shown

(Figure B)

1. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS.
2. For the Titan, mount the new radio assembly into the dash; for the Frontier and Xterra, mount the new radio assembly to the factory dash panel. Reassemble dash in reverse order of disassembly.

Technical line drawing of a mechanical assembly with no visible text or symbols

(Figure C)

Technical line drawing of a mechanical device with mounting brackets and internal components (no text or symbols)

(Figure D)

INSTALLATION INSTRUCTIONS FOR PART 99-7619

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and repurposed.

enrolling in the most recognized and resp. mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps toward a better tomorrow.

Metra recommends MECP

certified technicians

Interior view of a car dashboard with air filters and control panels (no visible text or symbols)

CARACTERÍSTICAS DEL KIT

Two technical line drawings of mechanical components or brackets, no text or symbols present

BCD

Top-down view of a car dashboard with air condition indicators and control panels (no text or symbols visible)

(Figura A)

Interior view of a car dashboard with control panel and buttons (no visible text or symbols)

(Figura B)

Nissan Frontier 2013 y mas Nissan Xterra 2013 y mas

Top-down view of a car air vent with two upward arrows indicating airflow direction (no text or symbols)

(Figura A)

Technical line drawing of a boat hull with multiple compartments and support structures (no text or labels)

(Figura B)

Technical line drawing of a mechanical assembly with no visible text or symbols

(Figura C)

Technical diagram of a mechanical assembly with mounting holes and housing (no text or labels)

(Figura D)

99-7619

Ensamble del kit

Technical line drawing of two mechanical components with no visible text or symbols

Technical illustration of two titanium front levers (Xterra) with mounting brackets and mounting holes, labeled as TitanFrontier (no text on components)

(Figura A)

Technical line drawing of a mechanical housing or frame assembly with directional arrows indicating motion (no text or symbols)

(Figura C)

Technical line drawing of a mechanical device with mounting brackets and internal components (no text or symbols)

(Figura D)