CE-H23112-S1 - Power strip Siig - Free user manual and instructions

Product Type	Power Strip / Surge Protector
Brand	Siig
Model	CE-H23112-S1
Number of Outlets	6
Input Voltage	230 V AC
Maximum Load	2500 W (10 A)
Cord Length	1.5 m
Dimensions (L x W x H)	30 x 5 x 3 cm
Weight	250 g
Material	Flame-retardant plastic
Surge Protection	Yes, 1000 J
Overload Protection	Yes, resettable circuit breaker
Safety Features	Child safety shutters, overload protection
LED Indicator	Power on/off indicator
Mounting Type	Desktop or wall-mountable (keyhole slots)
Color	White
Operating Temperature	-10°C to 40°C
Certifications	CE, RoHS

Frequently Asked Questions - CE-H23112-S1 Siig

How many devices can I plug into the Siig CE-H23112-S1 power strip?

You can plug up to 6 devices into the standard outlets. However, ensure the total power draw does not exceed 2500 W (10 A).

Does this power strip provide surge protection?

Yes, it features surge protection rated at 1000 Joules to safeguard your electronics from voltage spikes.

Can I use an extension cord with this power strip?

It is not recommended to connect the power strip to an extension cord, as this can lead to overheating and overload. Always plug directly into a wall outlet.

What is the maximum power rating of the CE-H23112-S1?

The maximum load is 2500 W (10 A) for the entire power strip. Do not exceed this limit.

How do I clean the power strip?

Unplug the power strip and wipe it with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners.

Does the power strip have a warranty?

Siig typically offers a limited warranty. Check your product documentation or contact Siig support for details specific to your region.

Can I mount the power strip on a wall?

Yes, the power strip has keyhole slots on the back for wall mounting. Use suitable screws and anchors.

Is this power strip suitable for outdoor use?

No, the CE-H23112-S1 is designed for indoor use only. Keep it away from moisture and extreme temperatures.

Does the power strip include USB charging ports?

No, this model does not have USB ports. It only provides standard AC outlets.

What should I do if the overload switch trips?

Unplug some devices to reduce the load, then press the reset button on the power strip. If it continues to trip, check for a short circuit or reduce the total load.

USER MANUAL CE-H23112-S1 Siig

HDMI Meter Tester with Digital Indicator User Reference Guide

Introduction

The HDMI Meter Tester with Digital Indicator is a handy plug-in device to analyze the signal information of HDMI displays.

Key Features and Benefits

• Detects display resolutions up to 4Kx2K@60Hz
• Detects and displays HDCP version of your HDMI display
• Detects and displays YUV 4:2:0, 4:2:2, or 4:4:4 color space and up to 48-bit color depth
• Built-in Micro USB port to power the adapter

LOT Number Sticker

For future product return or exchange, this LOT number is required. Please keep it for your reference.

LOT Number

Part Number

Layout

Display resolution HDMI (Male) HDCP version Micro-USB (Female) SiIG® 4K/60Hz HDCFy2.2 TUV 4:4:4 SSBt Color space Color depth

Figure 1: HDMI Meter Tester with Digital Indicator

• HDMI (Male): Connects to the HDMI port of your HDMI display
• Display resolution: Indicates the display resolution of your HDMI display
• HDCP version: Indicates the HDCP version of your HDMI display
• Micro-USB (Female): Powers the tester - Connects to the included Micro-USB to USB power cable. Plug the other end of the power cable into a USB power charger or your computer's USB port
  • Color depth: Indicates the color depth by your HDMI monitor or TV
  • Color space: Indicates the color space of your HDMI monitor or TV

Technical Support and Warranty

QUESTIONS? SIIG's Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst will promptly respond.

SIIG offers a 1-year manufacturer warranty with this product. This warranty covers the original purchaser and guarantees the product to be free of any defects in materials or workmanship for one (1) year from the date of purchase of the product. This warranty is not transferable and is available only to the original purchaser of the product.

SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Please see our web site for more warranty details.

If you encounter any problems with this product, please follow the procedures below.

A) If it is within the store's return policy period, please return the product to the store where you purchased from.

B) If your purchase has passed the store's return policy period, please follow the steps below to have the product repaired or replaced.

Step 1: Submit your RMA request.

Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued.

Step 2: After obtaining an RMA number, ship the product.

• Properly pack the product for shipping. All accessories that came with the original package must be included
• Include a copy of your original sales receipt inside the package with date of purchase and place of purchase circled and clearly visible
• Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton
• You are responsible for the cost of shipping to SIIG. Ship the product to the following address:

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA #: ____

• SIIG will ship the repaired or replaced product via Ground in the U.S. and International Economy outside of the U.S. at no cost to the customer

Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio.

SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty. High quality control standards are evident by the overall ease of installation and compatibility of our products, as well as one of the lowest defective return rates in the industry. SIIG products can be found in computer retail stores, mail order catalogs, through major distributors, system integrators, VARs and through e-commerce sites.

PRODUCT NAME

HDMI Meter Tester with Digital Indicator

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

Phone: [phone]

HDMI Meter Tester with Digital Indicator is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective owners.