AC-LK0012-S1 - Câble Siig - Free user manual and instructions

USER MANUAL AC-LK0012-S1 Siig

Simple line icon of a circular object with a horizontal bar, no text or symbols present.

Combination Notebook Lock Quick Installation Guide

Package Contents

• Combination Notebook Lock with coiled steel security cable
• Notebook lock plate
• Quick Installation Guide

Serial Number Sticker

For future product return or exchange, this serial number is required. Please keep it for your reference.

Empty rectangular frame with no text, symbols, or content inside

How to use the Notebook Lock

The combination is pre-set at 0-0-0-0. Line up the preset combination to the red line then pull out the shackle.

Changing the Combination

1. Open the lock, turn the shackle 180 degrees.
2. Press down on the shackle and set the dials to your personal combination.
3. Release the shackle and the lock is ready for use.

Securing your Notebook

1. Place the Notebook Lock Plate into the security docking hole of your notebook.
2. Wrap the steel cable around a stationary object, then thread the shackle through the cable's end loop.
3. Thread the shackle through one of the holes on the lock plate and lock it. Your notebook is now secure.

Detaching the Steel Cable

The shackle must be open before you can detach/attach the cable.

1. Set the combination then open the shackle.
2. Press the button located on the bottom of the lock next to the cable and the cable will disconnect from the lock. To re-attach simply push the cable into the slot.

Technical Support and Warranty

QUESTIONS? SIIG's Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond.

SIIG offers a 2-year manufacturer warranty with this product. Please see our web site for more warranty details. If you encounter any problems with this product, please follow the procedures below.

If it is within the store's return policy period, please return the product to the store where you purchased from. If your purchase has passed the store's return policy period, please follow these steps to have the product repaired or replaced.

Step 1: Submit your RMA request.

Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued.

Step 2: After obtaining an RMA number, ship the product.

• Properly pack the product for shipping. All accessories that came with the original package must be included.
• Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton.

- You are responsible for the cost of shipping. Ship the product to the following address:

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA #: ____

- SIIG will ship the repaired or replaced product via Ground in the U.S. and International Economy outside of the U.S. at no cost to the customer.

Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivity products, including PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards, and other accessories. SIIG is the premier one-stop source of upgrades.

SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty. High-quality control standards are evident by the overall ease of installation and compatibility of our products, as well as one of the lowest defective return rates in the industry. SIIG products can be found in computer retail stores, mail order catalogs, through major distributors, system integrators, and VARs in the Americas and the UK, and through e-commerce sites.

PRODUCT NAME

Combination Notebook Lock

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

Ph: 510-657-8688

Combination Notebook Lock is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Other names used in this publication are for identification only and may be trademarks of their respective companies.

April, 2009

Copyright © 2009 by SIIG, Inc. All rights reserved.