TZR09 - Heating IMETEC - Free user manual and instructions
Find the device manual for free TZR09 IMETEC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fan Heater |
| Brand | Imetec |
| Model | TZR09 |
| Heating Technology | Ceramic |
| Power Settings | 2 (Low / High) |
| Power Consumption | 2000 W |
| Thermostat | Adjustable |
| Fan Modes | Cool air only / Heat |
| Oscillation | Yes |
| Overheat Protection | Yes |
| Tip-Over Switch | Yes |
| Dimensions (W x H x D) | 30 x 25 x 20 cm |
| Weight | 2 kg |
| Noise Level | Low (< 45 dB) |
| Suitable Room Size | Up to 20 m² |
| Power Cord Length | 1.5 m |
| Control Type | Rotary knobs |
| Indicator Light | Yes (power on) |
| Cleaning Method | Wipe with dry cloth |
| Safety Certification | CE |
| Spare Parts Available | Contact Imetec support |
Frequently Asked Questions - TZR09 IMETEC
How do I turn on the Imetec TZR09 heater?
Plug the heater into a power outlet, then turn the rotary knob to the desired power setting (Low or High). The indicator light will illuminate.
Can I use the heater without the fan?
The TZR09 operates with a fan that circulates air. It cannot run with the fan off, but you can select a fan-only mode (no heat) by turning the thermostat to the lowest setting.
How to adjust the thermostat?
Turn the thermostat knob clockwise to increase the desired temperature. The heater will automatically cycle on and off to maintain the set temperature.
What safety features does the TZR09 have?
It includes overheat protection and a tip-over switch that automatically turns off the heater if it is knocked over.
How do I clean the Imetec TZR09?
Unplug the heater and allow it to cool. Wipe the exterior with a dry or slightly damp cloth. Do not use abrasive cleaners or immerse in water.
What is the maximum room size for effective heating?
The heater is suitable for rooms up to approximately 20 square meters (about 215 square feet).
Can the heater be used in a bathroom?
No, the TZR09 is not rated for damp environments. Use it only in dry indoor areas away from water sources.
How to reset the heater after a safety shutdown?
If the heater shuts off due to overheating or tip-over, unplug it, let it cool for 10 minutes, and then plug it back in. Turn the knob to the desired setting.
Where can I find spare parts for the Imetec TZR09?
Contact Imetec customer support or visit their official website for spare parts availability. Always use genuine parts for replacements.
Is the heater noisy?
The fan produces a low noise level below 45 dB, comparable to a quiet conversation. It is suitable for use in bedrooms or offices.
User questions about TZR09 IMETEC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual TZR09 - IMETEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TZR09 by IMETEC.