GC-B247SEDC - Fridge LG - Free user manual and instructions

USER MANUAL GC-B247SEDC LG

Read this owner's manual thoroughly before operating the appliance and keep it handy for reference at all times.

EN ENGLISH RU PYCCKИЙ UZ O'ZBEKCHA

TABLE OF CONTENTS

This manual may contain images or content different from the model you purchased.

This manual is subject to revision by the manufacturer.

SAFETY INSTRUCTIONS ....3

IMPORTANT SAFETY INSTRUCTIONS ....3

INSTALLATION....10

Compartments....10

Dimensions and Clearances....11

Ambient Temperature....11

Removing the Door....12

Refitting the Door....12

Adjusting the Height of the Door 13

Connecting the Appliance ....14

Moving the Appliance....14

OPERATION 15

Parts and Functions....15

Notes for Operation....19

Using Control Panel 21

Icemaker (*) 23

Door in Door (*)....25

Fresh Vegetable Drawer(*)....26

InstaView Function (*) 26

Other Functions....26

SMART FUNCTIONS....27

Using LG SmartThinQ Application 27

Using Smart Diagnosis™ 29

MAINTENANCE....30

Notes for Cleaning 30

Cleaning the Condenser Cover....30

Cleaning the Door Basket 31

Cleaning the Shelf....31

Cleaning the Vegetable Drawer 31

TROUBLESHOOTING....33

SAFETY INSTRUCTIONS

EN

The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance.

The guidelines are separated into 'WARNING' and 'CAUTION' as described below.

This symbol is displayed to indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.

WARNING

This indicates that the failure to follow the instructions can cause serious injury or death.

CAUTION

This indicates that the failure to follow the instructions can cause the minor injury or damage to the product.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following:

Children in the Household

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• If the appliance is equipped with a lock (some models only), keep the key out of reach of children.

Installation

• This appliance should only be transported by two or more people holding the appliance securely.
• Ensure that the socket outlet is properly grounded, and that the earth pin on the power cord is not damaged or removed from the power plug. For more details on grounding, inquire at an LG Electronics customer information centre.
• This appliance is equipped with a power cord having an equipment-grounding conductor and a grounding power plug. The power plug must be plugged into an appropriate socket outlet that is installed and grounded in accordance with all local codes and ordinances.
• If the power cord is damaged or the hole of the socket outlet is loose, do not use the power cord and contact an authorized service centre.

• Do not plug the appliance into a multi socket adapter which does not have a power cable (mounted).

• Do not modify or extend the power cable.

• The appliance should be connected to a dedicated power line which is separately fused.
• Do not use a multi socket outlet which is not properly grounded (portable). In case of using a properly-grounded multi socket outlet (portable), use the multi socket outlet with the current capacity of the power code rating or higher and use the multi socket outlet only for the appliance.

• Install the appliance in a place where is easy to unplug the power plug of the appliance.

- Be careful not to point the power plug up or let the appliance lean against the power plug.

• Install the appliance on a firm and level floor.
- Do not install the appliance in a damp and dusty place. Do not install or store the appliance in any outdoor area, or any area that is subject to weathering conditions such as direct sunlight, wind, rain, or temperatures below freezing.

- Do not place the appliance in direct sunlight or expose it to the heat from heating appliances such as stoves or heaters.

- Be careful not to expose the rear of the appliance when installing.

EN

• Be careful not to let the appliance door fall during assembly or disassembly.
• Be careful not to pinch, crush, or damage the power cable during assembly or disassembly of the appliance door.
• Do not connect a plug adapter or other accessories to the power plug.

Operation

• Do not use the appliance for any purpose (storage of medical or experimental materials or shipping) other than any domestic household food storage use.
• Unplug the power plug during a severe thunderstorm or lightening or when not in use for a long period of time.
• Do not bend the power cable excessively or place a heavy object on it.
• Do not touch the power plug or the appliance controls with wet hands.
• Do not bend the power cable excessively or place a heavy object on it.
• If water penetrates electrical parts of the appliance, disconnect power plug and contact an LG Electronics customer information centre.
• Do not place hands or metallic objects inside the area emitting the cold air, cover or heat releasing grille on the back.
• Do not apply excessive force or impact to the back cover of the appliance.
• Do not put animals, such as pets into the appliance.
• Be careful of nearby children when you open or close the appliance door. The door may bump the child and cause injury.
• Avoid the danger of children getting trapped inside the appliance. A child trapped inside the appliance can cause suffocation.
• Do not place heavy or fragile objects, containers filled with liquid, combustible substances, flammable objects (such candles, lamps, etc.), or heating devices (such as stoves, heaters, etc.) on the appliance.

EN

- If there is a gas leakage (isobutane, propane, natural gas, etc.), do not touch the appliance or power plug and ventilate the area immediately. This appliance uses a refrigerant gas (isobutane,R600a). Although it uses a small amount of the gas, it is still combustible gas. Gas leakage during appliance transport, installation or operation can cause fire, explosion or injury if sparks are caused.

- Do not use or store flammable or combustible substances (ether, benzene, alcohol, chemical, LPG, combustible spray, insecticide, air freshener, cosmetics, etc.) near the appliance.

- Immediately unplug the power plug and contact an LG Electronics customer information centre if you detect a strange sound, odour, or smoke coming from the appliance.

- Fill with potable water only into icemaker or dispenser water tank.

- Do not damage the refrigerant circuit.

- Do not place any electronic appliance (such as heater and mobile phone) inside the appliance.

Maintenance

- Disconnect the power cord before cleaning the appliance or replacing the inside lamp (where fitted).

- Securely plug the power plug in the socket outlet after completely removing any moisture and dust.

- Never unplug the appliance by pulling on the power cable. Always grip the power plug firmly and pull straight out from the socket outlet.

- Do not spray water or inflammable substances (toothpaste, alcohol, thinner, benzene, flammable liquid, abrasive, etc.) over the interior or exterior of the appliance to clean it.

- Do not clean the appliance with brushes, cloths or sponges with rough surfaces or which are made of metallic material.

- Only qualified service personnel from LG Electronics service centre should disassemble, repair, or modify the appliance. Contact an LG Electronics customer information centre if you move and install the appliance in a different location.

EN

• Do not use a hair drier to dry the inside of the appliance or place a candle inside to remove the odours.
• Do not use mechanical devices or other means to accelerate the defrosting process.
• Connect the water supply line (for plumbed models only) to a potable water source only. Otherwise, impurities in the water may cause illness.

Disposal

- When discarding the appliance, remove the door gasket while leaving the shelves and baskets in place and keep children away from the appliance.

- Dispose of all packaging materials (such as plastic bags and styrofoam) away from children. The packaging materials can cause suffocation.

Technical Safety

- Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

- Do not use electrical appliances inside the refrigerator.

- The refrigerant and insulation blowing gas used in the appliance require special disposal procedures. Consult with service agent or a similarly qualified person before disposing of them.

- Refrigerant leaking out of the pipes could ignite or cause an explosion.

- The amount of refrigerant in your particular appliance is shown on the identification plate inside the appliance.

- Never start up an appliance showing any signs of damage. If in doubt, consult your dealer.

- This appliance is intended to be used in household and similar applications only. It should not be used for commercial, or catering purposes, or in any mobile application such as a caravan or boat.

- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

Risk of Fire and Flammable Materials

This symbol alerts you to flammable materials that can ignite and cause a fire if you do not take care.

- This appliance contains a small amount of isobutane refrigerant (R600a), but it is also combustible. When transporting and installing the appliance, care should be taken to ensure that no parts of the refrigerating circuit are damaged.

- If a leak is detected, avoid any naked flames or potential sources of ignition and air the room in which the appliance is standing for several minutes. In order to avoid the creation of a flammable gas air mixture if a leak in the refrigerating circuit occurs, the size of the room in which the appliance is used should correspond to the amount of refrigerant used. The room must be 1 ~m^2 in size for every 8 g of R600a refrigerant inside the appliance.

- When positioning the appliance, ensure the supply cord is not trapped or damaged.

- Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.

CAUTION

To reduce the risk of minor injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following:

Installation

- Do not tilt the appliance to pull or push it when transporting.

- Make sure not to get a body part such as a hand or foot stuck while moving the appliance.

Operation

- Do not touch frozen food or the metal parts in the freezer compartment with wet or damp hands. It may cause frostbite.

EN

• Do not place glass containers, bottles or cans (especially those containing carbonated drinks) in the freezer compartment, shelves or ice bin that will be exposed to temperatures below freezing.
• The tempered glass on the front side of the appliance door or the shelves can be damaged by an impact. If it is broken, do not touch it with hands.
• Do not place heavy objects on top of the door in door.

- Do not use the door in door as a chopping board and ensure it is not scratched by a sharp tool, as this may cause appliance damage.

- Do not hang from the appliance door, storage room, shelf or fridge door in door or climb up into it.

- Do not store an excessive amount of water bottles or containers for side dishes on the door baskets.

• Prevent animals from nibbling on the power cable or water hose.
• Do not open or close the appliance door with excessive force.

- If the hinge of the appliance door is damaged or operates improperly, stop using the appliance and contact an authorized service centre.

• Do not clean glass shelves or covers with warm water when they are cold.
• Never eat frozen foods immediately after they have been taken out in the freezer compartment.
• Make sure not to get a hand or foot stuck upon opening or closing the appliance door or door in door.
• Do not open the door of the appliance with the door in door open, or do not open the door in door while the door of the appliance is open. The door in door may be struck by the edge of the appliance and damaged.

Maintenance

• Do not insert the shelves upside down. The shelves may fall.
  • To remove frost from the appliance, contact an LG Electronics customer information centre.

INSTALLATION

EN

Compartments

Line drawing of a double door refrigerator with front panel and side door (no text or symbols)

Line drawing of a double door with front panel and side door, no text or symbols present

Line drawing of a rectangular container with multiple circular indentations inside (no text or symbols)

Line drawing of a rectangular ice cream mold with multiple cavities and a base (no text or symbols)

Line drawing of a mechanical wrench (no text or symbols)

Movable Egg Box (*) Ice Tray (*) Spanner

Owner's Manual

- The appearance or components of the appliance may differ from model to model.

EN

Dimensions and Clearances

Too small of a distance from adjacent items may result in the degradation of freezing capability and increased electricity costs. Allow over 50 mm of clearance from each adjacent wall when installing the appliance.

A B C D E F G

- Size
A 912 mm
B 1790 mm
C 738 mm
D 10 mm
E 728 mm
F 1180 mm
G 1750 mm

Ambient Temperature

- The appliance is designed to operate within a limited range of ambient temperatures, depending on the climate zone.

- The internal temperature could be affected by the location of the appliance, the ambient temperature, the frequency of door opening and so on.

- The climate class can be found on the rating label.

Climate Class	Ambient Temperature Range °C
SN (Extended Temperate)	+10 - +32
N (Temperate) +16 - +32
ST (Subtropical) +16 - +38
T (Tropical) +16 - +43 / +10 - +43*

*Australia, India, Kenya

NOTE

- The appliances rated from SN to T are intended to be used at an ambient temperature between 10 °C and 43 °C.

Removing the Door

When it is necessary to move the appliance through a narrow opening, removing the doors is the recommended procedure.

WARNING

- Disconnect the power cord, house fuse or circuit breaker before installing or servicing the appliance. Failure to follow these instructions may result in death, fire or electric shock.

If your entrance door is too narrow for the appliance to pass through, remove the appliance doors and pass the appliance laterally.

[For both freezer and fridge]

1 Remove the screw of the hinge cover on top of the appliance by rotating it counterclockwise.

Pure mechanical diagram showing a tool pressing a component on a workbench (no text or symbols)

2 While pressing (1) hook of the link of the electrical connectors, remove the link by pulling it in both directions.

Technical diagram showing a hand operating a tool with an inset close-up highlighting a mechanical component or assembly.

3 Remove the hinge lever by tapping the end of it toward the outside edge of the cabinet.

Technical line drawing of a mechanical component or tool (no text or symbols visible)

CAUTION

- When removing the upper hinge, be sure to support the door as it will fall forwards. It is recommended that two or more people carry out the door removal and refitting.

4 Lift the upper hinge fixed between the appliance and the appliance door and then remove it.

Upper hinge Door

5 Remove the freezer and fridge compartment door by lifting it upward. At this time, the door should be lifted enough for the steel pipe to be completely pulled out.

Pure technical diagram showing a mechanical assembly with an arrow indicating direction (no text or symbols)

Refitting the Door

Mount the doors in the reverse sequence of their removal once the appliance has been passed through all access doors.

EN

Adjusting the Height of the Door

If the door of the appliance is not level, adjust the difference in the height of appliance door using the following method.

NOTE

- Because the hinge pin may fall out, do not adjust the height of the appliance door more than 5 mm.

[Method1]

*Reference

Keeper nut Adjustment hinge pin

1 Turn the keeper nut clockwise using the spanner.

To loosen the nut

2 Adjust the difference in the height of the appliance door by rotating the adjustment hinge pin clockwise or counterclockwise with an 8 mm spanner.

Up

3 Fasten the keeper nut by turning it counterclockwise.

To tighten the nut

If it is impossible to adjust the height of the appliance door through the above method, level the door according to the following guide.

[Method2]

If the freezer compartment door is lower than the fridge compartment door

Level the door by inserting flat(-type) driver into groove of the left height adjusting screw and rotate it clockwise.

Diagram illustrating a mechanical or electrical setup with labeled components and directional arrows indicating motion or force.

If the freezer compartment door is higher than the fridge compartment door

Level the door by inserting flat(-type) driver into groove of the right height adjusting screw and rotate it clockwise.

Diagram illustrating a physics experiment with pulley system and rotating arm, including magnified view of motion direction

Connecting the Appliance

After installing the appliance, connect the power plug into a socket outlet.

NOTE

- After connecting the power supply cord (or plug) to the outlet, wait 2 or 3 hours before you put food into the appliance. If you add food before the appliance has cooled completely, your food may spoil.

Moving the Appliance

1 Remove all food from inside the appliance.
2 Pull the power plug out, insert and fix it into the power plug hook at the rear or on top of the appliance.
3 Tape parts such as shelves and the door handle to prevent from falling off while moving the appliance.
4 Move the appliance with more than two people carefully. When transporting the appliance over a long distance, keep the appliance upright.
5 After installing the appliance, connect the power plug into a socket out to switch on the appliance.

OPERATION

EN

Parts and Functions

Exterior

1 2 3

1 4 3

1 Control Panel

To set the freezer and fridge temperatures.

② Door-in-Door (*)

The Door in Door is a double layered door system. It can be opened individually or together with the main door. You can conveniently locate and access your favourite snacks or food items.

③ Door-in-Door Lever (*)

This lever opens Door in Door.

4 InstaView Door in Door (*)

The InstaView Door in Door compartment allows for easy access to commonly used food items.

NOTE

• (*) means that this feature varies depending on the model purchased.
- The appearance or components of the appliance may differ from model to model.

EN

Interior

(1) 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5

(1) 6 7 8 9 10 11 12 13 14 15 4 3 2 1

EN

1 LED Lamp

The LED lamps inside the appliance light up when you open the door.

② Freezer Shelf (\*)

This is where frozen foods such as meat, fish, and ice cream can be stored.

③ Icemaker (\*)

This is where ice is manually produced and stored.

4 Freezer Drawer ( \* )

This is for long-term storage of frozen items.

5 Freezer Door Basket

This is where small packages of frozen food can be stored.

- Do not store ice cream or food which will be stored for a long period of time within these baskets.

6 Smart Diagnosis Unit

Use this function when contacting LG Electronics customer information centre to help make an accurate diagnosis when the appliance operates abnormally or a failure occurs.

7 Door in Door (\*)

This is where foods which are taken out frequently such as beverages and snacks are stored.

8 Bottle Rack (\*)

This is where drinks tall bottles or containers are stored.

CAUTION

- Do not store short bottles or containers. The items may fall and cause an injury or appliance damage.

9 Fridge Shelf

This is where refrigerated foods and other items are stored.

• The shelf height can be adjusted by inserting the shelf in another groove of different height.
• Store the foods with higher moisture content at the front of the shelf.
• The actual number of shelves will differ from model to model.

10 Hygiene Fresh (\*)

- This function reduces and removes odors inside the fridge compartment.

EN

11 Snack Drawer (\*)

This is where small packages of refrigerated foods are stored.

12 Temperature Sensor

This sensor senses the temperature of the fridge compartment.

- Maintain the distance between the sensor and food to accurately sense the temperature.

13 Fresh Vegetable Drawer (\*)

This is where fruits and vegetables are stored to help maintain freshness by adjusting the humidity controller.

14 Fridge Door Basket

This is where small packages of refrigerated foods, drinks and sauce containers are stored.

15 Vegetable Drawer

This is where fruits and vegetables are stored to remain fresh for as long as possible.

- The actual number of drawers will differ from model to model.

NOTE

• (*) means that this feature varies depending on the model purchased.
- The 2-star section ( ^** ) basket or drawer can be used to store ice and food from -12 °C to -18 °C for short periods.
- The top shelf of the freezer(1) will reach the set temperature the most quickly.

Notes for Operation

• Users should keep in mind that frost can form. If the door is not closed completely, if the humidity is high during the summer, or if the freezer door is opened frequently.
• Ensure there is sufficient space between food stored on the shelf or door basket to allow the door to close completely.
• Opening the door lets warm air enter the appliance, and may cause the internal temperature to rise.
• If you are leaving the appliance turned off for an extended period of time, remove all food and unplug the power cord. Clean the interior, and leave the doors slightly ajar to prevent mold from growing in the appliance.

Suggestion for Energy Saving

• Ensure there is sufficient space between stored foods. This allows cold air to be circulated evenly and lowers electricity bills.
• Store hot food only after it has cooled in order to prevent dew or frost.
• When storing food in the freezer compartment, set the freezer temperature lower than the temperature indicated on the food.
• Do not put food near the temperature sensor of the fridge compartment. Keep a distance of at least 3 cm from the sensor.
• Note that a temperature rise after defrosting has a permissible range in the appliance specifications. If you wish to minimise the impact this may have on the food storage due to a temperature rise, seal or wrap the stored food in several layers.
• The automatic defrosting system in the appliance ensures that the compartment remains free of ice buildup under normal operating conditions.

EN

Storing Foods Effectively

- Store frozen food or refrigerated food inside sealed containers.

- Check the expiration date and label (storage instructions) before storing food in the appliance.

- Do not store food for a long period of time (more than four weeks) if it spoils easily at a low temperature.

- Place the refrigerated food or frozen food in each fridge or freezer compartment immediately after purchasing.

- Avoid refreezing any food which has been completely thawed. Freezing any food which has been completely thawed again will lower its taste and nutrition.

- Do not wrap and store vegetables with newspaper. Printing material of newspaper or other foreign substances may smear and contaminate food.

- Do not overfill the appliance. Cold air can not circulate properly if the appliance is overfilled.

- If you set an excessively low temperature for food, it may become frozen. Do not set a temperature lower than the required temperature for the food to be stored correctly.

- If there are chill compartments in the appliance, do not store vegetables and fruits with higher moisture content in the chill compartments as they may freeze due to the lower temperature.

Max Freezing Capacity

- The Express Freeze function will set the freezer to its maximum freezing capacity.

• This generally takes up to 24 hours and automatically switches off.

- If the maximum freezing capacity is to be used, Express Freeze must be switched on for seven hours before fresh produce is placed in the freezer compartment.

Maximum Storage

• To get better air circulation, insert all drawers.

- If large quantities of food are to be stored, all the freezer drawers shall be taken out of the appliance except the bottom one and the food shall be stacked directly on the freezer shelves in the freezer compartment.

NOTE

- To remove the drawers, first pick the food out of drawers. Then use the handle of drawers, pull out the drawers carefully. It may cause injury.

- The shape of each drawer may be different, insert in the right position.

Using Control Panel

Units and Functions

-88°C Fridge _ - Freezer _ - Hygiene Fresh _ Express Freeze * Wi-Fi _ * Lock 6 Power * Extra Function : Hold 3sec.

-88°C -88°C Fridge 1 - Freezer * Wi-Fi 2 - Express Freeze 5 - Lock 4 * Lock 6 *Extra Function : Hold 3sec.

1 Fridge Temperature

• This sets the fridge target temperature.

2 Freezer Temperature

• This sets the freezer target temperature.

3 Hygiene Fresh (\*)

• This sets the Hygiene Fresh function.

4 Express Freeze

• This sets Express Freeze functions.

5 \* Wi-Fi

- This sets the appliance to connect to your home's Wi-Fi network.

6 \*Lock

- This locks the buttons on the control panel.

NOTE

• (*) means that this feature varies depending on the model purchased.
• The actual control panel may differ from model to model.
- The control panel will turn off automatically for energy saving.
- If there is any finger or skin contacts to the control panel while cleaning it, the button function may operate.

Setting the Temperature

This sets the fridge temperature or freezer temperature.

- Press the Fridge button or Freezer button to adjust the temperature.

• The temperature can be adjusted.

- Fridge: from 1 °C to 7 °C

- Freezer : from -14 °C to -24 °C

- The actual inner temperature varies depending on the food status, as the indicated setting temperature is a target temperature, not actual temperature within the appliance.

NOTE

- The default temperature setting may vary depending on the appliance.

- Wait until two or three hours have passed after connecting the appliance to the outlet before storing food in the appliance.

- For ice making in normal climates, the freezer temperature should be set to -19 °C or colder.

Setting Hygiene Fresh

Bacteria and odor inside the appliance can be minimized with the Hygiene Fresh function. However, the function is only effective for bacteria floating in the appliance, not bacteria adsorbed onto food.

- Each time you press the Hygiene Fresh button, the Hygiene Fresh function mode will change to Auto → Power → Off → Auto alternatively.

Setting Express Freeze

The function can quickly freeze a large amount of ice or frozen foods.

- When you press the Express Freeze button, the Express Freeze icon lights on the control panel.

- The function is enabled and disabled in turn each time you press the button.

- The Express Freeze function automatically terminates after a specific period has passed.

Setting and Resetting Lock

This locks the buttons on the control panel.

- Press and hold the Lock button for 3 seconds. When the Lock function is set, all buttons are locked.

- When you press the Lock button for 3 seconds, the Lock/Unlock icon on the control panel lights. The function is enabled and disabled in turn each time you press the button.

- If you press a button other than lock when the lock is set, the button will not function.

- When you press a button other than lock when the lock is set, the Lock/Unlock icon on the control panel will flash 3 times.

- To change a setting, first press the Lock button for three seconds to disable the function.

Icemaker (\*)

This is where ice is manually produced and stored.

Making Ice

1 Hold the handle of ice tray and pull it out.

Illustration of a hand inserting a card into a device (no text or symbols visible)

2 Fill the ice tray with water so that all the cubes are equally full.

Line drawing of a laboratory apparatus with a funnel and container (no text or symbols)

3 Place the ice tray back to its position carefully not to spill water on the floor.

CAUTION

- Be careful not to spill water when inserting the ice tray after filling with water.

Fill the icetray with water so that all the cubes are equally full. And place it in the freezer compartment.

Hand using a tool to cut a grid on a tray (no text or symbols visible)

Taking Out Ice

1 Rotate the ice separation handle on the icemaker clockwise.

2 Lift the ice storage bin slightly and remove.

Line drawing of a hand inserting a device into a machine (no text or symbols)

Hold the icetray at its ends and twist gently.

Illustration of hands holding a computer with a scroll wheel and directional arrow (no text or symbols)

CAUTION

• If you open and close the freezer door frequently, it may take longer for water to be frozen.
• The time for water to be frozen may vary according to the season. Until 24 hours after initial installation, the temperature inside the appliance may not be stabilized so that it may take longer for water to be frozen.
  • Make sure to be careful as the edges of the ejected ice may be sharp.

NOTE

• (*) means that this feature varies depending on the model purchased.

- If ice cannot be detached easily, rotate the ice separation handle of the icemaker once again.

- Please note that ice may stick together if you rotate the ice separation handle of the icemaker before the water has completely frozen.

- It takes approximately three hours for water at the temperature of -20 °C to be frozen completely.

- When placing the ice storage bin back to its original position after using, make sure to check if it is inserted all the way in.

- The proper storage amount of the ice storage bin is the amount of ice made three times. If more than the amount of ice made for three times is stored, the ice storage bin may not come out and will become stuck. Do not store more than three ejected ice trays of ice in the ice storage bin.

Removing the Icemaker (\*)

1 Hold both edges of the freezer door basket on top of the icemaker and remove it by pulling it up.

Illustration of hands operating a mechanical device with upward arrows indicating motion (no text or symbols)

2 Hold both edges of ice tray compartment and remove it by pulling it up.

Illustration of hands holding a rectangular object with arrows indicating direction (no text or symbols)

CAUTION

- Remove in this order. Removing the ice tray first may cause damage.

- When separating the icemaker, hold and remove it properly to prevent the ice tray from falling off.

NOTE

• (*) means that this feature varies depending on the model purchased.

Cleaning the Ice Tray

1 Hold the handle of ice tray and pull it out to remove.

Hand inserting a component into a device (no text or symbols visible)

2 After cleaning, remove it back to its original position.

CAUTION

- When cleaning, wipe all components with a wet towel except for the ice tray and dry them off completely before using. Failure to do so may cause malfunctions.

EN

Door in Door ( \* )

Pull the lever at the bottom of the door upwards until the door in door opens.

There is plenty of storage space inside the door in door and its surrounding baskets, allowing you to store food in an organized manner.

Diagram illustrating a hand holding a tool with an arrow indicating upward motion, accompanied by a magnified view of the tool's movement.

Removing the Case from the Door in Door

Hold the case from inside the door in door with both hands and remove it by lifting it upward.

Refitting the Door in Door Case

Mount them in the reverse order of the removal process.

Removing the Baskets from the Door in Door

1 Hold both edges of the basket and remove it by lifting it upward.

Illustration of a refrigerator with an open door and a magnified inset showing hand positioning (no text or symbols)

2 Lift the fixed basket up as shown in (1) and remove it by pulling it out as shown in (2).

(1) (2)

Refitting the Baskets to the Door in Door

Mount them in the reverse order of the removal process.

NOTE

- (*) means that this feature varies depending on the model purchased.

Fresh Vegetable Drawer( \* )

The Humidity in the vegetable crisper drawer can be controlled by sliding the lever in either direction.

If moved to the left side, the air guide will be open and allow air to circulate through the drawer for reduced humidity. And if moved to the right side, the air guide will be closed and will maintain any humidity that is currently in the crisper drawer.

The closed state is recommended for storing vegetables, and open state is recommended for storing fruit.

Type 1 Type 2

NOTE

- (*) means that this feature varies depending on the model purchased.

InstaView Function (\*)

The InstaView function on the Door-in-Door lets you see if you're running low on frequently used items like beverages and snacks, without opening the refrigerator door.

Isometric line drawing of a rectangular frame with a hand holding a small object inside (no text or symbols)

1 Knock twice on the glass to turn the LED light inside the Door-in-Door on or off.
2 The LED light turns off automatically after ten seconds.
1 Knock twice on the glass to turn the LED light inside the Door-in-Door on or off.
2 The LED light turns off automatically after ten seconds.

• The InstaView Door-in-Door function is disabled when the right refrigerator door and the left freezer door are open, for two seconds after closing the door, and when the ice dispenser is in use.
• Knock near the centre of the glass. Knocking near the edges of the glass may not activate the InstaView Door-in-Door function properly.
• Knock hard enough that the knocking sound is audible.
• The InstaView Door-in-Door function may activate if a loud noise occurs near the refrigerator.

NOTE

• (*) means that this feature varies depending on the model purchased.

Other Functions

Door Open Alarm

The alarm sounds 3 times in 30 second intervals if the door (fridge compartment, freezer compartment, door in door) is left open or not completely closed for one minute.

- Contact the LG Electronics customer information centre if the alarm sound continues even after closing the door.

Failure Detection

The appliance can automatically detect problems during the operation.

• If a problem is detected, the appliance may not operate and an error code is displayed even when any button is pressed.
• When this occurs, do not turn off the power and immediately contact the LG Electronics customer information centre. If you turn off the power, the repair technician from the LG Electronics customer information centre may have difficulty finding the problem.

SMART FUNCTIONS

EN

Using LG SmartThinQ Application

• For appliances with the 📄 or 📋 logo

Things to check before using LG SmartThinQ

1 Check the distance between the appliance and the wireless router (Wi-Fi network).

- If the distance between the appliance and the wireless router is too far, the signal strength becomes weak. It may take a long time to register or installation may fail.

2 Turn off the Mobile data or Cellular Data on your smartphone.

- For iPhones, turn data off by going to Settings → Cellular → Cellular Data.

3 Connect your smartphone to the wireless router.

- If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.

- The Wi-Fi connection may not connect or may be interrupted because of the home network environment.

- The network connection may not work properly depending on the Internet service provider.

- The surrounding wireless environment can make the wireless network service run slowly.

- The appliance cannot be registered due to problems with the wireless signal transmission. Unplug the appliance and wait about a minute before trying again.

- If the firewall on your wireless router is enabled, disable the firewall or add an exception to it.

- The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)

- Smartphone user interface (UI) may vary depending on the mobile operating system (OS) and the manufacturer.

- If the security protocol of the router is set to WEP, you may fail to set up the network. Please change it to other security protocols (WPA2 is recommended) and register the product again.

Installing LG SmartThinQ

Search for the LG SmartThinQ application from the Google Play Store or Apple App Store on a smart phone. Follow instructions to download and install the application.

NOTE

- To verify the Wi-Fi connection, check that Wi-Fi icon on the control panel is lit.

- The appliance supports 2.4 GHz Wi-Fi networks only. To check your network frequency, contact your Internet service provider or refer to your wireless router manual.

- LG SmartThinQ is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.

EN

Wi-Fi Function

Communicate with the appliance from a smart phone using the convenient smart features.

Firmware Update

Keep the appliance performance updated.

Smart Diagnosis™

If you use the Smart Diagnosis function, you will be provided with the useful information such as a correct way of using the appliance based on the pattern of use.

Settings

Allows you to set various options on the refrigerator and in the application.

NOTE

• If you change your wireless router, Internet service provider, or password, delete the registered appliance from the LG SmartThinQ application and register it again.
• The application is subject to change for appliance improvement purposes without notice to users.
  • Functions may vary by model.

Connecting to Wi-Fi

The Wi-Fi button, when used with the LG SmartThinQ application, allows the appliance to connect to a home Wi-Fi network. The Wi-Fi icon shows the status of the appliance's network connection. The icon illuminates when the appliance is connected to the Wi-Fi network.

Initial Appliance Registration

Run the LG SmartThinQ application and follow the instructions in the application to register the appliance.

Re-registering the Appliance or Registering Another User

Press and hold the Wi-Fi button for 3 seconds to temporarily turn it off. Run the LG SmartThinQ application and follow the instructions in the application to register the appliance.

NOTE

- To disable the Wi-Fi function, press and hold the Wi-Fi button for 3 seconds. Wi-Fi icon will be turned off.

Open Source Software Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [e-mail]. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

EN

Using Smart Diagnosis™

• For appliances with the or logo

Smart Diagnosis™ Through the Customer Information Centre

Use this function if you need an accurate diagnosis by an LG Electronics customer information centre when the appliance malfunctions or fails. Use this function only to contact the service representative, not during normal operation.

1 Press the Lock button to activate the lock function.

- If the display has been locked for over 5 minutes, you must deactivate the lock and then reactivate it.

2 Open the fridge door and then hold the phone on the upper right speaker hole.

- Position the phone so that its microphone is aligned with the speaker hole.

Technical line drawing of a mechanical assembly with a magnified inset showing internal components (no text or symbols)

3 Press and hold the Freezer button for three seconds or longer while continuing to hold your phone to the speaker.

4 After the data transfer is complete, the service agent will explain the result of the Smart Diagnosis™.

NOTE

- Position the phone so that its microphone is aligned with the speaker hole. - The Smart Diagnosis™ sound is generated after around three seconds.

- Hold the phone to the upper right speaker hole and wait while the data is transmitted.

- Do not take the phone off the speaker hole while the data is transmitted.

- The data transfer sound may be harsh to the ear while the Smart Diagnosis™ data is being transmitted, but do not take the phone off the speaker hole for accurate diagnosis until the data transfer sound has stopped.

- When the data transfer is complete, the transfer completion message is displayed and the control panel is automatically turned off and then on again after a few seconds. Afterwards the customer information centre explains the diagnosis result.

- The Smart Diagnosis™ function depends on the local call quality.

- The communication performance will improve and you can transmit a better signal if you use a land line home phone.

- If the Smart Diagnosis™ data transfer is poor due to poor call quality, you may not receive the best Smart Diagnosis™ service.

MAINTENANCE

EN

Notes for Cleaning

• When removing a shelf or drawer from inside the appliance, remove all stored foods from the shelf or drawer to prevent injury or damage to the appliance.
• Otherwise, injury may occur due to the weight of stored foods.
• If cleaning the outside air vents of the appliance by means of vacuuming, then the power cord should be unplugged from the outlet to avoid any static discharge that can damage the electronics or cause an electric shock.
• Detach the shelves and drawers and clean them with water, and then dry them sufficiently, before replacing them.
• Regularly wipe the door gaskets with a wet soft towel.
• Door basket spills and stains should be cleaned as they can compromise storage ability of the basket and could even be damaged.
  • After cleaning, check if the power cable is damaged, warm or improperly plugged.
• Keep the air vents on the exterior of the appliance clean.

- Blocked air vents can cause fire or appliance damage.

• Waxing external painted metal surfaces helps provide rust protection. Do not wax plastic parts. Wax painted metal surfaces at least twice a year using appliance wax (or auto paste wax). Apply wax with a clean, soft cloth.
• When cleaning the inside or outside of the appliance, do not wipe it with a rough brush, toothpaste, or flammable materials. Do not use cleaning agents containing flammable substances.

- This may cause discoloration or damage to the appliance.

- Flammable substances: alcohol (ethanol, methanol, isopropyl alcohol, isobutyl alcohol, etc.), thinner, bleach, benzene, flammable liquid, abrasive, etc.

• For the appliance exterior, use a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. Dry thoroughly with a soft cloth.
• Never clean the shelves or containers in the dishwasher.

- The parts may become deformed due to the heat.

- If the appliance is equipped with an LED lamp, do not remove lamp cover and LED lamp in any attempt to repair or service it. Please, contact an LG Electronics customer information centre.

Cleaning the Condenser Cover

Use a vacuum cleaner with a brush to clean the condenser cover and vents. Do not remove the panel covering the condenser coil area.

Hand inserting a plug into a computer drive panel (no text or symbols visible)

EN

Cleaning the Door Basket

Removing the Fridge/Freezer Door Basket

Hold both edges of the basket and remove it by lifting it upward.

Refitting the Fridge/Freezer Door Basket

1 Hold both edges of the door basket, gently push one edge to assemble, and then in the same manner assemble the other edge.

2 After assembling, tap the door basket gently to fix it horizontally.

Illustration of a hand holding a faucet with a downward arrow indicating force or pressure (no text or symbols)

Cleaning the Shelf

Removing the Fridge/Freezer Shelf Remove the shelf by pulling it out.

Refitting the Fridge/Freezer Shelf

Remove the shelf by pulling it out while slightly lifting the rear edge of the fridge shelf.

Cleaning the Vegetable Drawer

Removing the Vegetable Drawer

1 Remove the contents of the drawer. Hold the handle of the vegetable drawer and pull it out completely until it outward gently until it stops.

EN

2 Lift the vegetable drawer up and remove it by pulling it out.

Refitting the Vegetable Drawer

1 If the vegetable drawer has a cover, lift it.

2 Insert the bottom of the vegetable drawer into its original position and gently push it back in while lowering it.

CAUTION

- Please note that injuries can be caused by the weight of stored foods when removing the vegetable drawer.

TROUBLESHOOTING

EN

Symptoms Reason	Solution
There is no refrigeration or freezing.	Is there a power interruption?	·Check the power of other appliances.
	If the power plug unplugged from the outlet?	·Plug the power plug in the outlet properly.
There is poor refrigeration or freezing.	Is the fridge or freezer temperature set to its warmest setting?	·Set the fridge or freezer temperature to 'Medium'
	Is the appliance in direct sunlight, or is it near a heat generating object such as cooking oven or heater?	·Check the installation area and reinstall it away from heat generating objects.
	Did you store hot food without cooling it first?	·Cool the hot food first before putting it in the fridge or freezer compartment.
	Did you put in too much food?	·Maintain an appropriate space between food.
	Are the appliance doors completely closed?	·Completely close the door and make sure that stored food is not obstructing in the door.
	Is there enough space around the appliance?	·Adjust the installation position to make enough space around the appliance.
The appliance contains a bad smell.	Is the fridge or freezer temperature set to 'Warm'?	·Set the fridge or freezer temperature to 'Medium'
	Did you put in food with a strong smell?	·Store foods with strong smells in a sealed containers.
	Vegetables or fruit may have spoiled in the drawer?	·Throw away rotten vegetables and clean the vegetable drawer. Do not store vegetables too long in the vegetable drawer.
The inside lamp in the appliance does not turn on.	Does the inside lamp in the appliance turn off?	·It is not possible for customers to replace the inside lamp in the appliance as they are not serviceable. If the inside lamp does not turn on, please contact the LG Electronics customer information centre.

EN

Symptoms Reason	Solution
The appliance door is not closed tightly.	Is the appliance leaning forward?	Adjust the front feet to raise the front side slightly
	Were the shelves properly assembled?	Refit the shelves if needed.
	Did you close the door with excessive force?	If you apply too much force or speed when closing the door, it may remain briefly open before closing. Make sure that you do not slam the door closed. Close without force.
It is difficult to open the appliance door.	Did you open the door right after you closed it?	If you try to open the appliance door within one minute after you closed it, you may have difficulties because of the pressure inside the appliance. Try to open the appliance door again in a few minutes so that the internal pressure stabilizes.
There is condensation inside the appliance or on the bottom of the vegetable drawer cover.	Did you store hot food without cooling it first?	Cool the hot food first before putting it in the fridge or freezer compartment.
	Did you leave the appliance door open?	Although the condensation will disappear soon after you close the appliance door, you can wipe it with a dry cloth.
	Do you open and close the appliance door too frequently?	Condensation can form due to the temperature difference from the outside. Wipe out the dampness with a dry cloth.
	Did you put warm or moist food inside without sealing it in a container?	Store food in a covered or sealed container.
Frost has formed in the freezer compartment.	Doors may not be closed properly?	Check if the food item inside the appliance is blocking the door and make sure that the door is tightly closed.
	Did you store hot food without cooling it first?	Cool the hot food first before putting it in the fridge or freezer compartment.

EN

Symptoms Reason	Solution
Frost has formed in the freezer compartment.	Is the air entry or exit of the freezer compartment blocked?	Make sure that air entry or exit is not blocked so that the air can circulate inside.
	Is the freezer compartment overfilled?	Maintain an appropriate space between items.
Frost or condensation has formed inside or outside the appliance.	Did you open and close the appliance door frequently or is the appliance door improperly closed?	Frost or condensation can form if the outside air penetrates inside the appliance.
	Is the installation environment humid?	Condensation can appear on the exterior of the appliance if the installation area is too humid or on a humid day such as a rainy day. Wipe off any moisture with a dry cloth.
The appliance is noisy and generates abnormal sounds.	Is the appliance installed on a weak floor or improperly levelled?	Install the appliance on a solid and flat area.
	Does the rear of the appliance touch the wall?	Adjust the installation position to allow enough clearance around the appliance.
	Are objects scattered behind the appliance?	Remove the scattered objects from behind the appliance.
	Is there an object on top of the appliance?	Remove the object on top of the appliance.
The side or front of the appliance is warm.	There are anti condensation pipes fitted to these areas of the appliance to reduce condensation forming from around the door area.	The heat releasing pipe to prevent condensation is installed on the front and side of the appliance. You may feel it particularly hot right after the appliance is installed or during the summer. You can be assured that this is not a problem and is quite normal.
There is water inside or outside of the appliance.	Is there water leakage around the appliance?	Check if the water has leaked from a sink or another place.
	Is there water on the bottom of the appliance?	Check if the water is from the thawed frozen food or a broken or dropped container.

EN

Symptoms Reason	Solution
The automatic icemaker does not produce ice or produces a small amount of ice.	Did you install the appliance recently?	· The ice maker produces ice normally when approximately 48 hours have passed after the appliance is installed.
	Did you connect the water supply pipe to the appliance and open the supply valve?	· Connect the water supply pipe to the appliance and open the supply valve completely.
	Is the water supply hose bent?	· If the water supply hose is bent, the water flow could be compromised.
	Have you dispensed a large amount of ice recently?	· It takes approximately 24 hours to produce more ice in the automatic icemaker. Please wait.
	Did you set the ice maker switch or the automatic icemaker button on the control panel to ON?	· Press I on the automatic icemaker switch or set ON for the automatic icemaker button on the control panel. (For more details on how to use, visit LG electronics website or use your smart device.)
	Is the temperature of the freezer compartment set too high?	· If the set temperature is too warm, ice will be produced slowly or not at all. Set the Freezer temperature to -18 °C for normal operation of the automatic icemaker.
	Have you been opening the appliance door frequently?	· If you open the appliance door frequently, cold a will escape, lowering the speed of ice production. Do not open and close the appliance door frequently.
	Is the appliance door completely closed?	· If the appliance door is not completely closed, the temperature of the freezer compartment will increase, slowing down the ice production speed. Close the appliance door completely.
Ice is not dispensed.	Is there ice in the ice bin?	· Check whether there is ice in the ice bin.
	Is the ice clumped in the ice bin?	· Separate the ice bin and shake it. Discard the remaining clumped ice after shaking the ice bin.

EN

Symptoms Reason	Solution
Ice is not dispensed.	Unable to hear the sound of ice coming out?	In the control panel, select the modes for cubed ice and crushed ice alternately to dispense the ice.
Water does not come out.	Is the water supply valve closed? (For plumbed models only)	Open the water supply valve.
Water tastes strange.	Is the taste of water different when comparing it with the taste of water from the previous water purifier?	Has the purified water or cold water not been used for an extended period of time?
	Has it been a long time since you installed and replaced the filter?	If an expired filter is used, the purification performance may decline. It is recommended to replace the filter according to the filter replacement period.
	Have you flushed out the filter properly in the initial stage after installing it?	When you install or replace the filter for the first time, you need to remove air and activated carbon residue from inside the filter. Use the appliance after dispensing and discharging approximately 5 litres of purified water from the dispenser by pressing the water dispensing lever. (Activated carbon is harmless to humans.)
	Has the purified water or cold water not been used for an extended period of time?	The taste of old water may change due to bacterial growth. Use the product after dispensing and discharging approximately 5 litres (approximately three minutes) from the water dispenser.

EN

Symptoms Reason	Solution
Clicking noises	The defrost control will click when the automatic defrost cycle begins and ends. The thermostat control (or appliance control on some models) will also click when cycling on and off.	Normal Operation
Rattling noises	Rattling noises may come from the flow of appliance, the water line on the back of the unit (for plumbed models only), or items stored on top of or around the appliance.	Normal Operation
	Appliance is not resting evenly on the floor.	Floor is weak or uneven or levelling legs need to be adjusted. See the Door Alignment section.
	Appliance with linear compressor was moved while operating.	Normal operation. If the compressor does not stop rattling after three minutes, turn the power to the appliance off and then on again.
Whooshing noises	Evaporator fan motor is circulating air through the fridge and freezer compartments.	Normal Operation
	Air is being forced over the condenser by the condenser fan.	Normal Operation
Gurgling noises	Appliance flowing through the cooling system	Normal Operation
Popping noises	Contraction and expansion of the inside walls due to changes in temperature.	Normal Operation
Vibrating	If the side or back of the appliance is touching a cabinet or wall, some of the normal vibrations may make an audible sound.	To eliminate the noise, make sure that the sides and back do not make any contact with any wall or cabinet.

EN

Symptoms Reason Solution
Your home appliance and smartphone is not connected to the Wi-Fi network.	The password for the Wi-Fi that you are trying to connect to is incorrect.	· Find the Wi-Fi network connected to your smartphone and remove it, then register your appliance on LG SmartThinQ.
	Mobile data for your smartphone is turned on.	· Turn off the Mobile data of your smartphone and register the appliance using the Wi-Fi network.
	The wireless network name (SSID) is set incorrectly.	· The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)
	The router frequency is not 2.4 GHz.	· Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4 GHz and connect the appliance to the wireless router. To check the router frequency, check with your Internet service provider or the router manufacturer.
	The distance between the appliance and the router is too far.	· If the distance between the appliance and the router is too far, the signal may be weak and the connection may not be configured correctly. Move the location of the router so that it is closer to the appliance.

Memo

РУКОВОДСТВО

ПОЛЬЗОВАТЕЛЯ

ХОЛОДИЛЬНИК С

МОРОЗИЛЬНЫМ

ОТДЕЛЕНИЕМ

Line drawing of a double door refrigerator with front and back panels (no text or symbols)

Line drawing of a double door with front panel and side door, no text or symbols present

Line drawing of a rectangular container with multiple circular indentations inside (no text or symbols)

Line drawing of a rectangular ice cream mold with multiple cavities and a base (no text or symbols)

A B C D E F G

Pure mechanical diagram showing a lever and base assembly without any text, numbers, or symbols

Diagram showing a hand using a tool to adjust or remove a component, with an inset magnified view highlighting the mechanism.

Technical line drawing of a mechanical component or tool (no text or symbols visible)

ОСТОРОЖНО!

Pure mechanical diagram showing a bracket with an arrow and a separate component (no text or symbols)

Установка двери

Diagram illustrating a mechanical or electrical setup with labeled components and directional arrows indicating motion or force.

Diagram illustrating a mechanical system with rotating components and a magnified view showing rotational motion.

-88°C Fridge - Freezer - Hygiene Fresh - Express Freeze * Wi-Fi * Lock * Extra Function : Hold 3sec.

-88°C -88°C Fridge + Freezer - *Wi-Fi - Express Freeze - *Lock * *Extra Function : Hold 3sec.

Illustration of a hand inserting a card into a device (no text or symbols visible)

Line drawing of a small lamp on a grid-patterned table (no text or symbols)

Line drawing of a hand using a tool to press or spread a grid on a griddle (no text or symbols)

Извлечение льда

Line drawing of a hand inserting a device into a machine (no text or symbols)

Illustration of hands holding a grid device with a curved arrow indicating rotation (no text or symbols)

ОСТОРОЖНО!

Illustration of hands operating a mechanical device with arrows indicating motion (no text or symbols)

Illustration of hands holding a rectangular object with arrows indicating movement or force (no text or symbols)

ОСТОРОЖНО!

Hand inserting a component into a rectangular device (no text or symbols visible)

Diagram illustrating a hand holding a tool with an upward arrow, showing a step and magnified view of the process.

Diagram of a refrigerator with double door and side windows, showing upward arrows indicating ventilation or movement (no text or symbols)

Illustration of a refrigerator with an open door and a magnified inset showing hand positioning (no text or symbols)

Type 1 Type 2

ПРИМЕЧАНИЕ

Isometric illustration of a rectangular frame with a hand touching its surface (no text or symbols)

Technical line drawing of a mechanical assembly with a magnified inset showing a component detail (no text or symbols)

Hand inserting a USB into a computer drive (no text or symbols visible)

RU

Diagram of a hand holding a mechanical component with a downward arrow indicating force or direction (no text or symbols present)

Очистка полок

Using Control Panel (boshqaruv panelidan foydalanish)....21

Muz Tayyorlagich (*) 23

Door in Door (*) 25

Yangi sabzavotlar tortma qutisi (*) 26

InstaView funksiyasi (*) 26

Front view line drawing of a double refrigerator with door, front panel, and side shelf (no text or symbols)

Line drawing of a double door with front panel and side door, no text or symbols present

Line drawing of a rectangular container with multiple circular indentations inside (no text or symbols)

Line drawing of a rectangular ice cream mold with multiple cavities (no text or symbols)

Line drawing of a mechanical wrench (no text or symbols)

Olinadigan tuxum qutichasi (*)
Muz lotogi (*) Gayka klyuchi

Foydalanuvchi qo' Ilanmasi

- Jihozning ko‘rinishi va uning qismlari uning modeliga qarab farqlanishi mumkin.

UZ

O'Ichamlar va oraliqlar

Tegishli buyumlar bilan oralig'i juda kichkina bo'lsa, muzlatish samarasi pasayishi va elektr xarajati ortishi mumkin. Jihozni o'rnatishda har tomondagi devordan kamida 50 mm oraliq qoldiring.

A B C D E F G

- O'Ichami
A 912 mm
B 1790 mm
C 738 mm
D 10 mm
E 728 mm
F 1180 mm
G 1750 mm

Atrof-muhit harorati

- Jihoz iqlim zonasiga bog'liq ravishda atrofdagi haroratlarning cheklangan diapazonida ishlashga mo'ljallangan.

- Ichki haroratga jihoz o'rnatilgan joyi, atrof-muhitdagi harorat, eshikning qancha ochilib-yopilishi va boshqalar ta'sir ko'rsatadi.

- Iqlim sinfini pasport taxtachasida ko'rish mumkin.

Iqlim sinfi	Atrof-muhit harorati diapazoni °C
SN (Me'yordan past iqlim)	+10 - +32
N (O'rtacha iqlim) +16 - +32
ST (Subtropikal) +16 - +38
T (Tropik) +16 - +43 / +10 - +43*

*Avstraliya, Hindiston, Kenya

Izoh

- SN dan T gacha ko'rsatilgan moslamalar 10 °C - 43 °C atrof haroratida foydalanishga mo'ljallangan.

UZ

Technical line drawing of a mechanical setup with a lever and base plate (no text or symbols)

2 Elektr konnektorlar ulagichi ilmog'ini (1) bosib turgan holda har ikki tomonga tortib, u ulagichlarni chiqarib oling.

Technical diagram showing mechanical assembly with labeled parts and a magnified inset view of a component detail.

3 Uning uchini jihoz korpusi qirrasi tomon bosgan holda oshiq-moshiq dastagini olib tashlang.

Line drawing of a mechanical component with a lever and handle (no text or symbols)

DIQQAT

- Yuqoridagi oshiq-moshiqni olib tashlashda jihoz eshigini ushlab turing, chunki u oldinga qulashi mumkin. Eshikni olish yoki o'rnathsha ikki yoki undan ortiq odam uni ushlab turishi tavsiya etiladi.

4 Jihoz va uning eshigi orasidagi yuqorigi oshiq-moshiqni tepaga ko'taring va eshikni yechib oling.

Yuqorigi oshiq-moshic Eshik

5 Muzlatgich va sovitkich xonasining eshigini yuqoriga ko'tarib olib tashlang. Ayni paytda po'lat quvurni to'liq chiqarib olish uchun eshik etarli darajada ko'tarilishi kerak.

Pure mechanical diagram showing a bracket with an arrow indicating direction, no text or symbols present

Diagram illustrating a mechanical or electrical setup with labeled components and directional arrows indicating motion or force.

Agar muzlatkich bo'Imasi eshigi sovutkich bo'Imasi eshigidan yuqoriroq bo'Isa

Jihoz eshigining o'ng pastki qismi tagidagi murvatga buragichni qo'yib, soat strelkasi yo'nalishi bo'yicha buragan holda eshik balandligini rostlang.

Diagram illustrating a mechanical system with pulley and rotating arm, including magnified view of rotation direction.

Jihozni ulash

Jihozni o'rnatgandan keyin elektr shnurini devordagi rozetkaga ulang.

Izoh

- Rozetkaga elektr kabelini (yoki sanchqini) ulagandan so'ng, jihoz ichiga oziq-ovqat mahsulotlarini qo'yish uchun 2 yoki 3 soat kuting. Agar jihoz to'liq sovib olgunga qadar uning ichiga oziq-ovqat mahsulotlari solinsa, ular aynib qolishi mumkin.

Jihozni ko'chirish

1 Jihoz ichidagi barcha oziq-ovqat mahsulotlarini chiqarib oling.
2 Elektr shnuri vilkasini rozetkadan uzing, elekt shnurini jihozning orqa yoki ust tarafidagi elekrt shnuri ilgagiga kirgazing va qotirib qo'ying.
3 Jihozni ko'chirish vaqtida ularning yiqilib ketmasligi uchun polkalar va eshik dastasi kabi qismlarni tasma bilan mahkamlang.
4 Jihozni ikki yoki undan ko'proq kishi yordamida ehtiyotlik bilan siljiting. Jihozni uzoq masofaga tashiganda jihozni tik holda ushlang.
5 Jihozni o'rnatgandan keyin uni yoqish uchun elektr shnuri vilkasini devordagi rozatkaga tiqing.

Ishlatish

UZ

Qismlar va funksiyalar

Korpus

1 2 3

1 4 3

1 Boshqaruv paneli

Muzlatkich va sovutkich haroratini o'rnatish

② Door-in-Door (Eshikdagi eshik) (\*)

3 Door-in-Door (Eshikdagi eshik) richagi (\*)

Bu dastak Door in Door (eshikdagi eshikni) ochadi.

4 InstaView Door-in-Door (Eshikdagi eshik) (\*)

The InstaView Door-in-Door (Eshikdagi eshik) bo'lmasi odatiy ishlatiladigan oziq-ovqat mahsulotlarini oson olish imkoniyatini beradi.

Izoh

Using Control Panel (boshqaruv panelidan foydalanish)

Units and Functions (birliklar va funksiyalar)

-1-tur> <2-tur> -88°C Fridge - Freezer - Hygiene Fresh - Express Freeze * Wi-Fi * Lock * Extra Function : Hold 3sec.

-88°C -88°C Fridge 1 Freezer *Wi-Fi 2 Express Freeze 5 Lock 4 *Extra Function : Hold 3sec. *Lock

1 Fridge Temperature (sovutkich harorati)

Setting the Temperature (haroratni o'rnatish)

Bu sovutkich yoki muzlatkich haroratini o'rnatadi.

Haroratni sozlash uchun Fridge yoki Freezer tugmasini bosing.

• Haroratni quyidagicha sozlanishi mumkin.

- Sovutkich: 1°C dan 7°C gacha

- Muzlatkich: -14°C dan -24°C gacha

- Joriy ichki harorat jihoz ichidagi oziq-ovqat mahsuloti holatiga qarab o'zgaradi, chunki ko'rsatilgan o'rmatilgan harorat jihozning joriy harorati emas, balki ko'zlangan haroratidir.

Izoh

- O'rnatiladigan dastlabki haroratni jihozdan kelib chiqgan holda o'zgarishi mumkin.

- Jihozni rozetkaga ulagandan so'ng ikki yoki uch soat o'tishini kuting va so'ng'ra unga oziq-ovqat mahsuloti soling.

Setting Hygiene Fresh (toza gigiyena funksiyasini o'rnatish)

Hygiene Fresh (toza gigiyena) funksiyasi jihoz ichidagi bakteriyalar va turli hidlarning eng kam bo'lishini ta'minlaydi. Biroq bu funksiya oziq-ovqat mahsulotiga singib ketgan bakteriya emas, balki jihoz ichida yurgan bakteriyalar uchun amal qiladi.

- Har safar Hygiene Fresh tugmasi bosilganda, muqobil tarzda Gigiyenik toza funksiyasi rejimi Auto (Avtomatik) → Power (QUVVAT) → Off (O'CHIRISH) → Auto (Avtomatik) ga o'zgaradi.

Express Freeze (ekspress muzlatish) funksiyasini o'rnatish

Bu funksiya ko'p miqdordagi muz yoki mizlagan oziq-ovqat mahsulotlarini tez muzlatish imkonini beradi.

• Express Freeze tugmasi bosilganda boshqaruv panelidagi Express Freeze belgisi chiroqlari yonadi.
• Bu funksiya mazkur tugmani har bosganingizda navbatma-navbat o'chib yonadi.
• Express Freeze (ekspres muzlatish) funksiyasi ma'lum vaqt o'tganidan so'ng avtomatik tarzda o'chadi.

Setting and Resetting Lock (qulfni o'rnatish va bekor qilish)

Illustration of a hand inserting a card into a machine (no text or symbols visible)

2 Barcha kubchalar bir xil darajada to'la bo'lishi uchun muz idishini suv bilan to'ldiring.

Line drawing of a container with a lid pouring liquid into it (no text or symbols)

3 Muz idishni joyiga ehtiyotkorlik bilan qo'ying, suvni polga to'kib yubormang.

DIQQAT

- Muz idishini suv bilan to'dirgandan keyin joylashtirishda suvni to'kib yubormaslik uchun ehtiyot bo'ling.

<2-tur>

Hand placing a piece of sugar into a grid-patterned cube (no text or symbols)

Taking Out Ice (muzni olish)

<1-tur>

1 Muz tayyorlagichning ajratuvchi dastagini soat strelkasi yo'nalishi bo'ylab aylantiring.

2 Muz saqlanuvchi idishni sal ko'tarib chiqarib oling.

Illustration of a hand pressing down on a mechanical device (no text or symbols visible)

<2-tur>

Muz idishini har ikkala uchidan ushlang va astalik bilan qiyshaytiring.

Illustration of hands holding a keyboard with motion lines indicating movement (no text or symbols)

DIQQAT

- Agar muzlatkich eshigini tez-tez ochib yopsangiz, suvning muzlashi uzoqroq vaqt talab qilishi mumkin.

- Faslga bog'liq tarzda suvning muzlash vaqtida ozroq farq bo'lishi mumkin. Jihoz dastlab o'rnatilgan paytdan boshlab 24 soat o'tgunga qadar uning ichidagi harorat barqarorlashmaslgi mumkin, shuning uchun suv muzlashiga ko'proq vaqt kerak bo'lishi mumkin.

Illustration of hands pressing down on a mechanical component (no text or symbols visible)

2 Muz idishi bo'lmasining har ikkala tomonini ushlang va yuqoriga tortish orqali uni chiqarib oling.

Illustration of hands installing or adjusting a door panel (no text or symbols visible)

DIQQAT

• Shu tartibda chiqarib oling. Avval muz idishini chiqarib olish zararlanishga olib kelishi mumkin.
• Muz tayyorlagichni ajratishda muz idishining yiqilib ketishining oldini olish uchun uni to'g'ri ushlab va chiqarib oling.

Izoh

Line drawing of a hand inserting a component into a device (no text or symbols)

2 Tozalagandan keyin uni asl holatiga chiqarib oling.

! DIQQAT

Diagram illustrating a hand holding a tool with an upward arrow, showing a step and directional view.

Removing the Case from the Door in Door (eshikdagi eshikdan jildni olib tashlash)

Eshikdagi eshikda turgan jildni ichki tarafından ikki qo'l bilan ushlang va tepaga ko'targan holda yechib oling.

Refitting the Door in Door Case (eshikdagi eshikka jildni qayta joylash)

Olib tashlash jarayonining aksini bajargan holda uni o'z joyiga o'rnating.

Eshikdagi eshikdan savatchalarni olib tashlash

1 Savatchaning har ikkala tomonini ushlang va tepaga ko'targan holda uni chiqarib oling.

Diagram of an open refrigerator with a magnified inset showing hand positioning on the door (no text or symbols present)

2 Qotirilgan savatchani (1) da ko'rsatilgani kabi tepaga ko'taring va uni (2) da ko'rsatilgani kabi tashqariga tortish orqali chiqarib oling.

(1) (2)

Type 1 Type 2

Izoh

Simple line drawing of a framed picture frame with a hand holding a small object (no text or symbols)

1 Door in Door (eshik ichidagi eshik) ichidagi LED-chiroqni yoqish yoki o'chirish uchun oynani ikka marta taqillating.

2 LED-chiroq o'n soniyadan so'ng avtomatik tarzda o'chadi.

- Sovutkichning o'ng eshigi va muzlatkichning chap eshigi ochiq bo'lganda, eshik yopilishi bilan 2 soniya davomida va muz aralashtirgichdan foydalanilayotgan paytda InstaView Door-in-Door funksiyasi o'chiq bo'ladi.

Technical line drawing of a mechanical assembly with a magnified inset showing internal components (no text or symbols)

3 Telefonni karnayga yaqinlashtirgan holda Freezer tugmasini kamida uch soniya bosib turing.

4 Axborot uzatish tugallangach, xizmat vakili Smart Diagnosis™ natijasini sizga tushuntiradi.

Izoh

• Telefon mikrofoni karnay teshigi ro'parasida tursin.
• Smart Diagnosis™ tovushi uch soniyadan so'ng chiqadi.
• Telefonni yuqori o'ngdagi karnay teshigi oldida tuting va axborot uzatilishini kutib turing.

- Axborot uzatilayotgan paytda telefonni karnaydan uzoqlashtirmang.

- Smart Diagnosis™ axboroti uzatilayotgan paytda uning tovushi yoqimsiz bo'lishi mumkin, ammo diagnostika aniq bo'lishi uchun axborot uzatilib bo'lgunicha telefonni karnaydan uzoqlashtirmang.

- Axborot uzatish tugallangach, xabar ko'rsatiladi va boshqaruv paneli avtomatik ravishda o'chib, bir necha soniyadan so'ng yana yonadi. Shundan so'ng mijozlarga axborot berish markazi diagnostika natijasini tushuntiradi.

- Smart Diagnosis™ (Aqlli tashxis) funksiyasi mahalliy aloqa sifatiga bog'liq.

Hand inserting a button into a computer monitor (no text or symbols visible)

UZ

Cleaning the Door Basket (eshik savatchasini tozalash)

Removing the Fridge/Freezer Basket (sovutkich/muzlatkich savatchasini olish)

Savatchaning har ikkala tomonini ushlang va tepaga ko'targan holda uni chiqarib oling.

Refitting the Fridge/Freezer Basket (sovutkich/muzlatkich savatchasini qayta joylash)

1 Eshik savatchasining har ikkala tomonini ushlang, bir uchini sekin bosib joyiga tushiring va keyin huddi shu yo'l bilan narigi uchini o'rnating.

2 O'rnatib bo'lgandan so'ng eshik savatchasini gorizontal joylashishi uchun uni sekin bosing.

Hand holding a mechanical component with a downward arrow indicating force or direction (no text or symbols)

Tokchani tozalash

Removing the Fridge/Freezer Shelf (sovutkich/muzlatkich tokchasini olish)

Tokchani tashqariga tortib chiqaring.

Refitting the Fridge/Freezer Shelf (sovutkich/muzlatkich tokchasini qayta joylash)

Sovutkich tokchasining orqa qirrasini sal ko'targan holda tokchani tashqariga tortib chiqaring.

Cleaning the Vegetable Drawer (sabzavotlar tortmasini tozalash)

Removing the Vegetable Drawer (sabzavotlar tortmasini olish)

1 Tortma ichiga narsalarni olib tashlang. Sabzavotlar tortmasi dastasini ushlang va u to'xtagunga qadar oxirigacha sekin tortib chiqaring.

UZ

2 Sabzavotlar tortmasini tepaga ko'taring va tashqariga chiqarib oling.

Refitting the Vegetable Drawer (sabzavotlar tortmasini qayta joylash)

1 Agar sabzavotlar tortmasining qopqog'i bo'lsa, uni ko'taring.