Vancouver - Home PRINCESS - Free user manual and instructions

Product Type	Suitcase with built-in scale and combination lock
Brand	Princess
Model	Vancouver
Lock Type	3-digit combination lock (pull and push mechanisms)
Default Code	0-0-0
Scale Type	Integrated LCD digital scale
Max Weight Capacity (Size S)	10 kg
Max Weight Capacity (Size M)	15 kg
Max Weight Capacity (Size L)	20 kg
Weight Tolerance	±2.5 kg
Scale Units	kg and lbs (toggle via KG/LBS button)
Battery Type	CR2032 (A-brand)
Battery Location	Rear side of the scale, inside the suitcase, behind a sliding cover
Charger	Removable power box charger; can be used separately
Charger Access	Open inner zipper, slide out charger unit; lock sliding cover after removal
Safety Precautions	Do not expose to rain or humidity; use only CR2032 batteries
Maintenance	Replace battery if scale does not respond or displays 'LO'; clean with dry cloth
Spare Parts	CR2032 battery (user-replaceable)
Intended Use	Home travel luggage with weighing and security features

Frequently Asked Questions - Vancouver PRINCESS

How do I set the combination lock on my Princess Vancouver suitcase?

To set the combination lock, start with the default code 0-0-0. Press the A button in the direction of the arrow, and while holding it, rotate the three wheels (B) to your desired 3-digit code. Release the button to lock in your new code. Ensure you do not release the button while setting the code.

How do I weigh my suitcase using the built-in scale?

Place the suitcase on a flat surface with the LCD screen facing upward. Press the ON/OFF button; wait for '0' to appear. Lift the suitcase by the side handle and hold it steady. The weight will display after a few seconds. Press ON/OFF again to turn off.

What battery does the suitcase scale use and how do I replace it?

The scale uses an A-brand CR2032 battery. If the scale does not respond or shows 'LO', replace the battery. The battery compartment is on the rear side of the scale, inside the suitcase. Slide open the cover, replace the battery observing polarity, and close the cover.

How do I switch between kilograms and pounds on the scale?

Press the button marked KG/LBS to toggle the LCD display between kilograms and pounds. The current unit will be shown on the screen.

How do I remove the charger from the suitcase?

Open the inner zipper inside the suitcase. If it is your first time, cut the zip tie. Pull up the lid and slide out the charger-unit. Then close and lock the sliding cover to prevent unauthorized access.

Can I use the charger separately from the suitcase?

Yes, the charger is removable and can be used as a separate unit. Simply remove it as per the instructions and use it independently.

What is the maximum weight the scale can handle?

The maximum capacity depends on suitcase size: Size S: 10 kg, Size M: 15 kg, Size L: 20 kg. The tolerance is ±2.5 kg.

What should I do if the scale displays 'LO' or does not turn on?

This indicates a low battery. Replace the CR2032 battery following the procedure in the manual. Ensure you use an A-brand battery and observe correct polarity.

How do I clean and maintain my Princess Vancouver suitcase?

Clean the exterior with a soft, dry cloth. Avoid exposure to rain or humidity. For the scale, if the ON/OFF button is unresponsive or 'LO' appears, replace the battery. Store in a dry place.

What safety precautions should I follow with the suitcase scale?

Never expose the suitcase to rain or humidity as it may damage the scale. Use only A-brand CR2032 batteries. Handle the scale with care to avoid inaccurate readings or damage.

USER MANUAL Vancouver PRINCESS

Here you can find our instruction manuals.

Below is an overview of our most common instructions for use.

If you don't see the manual you're looking for, don't worry! Let us know via our contact page and one of our colleagues will contact you as soon as possible.

PULL LOCK INSTRUCTIONS

- The lock is set to 0-0-0

- Press the A button in the direction of the arrow

- While holding in the button, choose your 3-digit code by turning the wheels (B)

- Release the button to set your code

- Make sure that you do not release the button while setting the code

PUSH LOCK INSTRUCTIONS

• The lock is set to 0-0-0
• Press the A button in the direction of the arrow
• While holding in the button, choose your 3-digit code by turning the wheels (B)
• Release the button to set your code
• Make sure that you do not release the button while setting the code

SUITCASE WITH A BUILT-IN SCALE

Note: Please read these instructions carefully. Observe the instructions for safe use.

Use the product with care and for the purpose for which it is intended.

Failure to do so may cause the wrong weight to display or potentially cause damage. Store these instructions for future use.

1) SAFETY INSTRUCTIONS

• Never expose the suitcase to rain or humidity. This may cause damage to the scale.
• Only use A-brand CR2032 batteries.

2) SPECIFICATIONS

• Maximum load for suitcases in size S/M/L 10/15/20 kg
- Tolerance ± 2.5kg
- Unit on display kg, lbs

3) INSTRUCTIONS FOR USE

• Place the luggage on a flat surface, with the LCD scale screen facing upwards.
• Press the button marked 'ON/OFF'.
• Once the number zero (0) is displayed on the LCD screen, lift the suitcase by the side handle. Hold the suitcase still for a few seconds.
• The total weight of the luggage will be displayed on the LCD screen.
• Switch off the scale by pressing the 'ON/OFF' button again.
• By pressing the button marked 'KG/LBS', the LCD display will toggle between kilograms and pounds.

4) MAINTENANCE

Check and replace the battery if the scale does not respond to the 'ON/OFF' button, or the display reads 'LO'.

The battery is located on the rear side of the scale, i.e. on the inside of the suitcase. Here you will find a cover.

Slide it open to replace the battery. Pay attention to the positive/negative pole markings.

Diagram of a hand pressing down on a mechanical component with arrows indicating motion (no text or symbols)

Line drawing of a suitcase with upward arrows indicating movement or positioning (no text or symbols)

POWER BOXPOWER BOX

The charger is removable and can also be used as a separate unit.

REMOVING THE CHARGER

Open the zipper inside the suitcase. When using it for the first time, cut off the zip tie.

Pull up the lid and slide out the charger-unit. Close and lock the sliding cover.

Three technical line drawings of a mechanical housing component with cutouts and mounting holes, shown from different angles (no text or symbols present)

PLACING THE CHARGER

Three technical line drawings of a remote control casing (no text or symbols)

LOCKING THE CHARGER

Once you have removed the charger, lock the sliding cover. This will prevent somebody from placing something in your suitcase without you noticing.

Top-down schematic of a device casing with mounting holes and a central internal component (no text or symbols)

TRAVEL LIKE A ROYAL