HN-704N - Oven Infiniton - Free user manual and instructions

USER MANUAL HN-704N Infiniton

Exterior view of a modern kitchen oven with control knobs and a HILECTIC logo (no text or symbols on main body)

Manual del usuario

modelo: HN-704N

AGRADECIMIENTOS

Pure geometric diagram of a rectangular plate with diagonal lines, no text or symbols present

Pure diagram of a container with horizontal lines and a wavy top section, no text or symbols present.

Technical line drawing of a rectangular frame with internal grid pattern (no text or symbols)

Technical line drawing of a multi-tiered metal frame structure (no text or symbols)

Technical line drawing of a mechanical enclosure or enclosure with internal components (no text or symbols)

O

Technical line drawing of a multi-tiered oven or storage unit (no text or symbols)

Simple line drawing of a container with a rotating arrow, no text or symbols present

Diagram showing a mechanical assembly with labeled parts A and B, including directional arrows and a dashed circular diagram.

Technical diagram of an electronic device with labeled ports and a close-up inset showing component labels N and L.

INSTALACIÓN

G560 A595 B595 C575

F570 min. 80 100 250 E600 H560 D606

Symbol of a waste bin with no text or labels, crossed by two diagonal lines and a solid rectangle below (no readable text or symbols)

Exterior view of a modern electric stove oven with dual control knobs (no visible text or symbols)

User Manual

model: HN-704N

ACKNOWLEDGMENT

Thank you for purchasing our product. We hope you enjoy using the many features and benefits it provides. Before using this product please study this entire Instruction Manual carefully. Keep this manual in a safe place for future reference. Ensure that other people using the product are familiar with these instructions as well.

WARNING

When the oven is first switched on, it may give off an unpleasant smell. This is due to the bonding agent used for the insulating panels within the oven. Please run up the new empty product with the conventional cooking function, 250 °C, 90 minutes to clean oil impurities inside the cavity.
During the first use, it is completely normal that there will be a slight smoke and odors. If it does occur, you merely have wait for the smell to clear before putting food into the oven.
➢ Please use the product under the open environment.
The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised.
If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
During use, the appliance becomes very hot. Care should be taken to avoid touching heating elements inside the oven.
Do not allow children to go near the oven when it is operating, especially when the grill is on.

During use, the appliance becomes very hot. Care should be taken to avoid touching heating elements inside the oven.
Do not allow children to go near the oven when it is operating, especially when the grill is on.
➢ Ensure that the appliance is switched off before replacing the oven lamp to avoid the possibility of electric shock.
The means for disconnection must be incorporated in the fixed wiring in accordance with the wiring specifications.
Children should be supervised to ensure that they do not play with the appliance.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by person responsible for their safety.
- Accessible parts may become hot during use. Young children should be kept away.
An all-pole disconnection means must be incorporated in the fixed wiring in accordance with the wiring rules.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass.
A steam cleaner is not to be used.
The appliances are not intended to be operated by means of an external timer or separate remote-control system.
The instructions for ovens that have shelves shall include details indicating the correct installations of the shelves.
This oven is designed for domestic use indoors. If it was used for other purposes, or be given misuse, the two-year warranty will void.

SAFETY HINTS

Do not use the oven unless you are wearing something on your feet. Do not touch the oven with wet or damp hands or feet.
For oven: Oven door should not be opened often during the cooking period.
The appliance must be installed by an authorized technician and put into use. The producer is not responsible for any damage that might be caused by defective placement, and installation by unauthorized personnel.
When the door or drawer of oven is open do not leave anything on it, you may unbalance your appliance or break the door.
Some parts of appliance may keep its heat for a long time; it is required to wait for it to cool down before touching onto the points that are exposed to the heat directly.
If you will not use the appliance for a long time, it is advised to plug it off.

FITTING THE OVEN INTO THE KITCHEN UNIT

Fit the oven into the space provided in the kitchen unit; it may be fitted underneath a work top or into an upright cupboard. Fix the oven in position by screwing into place, using the two fixing holes in the frame. To locate the fixing holes, open the oven door and look inside. To allow adequate ventilation, the measurements and distances adhered to when fixing the oven.

IMPORTANT

If the oven is to work properly, the kitchen housing must be suitable. The panels of the kitchen unit that are next to the oven must be made of a heat resistant material. Ensure that the glues of units that are made of veneered wood can with stand temperatures of at least 120 °C. Plastics or glues that cannot withstand such temperatures will melt and deform the unit, once the oven has been lodged inside the units, electrical parts must be completely insulated. This is a legal safety requirement. All guards must be firmly fixed into place so that it is impossible to remove them without using special tools. Remove the back of the kitchen unit to ensure an adequate current of air circulates around the oven. The hob must have a rear gap of at least 45 mm.

DECLARATION OF COMPLIANCE

When you have unpacked the oven, make sure that it has not been damaged in any way. If you have any doubts at all, do not use it: contact a professionally qualified person. Keep packing materials such as plastic bags, polystyrene, or nails out of the reach of children because these are dangerous to children.

C€

INSTRUCTION FOR USE

• To set the functions turn the control knob to the desired function.
• To adjust the temperature, turn the temperature knob.

The oven will automatically plug after activating the function and temperature.

- If the oven is not in use, always set all the controls to "0"

PRODUCT DESCRIPTION

Function knob Temperature knob Temperature indicator

Simbol	Description
	Oven light: Control the cooking progress without opening the oven door. except ECO function
	Top heat: The top element is working
	Conventional cooking: heaters top and bottom uniformly heat the exposed food .Hornear and roasting is possible only at the individual level
	Bottom heat: The heat is achieved by the bottom of the oven. This feature is available for slow cooking or heating food.
	For energy-saved cooking. Cooking the selected ingredients in a gentle manner, and the heat comes from the top and the bottom.

Recipes for ECO mode

Recipes Temperature ( ) Level Time (min)		Pre-heat
Potato Cheese Gratin	180 1 90-100 No
Cheese Cake	160 1 100-150 No
Meatloaf 190	1 110-130 No

ACCESSORIES

Wire shelf : For grill .dishes, cake pan with items for roasting and grilling.

Pure geometric diagram of a rectangular plate with diagonal lines, no text or symbols present

Slider bracket : These shelf support rails on the right and left sides of the oven can be removed for cleaning oven walls. (only for specific modles)

Pure diagram of a container with horizontal lines and a wavy top section, no text or symbols present.

Universal pan: For cooking large quantities of food such as moist cakes, pastries, frozen food etc, or for collecting fat/ spillage and meat juices.

Technical line drawing of a rectangular frame with internal grid pattern (no text or symbols)

Telescopic runner: Some of models might with telescopic runners to facilitate the use of oven.

These telescopic runners could be disassembled for cleaning by unscrew the screws use to fix it.

(only for specific modles)

Technical line drawing of a multi-tiered metal frame structure (no text or symbols)

SHELF PLACEMENT WARNING:

To ensure the oven shelves operate safely, correct placement of the shelves between the side rail is imperative. This will ensure that during careful removal of the shelf or tray, hot food items should not slide out.

Technical line drawing of a mechanical oven or enclosure with internal compartments and ventilation duct (no text or symbols)

OR

Technical line drawing of a multi-tiered oven or storage unit (no text or symbols visible)

BULB REPLACEMENT

For replacement, process as follows:

1>.Disconnect power from the mains outlet or switch off the circuit breaker of the unit's mains outlet.
2>.Unscrew the glass lamp cover by turning it counter-clockwise (note, it may be stiff) and replace the bulb with a new one of the same type.
3>.Screw the glass lamp cover back in place.

NOTE: Only use 25-40W/220V-240V, T300°C halogen lamps.

Simple line drawing of a container with a mesh top and circular arrow indicating rotation (no text or symbols)

SECURING THE OVEN TO THE CABINET

1. Fit oven into the cabinet recess.
2. Open the oven door.
3. Secure the oven to the kitchen cabint with two distance holders "A" which fit the holes in the oven frame and fit the two screws "B".

Technical diagram showing a mechanical assembly with labeled components A and B, including directional arrows indicating movement or force.

VENTILATING OPENINGS

When cooking is finished, if the temperature of ventilating openings is over 70 degree, the cooling fan will continue working. The cooling fan will not stop working until the temperature becomes lower than 60 degree.

Ventilating openings

CONNECTION OF THE OVEN

Technical diagram of an electronic device with labeled ports and a close-up inset showing component labels N and L.

INSTALLATION

G560 A595 B595 C575

F570 min. 80 100 250 E600 H560 D606

Remark:

1. Only plus deviations are admissible for all dimension.

2. The cabinet is not include the power switch or socket.

NOTE: The number of accessories included depends on the particular appliance purchased.

MiLECTRIC

Forno elétrico

Exterior view of a black oven with control knobs and a 'HELECTRIC' logo (no other text or symbols)

Manual do usuário

model: HN-704N

RECONHECIMENTO

Pure geometric diagram of a rectangular plate with diagonal lines, no text or symbols present

Pure diagram of a container with horizontal lines and a wavy top section, no text or symbols present.

Technical line drawing of a rectangular frame with internal hexagonal grid pattern (no text or symbols)

Technical line drawing of a multi-tiered metal frame structure (no text or symbols)

Technical line drawing of a mechanical oven or enclosure with internal compartments and ventilation duct (no text or symbols)

OR

Technical line drawing of a multi-tiered oven or storage unit (no text or symbols visible)

Simple line drawing of a container with a circular arrow indicating rotation (no text or symbols)

ASSEGURANDO O FORNO AO ARMÁRIO

Technical diagram showing a mechanical assembly with labeled components A and B, including directional arrows indicating movement or force.

ABERTURAS VENTILADORAS

Technical diagram of a device with labeled components including ports, buttons, and a connector labeled N and L.

INSTALAÇÃO

G560 A595 B595 C575

F570 min. 80 100 250 E600 H560 D606

Remark:

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or recycling (no text present)

CERTIFICACION CE