CS230TC - Saw MAKITA - Free user manual and instructions
Find the device manual for free CS230TC MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cut-Off Saw |
| Model | CS230TC |
| Brand | Makita |
| Wheel Diameter | 230 mm (9 in) |
| Max Cutting Depth | 70 mm (2-3/4 in) |
| Engine Displacement | 73.6 cm³ |
| Max Output Power | 3.7 kW (5.0 HP) |
| Fuel Type | 2-stroke petrol mixture (50:1) |
| Fuel Tank Capacity | 0.85 L |
| Weight (without cutting equipment) | 10.5 kg (23.1 lbs) |
| Dimensions (L x W x H) | 640 x 245 x 300 mm (25.2 x 9.6 x 11.8 in) |
| Vibration Level (front handle) | 7.5 m/s² |
| Sound Pressure Level | 97 dB(A) |
| Sound Power Level | 108 dB(A) |
| Main Functions | Cutting metal, concrete, stone, pipe, and masonry |
| Maintenance | Clean air filter, replace spark plug, check fuel filter, sharpen blade |
| Safety Features | Chain brake, front hand guard, low kickback chain, throttle interlock |
| Spare Parts Availability | Common spare parts through Makita dealers |
| Reparability | User-serviceable with basic tools; professional service recommended for engine |
| General Information | This tool operates with a 2-stroke engine; use recommended fuel and oil mixture |
Frequently Asked Questions - CS230TC MAKITA
What is the correct fuel mixture for the Makita CS230TC?
The recommended fuel mixture is 50:1 (50 parts unleaded petrol to 1 part 2-stroke oil). Use a high-quality, air-cooled 2-stroke oil.
How do I start the cut-off saw?
1. Set the stop switch to 'ON'. 2. Pull the choke lever to 'CLOSE'. 3. Press the purge bulb until fuel flows. 4. Pull the starter cord quickly until the engine fires. 5. Push the choke lever to 'OPEN' and pull again to start.
How do I change the cutting wheel?
Ensure the engine is off and cool. Lock the spindle using the included wrench, loosen the nut, replace the wheel, and tighten the nut to the recommended torque (approx. 20-25 Nm). Always use a wheel rated for the saw.
What safety gear should I wear when using this saw?
Always wear safety goggles, ear protection, heavy-duty gloves, steel-toe boots, and a hard hat. Use a respirator when cutting concrete or masonry.
How often should I clean the air filter?
Clean the air filter after every 5 hours of use or daily in dusty conditions. Wash with warm soapy water, dry thoroughly, and lightly oil before reinstalling.
What is the maximum cutting depth of the CS230TC?
The maximum cutting depth with a standard 230 mm wheel is approximately 70 mm (2-3/4 inches). For deeper cuts, you may need a larger wheel or a different tool.
Can I use this saw for cutting wood?
This saw is designed primarily for cutting metal, concrete, stone, and masonry. It is not recommended for wood cutting unless equipped with a special wood-cutting blade. Use caution as kickback risk increases.
What should I do if the saw starts but then stops?
Check the fuel mixture and ensure fresh fuel. Clean the air filter and spark plug. Inspect the fuel line for blockages. If the problem persists, consult a Makita service center.
How do I store the saw for long periods?
Drain the fuel tank and run the engine until it stops. Clean the saw thoroughly, lubricate moving parts, and store in a dry place. Remove the spark plug and add a small amount of oil to the cylinder before storage.
What is the warranty period for the Makita CS230TC?
Makita typically offers a 1-year warranty for commercial use and up to 3 years for home use. Check your local dealer or the included warranty card for specific terms.
User questions about CS230TC MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual CS230TC - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CS230TC by MAKITA.