99-8243B - Kit voiture Metra - Free user manual and instructions

USER MANUAL 99-8243B Metra

INSTALLATION INSTRUCTIONS FOR PART 99-82438

APPLICATIONS

Toyota Prius V 2012-up 99-8243B

KIT FEATURES

• ISO DIN radio provision with pocket
- Painted matte black

Interior view of a car dashboard with air vent and control panel (no visible text or symbols)

KIT COMPONENTS

• A) Radio Housing Trim Panel • B) Brackets • C) Pocket • D) (4) #8 x 3/8" truss-head Phillips screws

Technical line drawings of mechanical components including a housing, clamping mechanism, and screw base (no text or symbols)

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-1761 harness or TYTO-02 Premium Sound Interface

Antenna Adapter: • 40-LX11

TOOLS REQUIRED

- Panel removal tool - Phillips screwdriver - Socket Wrench

Table of Contents

Dash Disassembly

— Toyota Prius V 2012-up .... 2

Kit Assembly

- ISO DIN radio provision with pocket.... 3

CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the aftermarket radio.

99-8243B

Dash Disassembly

1. Unsnap and remove the shifter trim panel. (Figure A)
2. Open the glove box then unsnap and remove the box and door as one unit. (Figure B)

Line drawing of a car dashboard and steering wheel (no text or symbols)

(Figure A)

1. Unsnap the vents from above the factory radio. (Figure C)
2. Remove four 10mm bolts to remove the factory radio. (Figure D)

Continue to kit assembly

Diagram of a car interior showing airflow or traffic flow direction (no text or symbols)

(Figure B)

Line drawing of a car dashboard with air vent and control panel (no text or symbols)

(Figure C)

Technical line drawing of a vehicle dashboard with no visible text or symbols

(Figure D)

99-8243B

Kit Assembly

ISO DIN radio provision

1. Mount the pocket to the radio brackets with the (4) #8 x 3/8" Phillips screws supplied. (Figure A)
2. Slide the radio into radio brackets and secure with screws supplied with the radio. (Figure B)
3. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS.
4. Mount the new radio assembly into the dash.
5. Snap the radio trim panel over the new radio and reassemble dash in reverse order of disassembly. (It is best to connect the factory vent assembly to the radio housing trim panel prior to installation.)

Technical line drawing of a mechanical housing assembly with mounting brackets and mounting holes (no text or symbols)

(Figure A) (Figure B)

Technical line drawing of a device housing with mounting brackets and screw fasteners (no text or symbols)

INSTALLATION INSTRUCTIONS FOR PART 99-82438

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and repurposed.

enrolling in the most recognized and resp. mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps toward a better tomorrow.

Metra recommends MECP

certified technicians

Interior view of a car dashboard with air filters and control panel (no visible text or symbols)

COMPONENTES DEL KIT

Line drawing of a car dashboard and steering wheel (no text or symbols)

(Figura A)

Diagram of a car interior showing airflow or traffic flow direction (no text or symbols)

(Figura B)

Line drawing of a car dashboard with air vent and control panel (no text or symbols)

(Figura C)

Technical line drawing of a vehicle dashboard with no visible text or symbols

(Figura D)

Ensamble del kit

Technical line drawing of a mechanical housing assembly with mounting brackets and mounting holes (no text or symbols)

(Figura A) (Figura B)

Technical line drawing of a mechanical device with mounting brackets and internal components (no text or symbols)