CB-DP1H11-S1 - Accessoires et périphériques informatiques Siig - Free user manual and instructions
Find the device manual for free CB-DP1H11-S1 Siig in PDF.
User questions about CB-DP1H11-S1 Siig
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Accessoires et périphériques informatiques in PDF format for free! Find your manual CB-DP1H11-S1 - Siig and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CB-DP1H11-S1 by Siig.
USER MANUAL CB-DP1H11-S1 Siig
natural_image
Simple circular icon with a horizontal line inside, no text or symbols present.User Reference Guide
Compact and easy to bring on the road
04-0988A
Thanks for purchasing SIIG product. Please read this manual carefully prior to use.
If you require more information about our products, please visit www.siig.com.
For technical support, please go to www.siig.com/support.
Product Layout
text_image
DVI HDMI VGA Mini DisplayPortPackage Contents
- Mini DisplayPort 1.2 to HDMI / DVI / VGA Conversion Adapter
- User Reference Guide
Specifications
- Input: Mini DisplayPort 1.2 (Dual-mode)/ Thunderbolt Port Male
• Output: HDMI Female / DVI Female / VGA Female - Max resolution:
- HDMI: 4K x 2K (w / audio)
- DVI & VGA: 1920 x 1080 @ 60HZ (w/o audio)
- Power: Supplied by Mini DisplayPort (No external power required)
- Connector type of Mini DisplayPort: Golden-plated
Start using
- Connections
Mini DisplayPort: Connect to the Mini DisplayPort of the competer HDMI / DVI / VGA Port: Choose one port to connect with your monitor / HDTV / Projecter by individual monitor cable (not included)
- Notes
- The adapter does not support more than one output simultaneously.
- The adapter supports converting signal from Mini DisplayPort to HDMI /DVI / VGA only. It's not a bi-directional adapter.
- There's no audio output from DVI and VGA.
-
Macs manufactured before 2010 do not support audio output over Mini DisplayPort.
-
To achieve Mini DisplayPort 1.2 performance, please make sure that the connected input source is also Mini DisplayPort 1.2 supported.
FAQ & Solutions
If I would like to switch to another output of the adapter, how should I do?
- Unplug the connected monitor cable from the adapter, then plug another monitor cable into the output port you are going to use.
If the adapter isn't working properly:
- Check all connections of the adapter and monitor cable are firm.
- Unplug the connected monitor cable from the adapter and plug again.
- If above doesn't work, unplug the adapter from the Mini DisplayPort of the computer and plug again.
If the max. resolution of HDMI output couldn't reach 4K x 2K:
- Check that whether the connected monitor is 4K x 2K supported.
Warranty & Contact Info
3 years warranty limited
Mon-Fri 8:00\~17:00
(510) 657-8688
www.siig.com