160810 - Loudspeaker MANHATTAN - Free user manual and instructions

Product Type	2.0 Speaker System
Brand	Manhattan
Model	160810 (2500 Series)
Speaker Configuration	2 speakers (stereo pair)
RMS Power Output	3 W x 2 (total 6 W)
Frequency Response	160 Hz – 20 kHz
Signal-to-Noise Ratio (S/N)	≥ 65 dB
Total Harmonic Distortion (THD)	≤ 0.3%
Impedance	4 Ohms
Driver Diameter	3 in (7.6 cm)
Audio Input Connector	3.5 mm stereo
Power Source	AC power cord
Dimensions (W x D x H)	95 x 67 x 175 mm
Magnetic Shielding	Yes (shielded to avoid interference)
Compatible Devices	Computers, CD/DVD players, portable audio players
Controls	Volume knob, power button
Safety Precautions	Keep away from heat, moisture; unplug when not in use
Cleaning Instructions	Wipe with a dry cloth; do not use liquids
Repairability	Refer to qualified technician; do not open cabinet

Frequently Asked Questions - 160810 MANHATTAN

How do I connect the speakers to my computer?

Plug the 3.5 mm audio cable into the headphone or speaker output on your computer. Then connect the power cord to an AC outlet and turn on the speakers using the power button.

Why is there no sound coming from the speakers?

Check that the speakers are powered on and the volume is turned up. Ensure the audio cable is firmly connected to both the speaker and the audio source. Also verify that the source device is outputting audio and not muted.

Can I use these speakers with my TV?

Yes, if your TV has a 3.5 mm audio output or headphone jack. If not, you may need an adapter (e.g., RCA to 3.5 mm). The speakers are magnetically shielded, so they won't interfere with the TV.

How do I clean the speakers?

Use a soft, dry cloth to wipe the exterior. Do not use any liquid cleaners, abrasives, or solvents, as they may damage the surface or electrical components.

What is the power consumption of these speakers?

The speakers have a combined RMS output of 6W. Actual power draw is slightly higher due to amplifier efficiency, typically around 10W under normal use.

Can I use the speakers outdoors?

These speakers are designed for indoor use only. Do not expose them to rain, moisture, or extreme temperatures, as this can cause damage or electrical shock.

How do I adjust the volume?

Turn the volume knob on the front of the speaker. Rotate clockwise to increase volume, counterclockwise to decrease. The power button also controls on/off.

What should I do if I hear static or buzzing noise?

Static may be caused by poor connections or interference. Try re-seating the audio cable, moving the speakers away from other electronic devices, and ensuring the power cord is properly plugged in. If the issue persists, test with a different audio source.

Are these speakers compatible with a Mac?

Yes, as long as your Mac has a 3.5 mm audio output (most models do). They will work with any device that has a standard headphone jack.

Can I mount these speakers on a wall?

The speakers do not have wall-mounting hardware or keyhole slots. They are designed to be placed on a desk or shelf. Do not attempt to modify the cabinet for mounting.

USER MANUAL 160810 MANHATTAN

Two black and silver sound speakers with perforated surfaces, labeled 'MANHATTAN' and 'VOLUME POWER', no visible text beyond labels.

MANHATTAN

BRINGING COMPUTERS TO LIFE

MAN-160810-UM-0606-02

INTRODUCTION

Thank you for purchasing the MANHATTAN® 2500 Series Speaker System, Model 160810. These speakers feature internally powered amplifiers, making them compatible with computers and LD, CD and VCD players, including portable versions of such devices.

These speakers are completely shielded in terms of magnetization, and so will not interfere with the performance or operation of your computer or TV monitor.

INSTALLATION & SETUP

CAUTION: Prior to the installation of your speakers, please read the following safety guidelines to help prevent damage to any electrical components or harm to users.

• Do not place this product or any of its parts near heat or potential heat sources, nor in any moist or damp environment.
• Do not hit, drop or mishandle electrical components in such a way as to loosen, break or otherwise render inoperative any interior or exterior parts.

• Do not remove the back panel except as directed by a qualified technician in order to minimize the possibility of electrical shock. If in need of repair or inspection, bring the speaker(s) to a professional repair person.

• Should liquids or other materials (including fragments of broken parts) get inside the speaker cabinet, immediately shut power off to the speaker and have it professionally inspected and/or repaired before further operation.

• Turn off the power and unplug from power source when the system is not in use.

• Connect the speakers to the Output port of the audio source.

• Plug the power cord into your power source.
• Turn all the function knobs to their original or minimum positions; push the power button to indicate On.
• Adjust the control knobs for the desired effect (clockwise to increase, counterclockwise to decrease).
• Turn all the function knobs to their original or minimum positions; push the power button to indicate Off when the system is not in use.

SPECIFICATIONS

RMS output power 3 W x 2

Frequency response 160 Hz - 20 kHz

Signal-to-noise ratio (S/N) ≥ 65 dB

Total harmonic distortion (THD) ≤ 0.3%

Impedance (front, center, rear) 4 Ohms

Diameter, driver(s) (front, center, rear) 3 in. (7.6 cm)

Connector(s), (included) 3.5 mm

Dimensions 95 x 67 x 175 mm

MANHATTAN

BRINGING COMPUTERS TO LIFE

www.manhattan-products.com

Are you completely satisfied with this product? Please contact your MANHATTAN ^® dealer with comments or questions.

Copyright © MANHATTAN All products mentioned are trademarks or registered trademarks of their respective owners.