5008MGAJ/1 - Saw MAKITA - Free user manual and instructions
Find the device manual for free 5008MGAJ/1 MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Brand | Makita |
| Model | 5008MGAJ/1 |
| Blade Diameter | 190 mm (7-1/2") |
| Power | 1650 W |
| No Load Speed | 5800 rpm |
| Cutting Depth at 90° | 66 mm |
| Cutting Depth at 45° | 47 mm |
| Weight | 5.2 kg |
| Power Source | AC corded |
| Arbor Size | 20 mm |
| Electric Brake | Yes |
| Soft Start | No |
| Blade Guard | Auto-retracting lower guard |
| Depth Adjustment | Tool-less lever |
| Bevel Capacity | 0-45° |
| Maintenance | Sharpen or replace blade; clean air vents |
| Accessories Included | Hex wrench, rip fence (optional) |
| Safety Features | Double insulation, lock-off switch |
Frequently Asked Questions - 5008MGAJ/1 MAKITA
What is the blade size for the Makita 5008MGAJ/1?
The blade diameter is 190 mm (7-1/2 inches) with a 20 mm arbor.
How do I change the blade on this saw?
Unplug the saw, press the spindle lock, use the supplied hex wrench to loosen the arbor bolt, remove the outer flange and blade, then install the new blade with teeth facing forward and tighten the bolt.
What is the maximum cutting depth?
At 90°, the cutting depth is 66 mm; at 45°, it is 47 mm.
Does the saw have an electric brake?
Yes, the electric brake quickly stops the blade after releasing the trigger.
How do I adjust the bevel angle?
Loosen the bevel adjustment lever, tilt the base to the desired angle (0-45°), and retighten the lever.
What type of power cord does it use?
It uses a standard AC power cord (2-prong plug, double insulated).
Is the saw suitable for cutting metal?
No, this saw is designed for wood and wood-based materials. Use appropriate blades for other materials at your own risk.
How do I maintain the saw for long life?
Keep the air vents clean, lubricate the gear case periodically, check carbon brushes, and ensure the blade is sharp.
What safety precautions should I take?
Always wear eye protection, use the blade guard, keep hands away from the blade, and disconnect power before blade changes.
Can I use a different blade with a smaller arbor?
No, the arbor size is fixed at 20 mm. Use only blades with a 20 mm arbor hole.
User questions about 5008MGAJ/1 MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual 5008MGAJ/1 - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5008MGAJ/1 by MAKITA.